Change address of KellerLD device

It will be good if this fuction will be in your code.
I made it by this wa:
`
import smbus
import time

DEVICE = 0x40 # Default device I2C address
COMMAND_MODE = 0xA9
SET_NEW_ADDR = 0x42
SET_NEW_ADDR_HSB = 0x00
SET_NEW_ADDR_LSB = 0x01
bus = smbus.SMBus(1)

#Перевод в режим программирования
bus.write_byte(DEVICE, COMMAND_MODE)

time.sleep(0.01)

#Запись нового адреса
bus.write_i2c_block_data(DEVICE,SET_NEW_ADDR,[SET_NEW_ADDR_HSB,SET_NEW_ADDR_LSB])

time.sleep(0.01)`

After this to read pressure need to turn of CRC section.

No files or tests are named. Review the Python driver's existing I2C address and CRC handling against the supplied smbus sequence, including programming mode and the new-address write. Done means the driver supports changing a KellerLD device address and pressure can be read afterward with the required CRC behavior.

Written by the indexing model from the issue text.