(Devicecode with scopes only) EM06 Sometimes boots without any AT ports

Chưa có ai nhận issue này.

This problem is independent of devicecode as it can be reproduced with only mmcli running.

See here the EM06
- starts with no AT ports
- reboots with AT ports
- reboots again with AT ports
- reboots last time with no AT ports

```
root@OpenWrt:~/src# mmcli -m 17
-----------------------------------
General | path: /org/freedesktop/ModemManager1/Modem/17
| device id: 8dc5e5c2b5c996215d6759317b8d05c778fae11d
-----------------------------------
Hardware | manufacturer: Quectel
| model: EM06-E
| firmware revision: EM06ELAR03A08M4G
| carrier config: ROW_Generic_3GPP
| carrier config revision: 06010821
| h/w revision: 20000
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id: 866680041259328
-----------------------------------
System | device: /sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2
| drivers: option1, qmi_wwan
| plugin: quectel
| primary port: cdc-wdm0
| ports: cdc-wdm0 (qmi), ttyUSB0 (qcdm), ttyUSB1 (gps), wwan0 (net) <<----- no at ports
-----------------------------------
Status | state: failed
| failed reason: sim-missing
| power state: on
-----------------------------------
Modes | supported: allowed: 3g; preferred: none
| allowed: 4g; preferred: none
| allowed: 3g, 4g; preferred: 4g
| allowed: 3g, 4g; preferred: 3g
| current: allowed: any; preferred: none
-----------------------------------
Bands | supported: utran-1, utran-3, utran-5, utran-8, eutran-1, eutran-3,
| eutran-5, eutran-7, eutran-8, eutran-20, eutran-28, eutran-32,
| eutran-38, eutran-40, eutran-41
-----------------------------------
IP | supported: ipv4, ipv6, ipv4v6

root@OpenWrt:~/src# mmcli -m 17 -r
successfully reseted the modem

root@OpenWrt:~/src# mmcli -m 18
-----------------------------------
General | path: /org/freedesktop/ModemManager1/Modem/18
| device id: 8dc5e5c2b5c996215d6759317b8d05c778fae11d
-----------------------------------
Hardware | manufacturer: Quectel
| model: EM06-E
| firmware revision: EM06ELAR03A08M4G
| carrier config: ROW_Generic_3GPP
| carrier config revision: 06010821
| h/w revision: 20000
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id: 866680041259328
-----------------------------------
System | device: /sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2
| drivers: option1, qmi_wwan
| plugin: quectel
| primary port: cdc-wdm0
| ports: cdc-wdm0 (qmi), ttyUSB0 (qcdm), ttyUSB1 (gps),
| ttyUSB2 (at), ttyUSB3 (at), wwan0 (net) <<---- at ports
-----------------------------------
Status | state: failed
| failed reason: sim-missing
| power state: on
-----------------------------------
Modes | supported: allowed: 3g; preferred: none
| allowed: 4g; preferred: none
| allowed: 3g, 4g; preferred: 4g
| allowed: 3g, 4g; preferred: 3g
| current: allowed: any; preferred: none
-----------------------------------
Bands | supported: utran-1, utran-3, utran-5, utran-8, eutran-1, eutran-3,
| eutran-5, eutran-7, eutran-8, eutran-20, eutran-28, eutran-32,
| eutran-38, eutran-40, eutran-41
-----------------------------------
IP | supported: ipv4, ipv6, ipv4v6

root@OpenWrt:~/src# mmcli -m 18 -r
successfully reseted the modem

root@OpenWrt:~/src# mmcli -m 19
-----------------------------------
General | path: /org/freedesktop/ModemManager1/Modem/19
| device id: 8dc5e5c2b5c996215d6759317b8d05c778fae11d
-----------------------------------
Hardware | manufacturer: Quectel
| model: EM06-E
| firmware revision: EM06ELAR03A08M4G
| carrier config: ROW_Generic_3GPP
| carrier config revision: 06010821
| h/w revision: 20000
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id: 866680041259328
-----------------------------------
System | device: /sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2
| drivers: option1, qmi_wwan
| plugin: quectel
| primary port: cdc-wdm0
| ports: cdc-wdm0 (qmi), ttyUSB0 (qcdm), ttyUSB1 (gps),
| ttyUSB2 (at), ttyUSB3 (at), wwan0 (net) <<----- at ports
-----------------------------------
Status | state: failed
| failed reason: sim-missing
| power state: on
-----------------------------------
Modes | supported: allowed: 3g; preferred: none
| allowed: 4g; preferred: none
| allowed: 3g, 4g; preferred: 4g
| allowed: 3g, 4g; preferred: 3g
| current: allowed: any; preferred: none
-----------------------------------
Bands | supported: utran-1, utran-3, utran-5, utran-8, eutran-1, eutran-3,
| eutran-5, eutran-7, eutran-8, eutran-20, eutran-28, eutran-32,
| eutran-38, eutran-40, eutran-41
-----------------------------------
IP | supported: ipv4, ipv6, ipv4v6

root@OpenWrt:~/src# mmcli -m 19 -r
successfully reseted the modem

root@OpenWrt:~/src# mmcli -m 20
-----------------------------------
General | path: /org/freedesktop/ModemManager1/Modem/20
| device id: 8dc5e5c2b5c996215d6759317b8d05c778fae11d
-----------------------------------
Hardware | manufacturer: Quectel
| model: EM06-E
| firmware revision: EM06ELAR03A08M4G
| carrier config: ROW_Generic_3GPP
| carrier config revision: 06010821
| h/w revision: 20000
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id: 866680041259328
-----------------------------------
System | device: /sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2
| drivers: option1, qmi_wwan
| plugin: quectel
| primary port: cdc-wdm0
| ports: cdc-wdm0 (qmi), ttyUSB0 (qcdm), ttyUSB1 (gps), wwan0 (net) <<----- no at ports
-----------------------------------
Status | state: failed
| failed reason: sim-missing
| power state: on
-----------------------------------
Modes | supported: allowed: 3g; preferred: none
| allowed: 4g; preferred: none
| allowed: 3g, 4g; preferred: 4g
| allowed: 3g, 4g; preferred: 3g
| current: allowed: any; preferred: none
-----------------------------------
Bands | supported: utran-1, utran-3, utran-5, utran-8, eutran-1, eutran-3,
| eutran-5, eutran-7, eutran-8, eutran-20, eutran-28, eutran-32,
| eutran-38, eutran-40, eutran-41
-----------------------------------
IP | supported: ipv4, ipv6, ipv4v6
```

Not going to make a fix for this now (in migration phase) because:
- This is not part of feature parity (EM06 was not compatible at all before)
- I do not have time nor patience for this petty device

Không có tệp nguồn hoặc bài kiểm thử nào được nêu. Hãy bắt đầu bằng cách tái hiện chuỗi thao tác với mmcli -m và các lần reset modem lặp lại trên Quectel EM06-E, sau đó theo dõi cách thiết bị được liệt kê sau mỗi lần khởi động lại. Công việc được xem là hoàn tất khi modem luôn cung cấp các cổng AT thay vì thỉnh thoảng khởi động mà không có chúng.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.