Calibration Mode is not working properly

**MacBook (please complete the following information):**
- MacBook Model: MacBook Air 13" M3 2024
- macOS Version: 26.5.2
- Charger Model: Apple 45W
- Charging Cable: MagSafe 3
- AlDente Pro
- AlDente Version: 1.38
- External Monitor connected? Yes
- MacBook used in Clamshell Mode Yes

**Describe the bug**
Calibration Mode is not working properly. The app notified that it had successfully entered Calibration Mode at the 100% charging step, but the charging process actually stopped and got stuck at 76%.

**To Reproduce**
Steps to reproduce the behavior:
1. Start Calibration Mode.
2. Wait for the app to notify entering Calibration Mode (at the 100% charging step).
3. Observe that the actual battery percentage stops and gets stuck at 76% instead of continuing to charge or behaving as expected.
4. Attempt to manually skip to the discharge step (down to 10%) and then force it back to charge to 100%, but the workaround no longer works.

**Expected Behavior**
The MacBook should continue the calibration process normally (either fully charging to 100% or proceeding to discharge properly according to the calibration cycle) instead of getting stuck at 76%.

**Screenshots and Screen Recordings**

Start by reproducing Calibration Mode with the reported MacBook, macOS, charger, MagSafe cable, external monitor, and clamshell setup, then trace the calibration step where the app reports reaching 100% while the battery remains at 76%. Done means the calibration cycle advances through its charging and discharge steps without getting stuck, including after the reported manual-step workaround is attempted.

由索引模型根据 Issue 内容生成。