micro-ROS / micro-ROS/micro-ROS-Agent
Agent TCP4 not responding to RMW stream or packet
還沒有人認領這個 Issue。
- 主要語言
- C++
- 星號
- 201
- 分支
- 111
- 平均合併
- 1 天 6 小時
- 30 天內合併 PR
- 10
描述
## Issue template
- Hardware description:
Agent running on Ubuntu 22.04 x86)64
Firmware on Raspberry PI Pico W
- RTOS: FreeRTOS
- Installation type: micro_ros_setup
- Version or commit hash: Humble
#### Steps to reproduce the issue
Agent running in TCP4 mode:
$ ros2 run micro_ros_agent micro_ros_agent tcp4 -p 8000
Firmware is using LWIP Sockets under Freertos as a custom transport rmw (rmw_uros_set_custom_transport). Tested both stream and packet communication modes.
#### Expected behavior
Would expect some acknowledge package or activity from the Agent.
#### Actual behavior
Agent is listening on port 8000. It accepts the connection. Data is sent from the firmware to the Agent but no response from the agent.
#### Additional information
I've not managed to find any blogs or code examples using tcp4 comms on the Agent. Can I confirm that this does talk rmw and whether this should be stream or packet mode?
貢獻指南
從這裡開始
- 先讀完整個 Issue,再讀專案的貢獻指南。
- 在 Issue 下留言說明你要接手 —— 這能避免兩個人做同樣的事。
- Fork 儲存庫,在一個分支上完成修改。
- 送出 Pull Request,並在描述裡引用這個 Issue 編號。
研究方向
從 micro_ros_agent tcp4 -p 8000 命令以及韌體中使用 FreeRTOS 上的 LWIP socket 進行的 rmw_uros_set_custom_transport 設定開始。比較串流通訊與封包通訊,並確認 Agent 是否回應韌體資料;記錄所需的模式,或重現一個已確認的修正方案。
由索引模型根據 Issue 內容生成。
評估
- 技術堆疊
- cpp, raspberry-pi, ubuntu
- 領域
- networking
- Issue 類型
- 缺陷
- 難度
- 4/5
- 預估耗時
- 3-5 天
- 活躍度
- 停滯
- 描述清晰度
- 需要釐清
- 新手友好度
- 25/100