micro-ROS / micro-ROS/micro-ROS-Agent
Agent TCP4 not responding to RMW stream or packet
まだ誰も着手していません。
- 主要言語
- C++
- スター
- 201
- フォーク
- 111
- 平均マージ
- 1日 6時間
- マージ済み PR(30日)
- 10
説明
## Issue template
- Hardware description:
Agent running on Ubuntu 22.04 x86)64
Firmware on Raspberry PI Pico W
- RTOS: FreeRTOS
- Installation type: micro_ros_setup
- Version or commit hash: Humble
#### Steps to reproduce the issue
Agent running in TCP4 mode:
$ ros2 run micro_ros_agent micro_ros_agent tcp4 -p 8000
Firmware is using LWIP Sockets under Freertos as a custom transport rmw (rmw_uros_set_custom_transport). Tested both stream and packet communication modes.
#### Expected behavior
Would expect some acknowledge package or activity from the Agent.
#### Actual behavior
Agent is listening on port 8000. It accepts the connection. Data is sent from the firmware to the Agent but no response from the agent.
#### Additional information
I've not managed to find any blogs or code examples using tcp4 comms on the Agent. Can I confirm that this does talk rmw and whether this should be stream or packet mode?
コントリビューションガイド
はじめの一歩
- issue を最後まで読み、次にプロジェクトのコントリビューションガイドを読みます。
- 着手することを issue にコメントします — 二人が同じ作業をするのを防げます。
- リポジトリをフォークし、ブランチを切って変更します。
- issue 番号を参照したプルリクエストを送ります。
調査の方向性
micro_ros_agent tcp4 -p 8000 コマンドと、FreeRTOS 上で LWIP ソケットを使用するファームウェアの rmw_uros_set_custom_transport 設定から始めます。ストリーム通信とパケット通信を比較し、Agent がファームウェアのデータに応答するかを確認します。必要なモードを文書化するか、確認済みの修正を再現してください。
索引モデルが issue の本文から書いたものです。
評価
- 技術スタック
- cpp, raspberry-pi, ubuntu
- 領域
- networking
- issue の種類
- バグ
- 難易度
- 4/5
- 見積もり時間
- 3〜5日
- 活発さ
- 停滞
- 明瞭さ
- 説明が足りない
- 初心者へのやさしさ
- 25/100