Full Length Metal Rack Mount – Success!

Just wanted to make a quick post to thank you for providing all the STEP files and instructions to mount the JetKVM! I ended up going with the full width 1U metal plate, and think it turned out pretty well. Including a few pictures below.




I ended up using slightly different materials than what is listed in the repository, so wanted to pass along the specifics in case it's helpful for someone downstream:

### **Front Plate:**

- Purchased via SendCutSend
- **Material:** CRS A36/1008 Mild Steel (.059")
- **Finish:** Powder coating (matte black)
- **Total cost:** $28.56 ($36.78 after tax/shipping)

### **JetKVM Module:**
- Purchased via Fictiv
- **Process**: Multi Jet Fusion (MJF)
- **Material**: PA12 glass beads (Black)
- **Finish**: Vapor smoothing
- **Other**: Heatset insert installation (note: I don't have a soldering iron so picked Fictiv specifically because they were able to add the required inserts). Here's a link to the "drawing" (i.e., glorified screenshot) that I uploaded per their request: [Inserts to be Added (1).pdf](https://github.com/user-attachments/files/20113489/Inserts.to.be.Added.1.pdf)
- **Total Cost**: $97.59 (note: I could probably have brought the cost down to around ~$50 by selecting different materials / doing the inserts myself)

Thanks again to @JaredC01 for making this a possibility!

この issue は、定義された変更というより、プロジェクトの使用に関する報告です。材料仕様と添付された「Inserts to be Added (1).pdf」を読み、リポジトリに取り付けまたは材料に関する適切なドキュメントがある場合は、これらの詳細をそこに記載すべきか判断してください。完了とするには、ドキュメント内の場所を明確に特定し、更新内容について合意する必要がありますが、現時点でこの issue にはそれがありません。

索引モデルが issue の本文から書いたものです。