BLE central API

Based on the outcome of the API meeting, I've added a first draft of a BLE central API in the [api/BLE/central](https://github.com/arduino/ArduinoCore-API/tree/master/api/BLE/central) folder.

It's probably best to review the examples in the following order:
- [scan.ino](https://github.com/arduino/ArduinoCore-API/blob/master/api/BLE/central/examples/scan/scan.ino): Starts scanning for peripherals and prints out advertisement info. of discovered peripheral
- [scan_callback.ino](https://github.com/arduino/ArduinoCore-API/blob/master/api/BLE/central/examples/scan_callback/scan_callback.ino): Similar to `scan.ino` but callback style
- [led_control.ino](https://github.com/arduino/ArduinoCore-API/blob/master/api/BLE/central/examples/led_control/led_control.ino): Controls the LED on the [101 BLE LED example](https://github.com/01org/corelibs-arduino101/blob/master/libraries/CurieBLE/examples/LED/LED.ino) using a local button
- [sensortag_button.ino](https://github.com/arduino/ArduinoCore-API/blob/master/api/BLE/central/examples/sensortag_button/sensortag_button.ino): Listens to simple key notifications from a TI SensorTag and prints out events to the serial monitor. Similar to Tom's [Node.js sensorTagSlideshow example](https://github.com/tigoe/BluetoothLE-Examples/tree/master/sensorTag/sensorTagSlideshow).
- [peripheral_explorer.ino](https://github.com/arduino/ArduinoCore-API/blob/master/api/BLE/central/examples/peripheral_explorer/peripheral_explorer.ino): Connects to a peripheral and prints out it's services, characteristics, and descriptors. Similar to Tom's [Node.js exploreAsync example](https://github.com/tigoe/BluetoothLE-Examples/blob/master/noble/exploreAsync/explore.js).

Other item's to discuss:
1. Are there too many API's to access attributes of a peripheral? I've added a few to cater for various use cases, however I understand this might make documentation more difficult.
2. Is there a nicer way to handle reading and writing attributes with values (characteristics and descriptors). See [BLERemotePeripheralAttributeWithValue.h](https://github.com/arduino/ArduinoCore-API/blob/master/api/BLE/central/BLERemotePeripheralAttributeWithValue.h). Maybe we can re-use the [UDP](https://github.com/arduino/Arduino/blob/master/hardware/arduino/avr/cores/arduino/Udp.h) style, with `beginWrite`, `Print` API's, and `endWrite`.
3. Class names, they are long now, mostly to avoid clashes with the BLEPeripheral API. In case there are use cases for using both peripheral and central mode at the same time in the future.

cc/ @tigoe @damellis @cmaglie @agdl

api/BLE/central のドラフトと、scan.ino、scan_callback.ino、led_control.ino、sensortag_button.ino、peripheral_explorer.ino の例を確認してください。まず例と BLERemotePeripheralAttributeWithValue.h を読み、その後、API、属性の読み取り/書き込み、クラス名に関する未解決の問題を解決してください。central API の設計について合意され、ドラフトがその決定を反映していれば完了です。

索引モデルが issue の本文から書いたものです。