Change address of KellerLD device

It will be good if this fuction will be in your code.
I made it by this wa:
`
import smbus
import time

DEVICE = 0x40 # Default device I2C address
COMMAND_MODE = 0xA9
SET_NEW_ADDR = 0x42
SET_NEW_ADDR_HSB = 0x00
SET_NEW_ADDR_LSB = 0x01
bus = smbus.SMBus(1)

#Перевод в режим программирования
bus.write_byte(DEVICE, COMMAND_MODE)

time.sleep(0.01)

#Запись нового адреса
bus.write_i2c_block_data(DEVICE,SET_NEW_ADDR,[SET_NEW_ADDR_HSB,SET_NEW_ADDR_LSB])

time.sleep(0.01)`

After this to read pressure need to turn of CRC section.