auto-cpufreq doubles power draw (from 25W to 50W) at identical 3.80GHz clock speed

### Fill out information requested in this template, without doing so issue will be ignored & closed!

#### Before submitting an issue, it is strongly recommended to use the **[auto-cpufreq-genAI-chatbot](https://foolcontrol.org/?p=4903)** to get an immediate answer to your question.

### Have you tried?

- [Searching through existing/closed issues](https://github.com/AdnanHodzic/auto-cpufreq/issues) to see if your bug has already been already submitted? yes

- If installation failed with [auto-cpufreq-installer](https://github.com/AdnanHodzic/auto-cpufreq/#auto-cpufreq-installer),have you tried installing auto-cpufreq using [Snap package](https://github.com/AdnanHodzic/auto-cpufreq/#snap-store)? yes (it didnt work in snap store for me anyway)

- Have you tried [configuring auto-cpufreq](https://github.com/AdnanHodzic/auto-cpufreq/#configuring-auto-cpufreq)? yes

- Have you tried suggestions in [troubleshooting section](https://github.com/AdnanHodzic/auto-cpufreq#troubleshooting)? no

### Error output:
```text
Add/paste error output in case of failed installation or other failing component
```
---

### System information:

Add/paste output of:

```
auto-cpufreq --debug

battery count = 1
BAT1 conservation mode is off

-------------------------------------------------------------------------------

Linux distro: Zorin OS 18
Linux kernel: 7.0.0-31-generic
Processor: 13th Gen Intel(R) Core(TM) i7-13650HX
Cores: 20
Architecture: x86_64
Driver: intel_pstate
Platform profile status: Available
Platform profile: balanced
Available platform profiles (5): low-power, balanced, performance, max-power, custom
Platform profile provider: lenovo-wmi-gamezone

Using settings defined in /etc/auto-cpufreq.conf

------------------------------ Current CPU stats ------------------------------

CPU max frequency: 4900 MHz
CPU min frequency: 800 MHz

Core Usage Temperature Frequency
CPU0 4.1% 55 °C 1145 MHz
CPU1 0.0% 55 °C 800 MHz
CPU2 3.9% 54 °C 1769 MHz
CPU3 0.0% 54 °C 800 MHz
CPU4 4.1% 55 °C 1168 MHz
CPU5 0.0% 55 °C 1828 MHz
CPU6 7.8% 55 °C 2343 MHz
CPU7 30.0% 55 °C 2141 MHz
CPU8 6.0% 52 °C 877 MHz
CPU9 0.0% 52 °C 1131 MHz
CPU10 0.0% 54 °C 1539 MHz
CPU11 0.0% 54 °C 800 MHz
CPU12 2.0% 56 °C 1061 MHz
CPU13 0.0% 56 °C 1029 MHz
CPU14 2.0% 56 °C 1038 MHz
CPU15 0.0% 56 °C 955 MHz
CPU16 0.0% 57 °C 970 MHz
CPU17 0.0% 57 °C 1345 MHz
CPU18 2.0% 57 °C 1801 MHz
CPU19 0.0% 57 °C 800 MHz

auto-cpufreq version: 3.1.0

Python: 3.12.3
psutil package: 7.2.2
platform package: 1.0.8
click package: 8.1.6
distro package: 1.9.0

Computer type: Notebook
Battery is: charging

auto-cpufreq system resource consumption:
cpu usage: 0.0 %
memory use: 0.3 %

Total CPU usage: 3.5 %
Total system load: 1.07
Average temp. of all cores: 53.00 °C

Currently using: powersave governor
Currently turbo boost is: on
```

Also please be descriptive about the issue you're reporting, i.e: what you tried & what's the expected behaviour.

---

Hi
so as the title says i noticed that my CPU was very hot (like 85+ degree) when its speed was 3.80hz and power drawn was around 50W+
but when I removed the daemon and tried again (without the app) my temps were around 70-73 degree with same speed and power drawn around 20W+

Reproduce using the exact data in the report: run `auto-cpufreq --debug` with the daemon enabled and disabled, comparing governor, turbo boost, frequency, and power at similar CPU load. Inspect `/etc/auto-cpufreq.conf` and the daemon/config-loading path to confirm which settings are actually applied by the running service. Then rerun `auto-cpufreq --debug` after fixes to verify 3.8GHz no longer causes a sustained 50W+ profile and behavior is stable.

Do mô hình lập chỉ mục viết ra từ nội dung của issue.