Full Length Metal Rack Mount – Success!

Just wanted to make a quick post to thank you for providing all the STEP files and instructions to mount the JetKVM! I ended up going with the full width 1U metal plate, and think it turned out pretty well. Including a few pictures below.




I ended up using slightly different materials than what is listed in the repository, so wanted to pass along the specifics in case it's helpful for someone downstream:

### **Front Plate:**

- Purchased via SendCutSend
- **Material:** CRS A36/1008 Mild Steel (.059")
- **Finish:** Powder coating (matte black)
- **Total cost:** $28.56 ($36.78 after tax/shipping)

### **JetKVM Module:**
- Purchased via Fictiv
- **Process**: Multi Jet Fusion (MJF)
- **Material**: PA12 glass beads (Black)
- **Finish**: Vapor smoothing
- **Other**: Heatset insert installation (note: I don't have a soldering iron so picked Fictiv specifically because they were able to add the required inserts). Here's a link to the "drawing" (i.e., glorified screenshot) that I uploaded per their request: [Inserts to be Added (1).pdf](https://github.com/user-attachments/files/20113489/Inserts.to.be.Added.1.pdf)
- **Total Cost**: $97.59 (note: I could probably have brought the cost down to around ~$50 by selecting different materials / doing the inserts myself)

Thanks again to @JaredC01 for making this a possibility!

Este issue es más un informe de uso del proyecto que un cambio definido. Lea las especificaciones de materiales y el archivo adjunto “Inserts to be Added (1).pdf”; si el repositorio tiene un documento adecuado sobre montaje o materiales, determine si estos detalles deben incluirse allí. Para considerarlo terminado, sería necesario identificar claramente una ubicación en la documentación y acordar una actualización, algo que el issue no proporciona actualmente.

Escrito por el modelo de indexación a partir del texto del issue.