jangala-dev / jangala-dev/devicecode-lua
(Devicecode with scopes only) EM06 Sometimes boots without any AT ports
Ouverte
Personne n'a encore pris cette issue.
- Langage dominant
- Lua
- Étoiles
- 1
- Forks
- 0
- Merge moyen
- 6 j 8 h
- PR mergées (30 j)
- 6
Description
This problem is independent of devicecode as it can be reproduced with only mmcli running.
See here the EM06
- starts with no AT ports
- reboots with AT ports
- reboots again with AT ports
- reboots last time with no AT ports
root@OpenWrt:~/src# mmcli -m 17
-----------------------------------
General | path: /org/freedesktop/ModemManager1/Modem/17
| device id: 8dc5e5c2b5c996215d6759317b8d05c778fae11d
-----------------------------------
Hardware | manufacturer: Quectel
| model: EM06-E
| firmware revision: EM06ELAR03A08M4G
| carrier config: ROW_Generic_3GPP
| carrier config revision: 06010821
| h/w revision: 20000
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id: 866680041259328
-----------------------------------
System | device: /sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2
| drivers: option1, qmi_wwan
| plugin: quectel
| primary port: cdc-wdm0
| ports: cdc-wdm0 (qmi), ttyUSB0 (qcdm), ttyUSB1 (gps), wwan0 (net) <<----- no at ports
-----------------------------------
Status | state: failed
| failed reason: sim-missing
| power state: on
-----------------------------------
Modes | supported: allowed: 3g; preferred: none
| allowed: 4g; preferred: none
| allowed: 3g, 4g; preferred: 4g
| allowed: 3g, 4g; preferred: 3g
| current: allowed: any; preferred: none
-----------------------------------
Bands | supported: utran-1, utran-3, utran-5, utran-8, eutran-1, eutran-3,
| eutran-5, eutran-7, eutran-8, eutran-20, eutran-28, eutran-32,
| eutran-38, eutran-40, eutran-41
-----------------------------------
IP | supported: ipv4, ipv6, ipv4v6
root@OpenWrt:~/src# mmcli -m 17 -r
successfully reseted the modem
root@OpenWrt:~/src# mmcli -m 18
-----------------------------------
General | path: /org/freedesktop/ModemManager1/Modem/18
| device id: 8dc5e5c2b5c996215d6759317b8d05c778fae11d
-----------------------------------
Hardware | manufacturer: Quectel
| model: EM06-E
| firmware revision: EM06ELAR03A08M4G
| carrier config: ROW_Generic_3GPP
| carrier config revision: 06010821
| h/w revision: 20000
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id: 866680041259328
-----------------------------------
System | device: /sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2
| drivers: option1, qmi_wwan
| plugin: quectel
| primary port: cdc-wdm0
| ports: cdc-wdm0 (qmi), ttyUSB0 (qcdm), ttyUSB1 (gps),
| ttyUSB2 (at), ttyUSB3 (at), wwan0 (net) <<---- at ports
-----------------------------------
Status | state: failed
| failed reason: sim-missing
| power state: on
-----------------------------------
Modes | supported: allowed: 3g; preferred: none
| allowed: 4g; preferred: none
| allowed: 3g, 4g; preferred: 4g
| allowed: 3g, 4g; preferred: 3g
| current: allowed: any; preferred: none
-----------------------------------
Bands | supported: utran-1, utran-3, utran-5, utran-8, eutran-1, eutran-3,
| eutran-5, eutran-7, eutran-8, eutran-20, eutran-28, eutran-32,
| eutran-38, eutran-40, eutran-41
-----------------------------------
IP | supported: ipv4, ipv6, ipv4v6
root@OpenWrt:~/src# mmcli -m 18 -r
successfully reseted the modem
root@OpenWrt:~/src# mmcli -m 19
-----------------------------------
General | path: /org/freedesktop/ModemManager1/Modem/19
| device id: 8dc5e5c2b5c996215d6759317b8d05c778fae11d
-----------------------------------
Hardware | manufacturer: Quectel
| model: EM06-E
| firmware revision: EM06ELAR03A08M4G
| carrier config: ROW_Generic_3GPP
| carrier config revision: 06010821
| h/w revision: 20000
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id: 866680041259328
-----------------------------------
System | device: /sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2
| drivers: option1, qmi_wwan
| plugin: quectel
| primary port: cdc-wdm0
| ports: cdc-wdm0 (qmi), ttyUSB0 (qcdm), ttyUSB1 (gps),
| ttyUSB2 (at), ttyUSB3 (at), wwan0 (net) <<----- at ports
-----------------------------------
Status | state: failed
| failed reason: sim-missing
| power state: on
-----------------------------------
Modes | supported: allowed: 3g; preferred: none
| allowed: 4g; preferred: none
| allowed: 3g, 4g; preferred: 4g
| allowed: 3g, 4g; preferred: 3g
| current: allowed: any; preferred: none
-----------------------------------
Bands | supported: utran-1, utran-3, utran-5, utran-8, eutran-1, eutran-3,
| eutran-5, eutran-7, eutran-8, eutran-20, eutran-28, eutran-32,
| eutran-38, eutran-40, eutran-41
-----------------------------------
IP | supported: ipv4, ipv6, ipv4v6
root@OpenWrt:~/src# mmcli -m 19 -r
successfully reseted the modem
root@OpenWrt:~/src# mmcli -m 20
-----------------------------------
General | path: /org/freedesktop/ModemManager1/Modem/20
| device id: 8dc5e5c2b5c996215d6759317b8d05c778fae11d
-----------------------------------
Hardware | manufacturer: Quectel
| model: EM06-E
| firmware revision: EM06ELAR03A08M4G
| carrier config: ROW_Generic_3GPP
| carrier config revision: 06010821
| h/w revision: 20000
| supported: gsm-umts, lte
| current: gsm-umts, lte
| equipment id: 866680041259328
-----------------------------------
System | device: /sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2
| drivers: option1, qmi_wwan
| plugin: quectel
| primary port: cdc-wdm0
| ports: cdc-wdm0 (qmi), ttyUSB0 (qcdm), ttyUSB1 (gps), wwan0 (net) <<----- no at ports
-----------------------------------
Status | state: failed
| failed reason: sim-missing
| power state: on
-----------------------------------
Modes | supported: allowed: 3g; preferred: none
| allowed: 4g; preferred: none
| allowed: 3g, 4g; preferred: 4g
| allowed: 3g, 4g; preferred: 3g
| current: allowed: any; preferred: none
-----------------------------------
Bands | supported: utran-1, utran-3, utran-5, utran-8, eutran-1, eutran-3,
| eutran-5, eutran-7, eutran-8, eutran-20, eutran-28, eutran-32,
| eutran-38, eutran-40, eutran-41
-----------------------------------
IP | supported: ipv4, ipv6, ipv4v6
Not going to make a fix for this now (in migration phase) because:
- This is not part of feature parity (EM06 was not compatible at all before)
- I do not have time nor patience for this petty device
Guide de contribution
Aucun guide de contribution indexé pour ce dépôt
Par où commencer
- Lisez l'issue en entier, puis le guide de contribution du projet.
- Signalez en commentaire que vous la prenez — cela évite que deux personnes fassent le même travail.
- Forkez le dépôt et travaillez sur une branche.
- Ouvrez une pull request qui référence le numéro de l'issue.
Piste de recherche
Aucun fichier source ni aucun test n’est nommé. Commencez par reproduire la séquence avec mmcli -m et des réinitialisations répétées du modem sur le Quectel EM06-E, puis suivez la manière dont le périphérique est énuméré après chaque redémarrage. Le travail est terminé lorsque le modem expose systématiquement ses ports AT au lieu de démarrer par intermittence sans eux.
Rédigé par le modèle d'indexation à partir du texte de l'issue.
Évaluation
- Stack technique
- linux, lua
- Domaine
- embedded-iot, operating-systems
- Type d'issue
- Bug
- Difficulté
- 4/5
- Temps estimé
- 3-5 jours
- Activité
- Calme
- Clarté
- À clarifier
- Accessibilité débutants
- 30/100