void-linux / void-linux/void-docs
ARM Devices - Supported Platforms: Add instructions to make bluetooth work on Raspberry pi 4
Dieses Issue hat noch niemand übernommen.
- Vorherrschende Sprache
- CSS
- Sterne
- 217
- Forks
- 212
- Ø Merge
- 2 T. 21 Std.
- Gemergte PRs (30 T.)
- 1
Beschreibung
Following the instruction on the Bluetooth doc are not enough to make Bluetooth work on Raspberry pi 4 (the Bluetooth device is not found).
This guide shows how to do it (ignore the Arch ARM specifics)
These are the relevant steps on Void:
- Remove the line
dtoverlay=bcmbt(if present) from /boot/config.txt and add the following line to the same file:
dtparam=krnbt=on - Make sure that
enable_uart=0is also in /boot/config.txt. - In /boot/cmdline.txt, remove all references to ttyAMA0
Beitragsleitfaden
Erste Schritte
- Lies das ganze Issue und danach den Beitragsleitfaden des Projekts.
- Schreib ins Issue, dass du es übernimmst — das erspart doppelte Arbeit.
- Forke das Repository und arbeite in einem Branch.
- Öffne einen Pull Request, der die Issue-Nummer nennt.
Rechercherichtung
Beginne mit der Bluetooth-Dokumentation und vergleiche deren Raspberry-Pi-Anleitung mit dem verlinkten Leitfaden und den Void-spezifischen Schritten in diesem Issue. Aktualisiere die relevante Dokumentation, damit sie die Änderungen an /boot/config.txt und /boot/cmdline.txt abdeckt, und überprüfe anschließend, dass die Anweisungen klar erklären, wie Bluetooth auf Raspberry Pi 4 aktiviert werden sollte.
Vom Indexierungsmodell aus dem Issue-Text verfasst.
Bewertung
- Tech-Stack
- raspberry-pi
- Bereich
- documentation, embedded-iot
- Issue-Typ
- Dokumentation
- Schwierigkeit
- 2/5
- Geschätzter Aufwand
- 1-3 Stunden
- Aktivitätsstatus
- Veraltet
- Klarheit
- Klar beschrieben
- Anfängerfreundlichkeit
- 45/100