GDB warning "Failed to set controlling terminal" appears in VS Code Stable but not in VS Code Insiders

Environment

Environment

• OS: Ubuntu Linux
• Architecture: x86_64
• VS Code Stable: 1.133.0
• VS Code Insiders: 1.33.7
• C/C++ extension: 1.32.2
• GDB: GNU gdb (Ubuntu 15.1-1ubuntu1~24.04.1) 15.1
• GCC: gcc (Ubuntu 13.3.0-6ubuntu2~24.04.1) 13.3.0

Bug Summary

When debugging a simple C program using GDB through the Microsoft C/C++ extension, VS Code Stable prints the following warning:

warning: GDB: Failed to set controlling terminal: Operation not permitted

However, the same project and debugging configuration do not produce this warning when using VS Code Insiders.

The C program itself runs normally in both versions.

For example, the program outputs:

Hello world!

After the program exits, VS Code Stable also shows:

[1] + Done "/usr/bin/gdb" --interpreter=mi --tty=${DbgTerm} 0<"/tmp/Microsoft-MIEngine-In-..." 1>"/tmp/Microsoft-MIEngine-Out-..."

Steps to Reproduce

1. Open a simple C project in VS Code Stable.
2. Configure cppdbg with GDB.
3. Start debugging with F5.
4. Observe the integrated terminal.

The following warning appears:

warning: GDB: Failed to set controlling terminal: Operation not permitted

5. Open the same project with the same configuration in VS Code Insiders.
6. Start debugging again.

The warning does not appear in VS Code Insiders.

Expected Behavior

The same debugging configuration should behave consistently between VS Code Stable and VS Code Insiders, or there should be an explanation for why GDB is unable to set the controlling terminal in the Stable version.

Actual Behavior

VS Code Stable:

warning: GDB: Failed to set controlling terminal: Operation not permitted

VS Code Insiders:

No warning

The program itself executes successfully in both cases.

Additional Information

The GDB command launched by VS Code is similar to:

/usr/bin/gdb --interpreter=mi --tty=${DbgTerm}

The warning seems to be related to the controlling terminal / TTY handling rather than the C program itself.

I also noticed that this behavior appeared after VS Code settings/extensions were synchronized. Before synchronization, I did not see this warning.

Is this expected behavior, or could this be a regression/change in the VS Code C/C++ extension or MIEngine?

I would like to understand why VS Code Stable attempts to set the controlling terminal in a way that results in:

Operation not permitted

while VS Code Insiders does not produce the warning.

Bug Summary and Steps to Reproduce

Steps to Reproduce

1. Create a simple C project.
2. Use the following .vscode/launch.json:

{
  "version": "0.2.0",
  "configurations": [
    {
      "name": "C/C++ Runner: Debug Session",
      "type": "cppdbg",
      "request": "launch",
      "args": [],
      "stopAtEntry": false,
      "externalConsole": false,
      "program": "${workspaceFolder}/main.out",
      "cwd": "${workspaceFolder}",
      "MIMode": "gdb",
      "miDebuggerPath": "/usr/bin/gdb",
      "setupCommands": [
        {
          "description": "Enable pretty-printing for gdb",
          "text": "-enable-pretty-printing",
          "ignoreFailures": true
        }
      ],
      "preLaunchTask": "gcc"
    }
  ]
}

3. Make sure /usr/bin/gdb is installed and available.
4. Press F5 to start debugging.
5. The program runs successfully, but the following warning appears in the terminal:

warning: GDB: Failed to set controlling terminal: Operation not permitted

6. The same project and launch.json are opened in VS Code Insiders.
7. Press F5 again.

The warning does not appear in VS Code Insiders.

The program itself runs normally in both versions and outputs:

Hello world!

Debugger Configurations

task.json:
{
    "version": "2.0.0",
    "tasks": [
        {
            "label": "gcc",
            "type": "shell",
            "command": "gcc",
            "args": [
                "-g",
                "${workspaceFolder}/src/*.c",
                "${workspaceFolder}/main/*.c",
                "-o",
                "${workspaceFolder}/main.out",
                "-Wall",
                "-I${workspaceFolder}",
                "-I${workspaceFolder}/include",
                "-I${workspaceFolder}/src",
                "-I${workspaceFolder}/main"
            ],
            "problemMatcher": "$gcc",
            "options": {
                "cwd": "${workspaceFolder}"
            },
            "group": {
                "kind": "build",
                "isDefault": true
            }
        }
    ]
}


launch.json:
{
  "version": "0.2.0",
  "configurations": [
    {
      "name": "C/C++ Runner: Debug Session",
      "type": "cppdbg",
      "request": "launch",
      "args": [],
      "stopAtEntry": false,
      "externalConsole": false,
      "program": "${workspaceFolder}/main.out",
      "cwd": "${workspaceFolder}",
      "MIMode": "gdb",
      "miDebuggerPath": "/usr/bin/gdb",
      "setupCommands": [
        {
          "description": "Enable pretty-printing for gdb",
          "text": "-enable-pretty-printing",
          "ignoreFailures": true
        }
      ],
      "logging": {
        "engineLogging": true,
        "trace": true,
        "traceResponse": true
      },
      "preLaunchTask": "gcc"
    }
  ]
}

Debugger Logs

## Debug Log

The C/C++ extension launches GDB with the following command:


"/usr/bin/gdb" --interpreter=mi --tty=$DbgTerm


The terminal output contains the following warning:


&"warning: GDB: Failed to set controlling terminal: Operation not permitted\n"


The warning is printed to stderr.

The GDB version is:


GNU gdb (Ubuntu 15.1-1ubuntu1~24.04.1) 15.1


The C/C++ extension debug log also reports the following MIEngine version:


VS.Diagnostics.Debugger.ImplementationName: Microsoft.MIDebugEngine
VS.Diagnostics.Debugger.EngineVersion: 17.12.40402.1
VS.Diagnostics.Debugger.HostVersion: 17.12.40402.1
VS.Diagnostics.Debugger.AdapterId: cppdbg
VS.Diagnostics.Debugger.MIMode: gdb
VS.Diagnostics.Debugger.FrameworkVersion: 8.0.2526.11203


The program itself runs successfully and outputs:


Hello world!


The important difference is that the warning occurs when debugging with VS Code Stable, but does not occur when using VS Code Insiders with the same project and debugging configuration.

Other Extensions

No response

Additional Information

No response

Inizia riproducendo l'avviso con i file launch.json e task.json forniti, quindi confronta il comando GDB e i dettagli di MIEngine tra VS Code Stable e Insiders. Analizza la gestione di --tty=${DbgTerm} da parte dell'estensione C/C++ e determina se il comportamento di Stable è previsto o se si tratta di una regressione. Il lavoro è completato quando la causa è stata identificata e il comportamento dell'avviso è stato reso coerente o documentato.