Screens remain blank on Mint 21 Acer Aspire R5 Intel graphics card

I installed the debian installer from this repo.

**lsusb** shows the adapter and **xrandr --listproviders** shows multiple displays (see below) but the displays do not show up when I open the "Displays" app that comes wth Mint. The one used to configure multiple displays.

The screens do display the "Universal Graphics Adapter" message, but then stay blank and go into power saving mode.

When I remove the adapter and plug the screen into an HDMI port, it works. (I only have one HDMI port and plan on having two external screens)

When I tried the solution at https://github.com/AdnanHodzic/displaylink-debian/issues/228#issuecomment-467889348 there was no change

When I tied the solution at https://github.com/AdnanHodzic/displaylink-debian/issues/236#issuecomment-471213411 I lost my GUI (thankfully command line still worked so I could restore the backed up config file)

Host info:
`OS: Linux Mint 21.2 x86_64 `
`Host: Aspire R5-571T V1.06 `
`Kernel: 5.15.0-130-generic `
`Uptime: 13 mins `
`Packages: 2951 (dpkg), 2 (flatpak) `
`Shell: bash 5.1.16 `
`Resolution: 1920x1080 `
`DE: Cinnamon 5.8.4 `
`WM: Mutter (Muffin) `
`WM Theme: Mint-Y-Dark (Mint-Y-Dark) `
`Theme: Mint-Y-Dark [GTK2/3] `
`Icons: Mint-Y [GTK2/3] `
`Terminal: gnome-terminal `
`CPU: Intel i5-7200U (4) @ 3.100GHz `
`GPU: Intel HD Graphics 620 `
`Memory: 3651MiB / 7806MiB `

xrandr info
`xrandr --listproviders`
`Providers: number : 5`
`Provider 0: id: 0x43 cap: 0x9, Source Output, Sink Offload crtcs: 3 outputs: 2 associated providers: 4 name:modesetting`
`Provider 1: id: 0xfd cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 1 name:modesetting`
`Provider 2: id: 0xdc cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 1 name:modesetting`
`Provider 3: id: 0xbb cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 1 name:modesetting`
`Provider 4: id: 0x9a cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 1 name:modesetting`

Debug info:

`Starting Debug ...`
`Did you read Post Installation Guide? https://github.com/AdnanHodzic/displaylink-debian/blob/master/docs/post-install-guide.md [y/N] y`
`Did you read Troubleshooting most common issues? https://github.com/AdnanHodzic/displaylink-debian/blob/master/docs/common-issues.md [y/N] y`
`--------------- Linux system info ----------------`
`Distro: Linuxmint`
`Release: victoria`
`Kernel: 5.15.0-130-generic`
`---------------- DisplayLink info ----------------`
`Driver version: 1.14.7`
`DisplayLink service status: up and running`
`EVDI service version: 1.14.7`
`------------------ Graphics card -----------------`
`Vendor: i915`
`Subsystem: HD`
`VGA: Intel Corporation HD Graphics 620 (rev 02)`
`VGA (3D): `
`X11 version: 21.1.4-2ubuntu1.7~22.04.12`
`X11 configs: /etc/X11/xorg.conf.d/90-xpra-virtual.conf /etc/X11/xorg.conf.d/20-displaylink.conf`
`-------------- DisplayLink xorg.conf -------------`
`File: /etc/X11/xorg.conf.d/20-displaylink.conf`
`Contents:`
` Section "OutputClass"`
` Identifier "DisplayLink"`
` MatchDriver "evdi"`
` Driver "modesetting"`
` Option "AccelMethod" "none"`
`EndSection`
`-------------------- Monitors --------------------`
`Providers: number : 5`
`Provider 0: id: 0x43 cap: 0x9, Source Output, Sink Offload crtcs: 3 outputs: 2 associated providers: 4 name:modesetting`
`Provider 1: id: 0xfd cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 1 name:modesetting`
`Provider 2: id: 0xdc cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 1 name:modesetting`
`Provider 3: id: 0xbb cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 1 name:modesetting`
`Provider 4: id: 0x9a cap: 0x2, Sink Output crtcs: 1 outputs: 1 associated providers: 1 name:modesetting`
`-------------------------------------------------------------------`
`Use this information when submitting an issue (http://bit.ly/2GLDlpY)`
`-------------------------------------------------------------------`