No boot on real hardware

When i run the basic example in qemu i get

BdsDxe: loading Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1,0x1)/Ata(Primary,Master,0x0)
BdsDxe: starting Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1,0x1)/Ata(Primary,Master,0x0)
INFO : Framebuffer info: FrameBufferInfo { byte_len: 4096000, width: 1280, height: 800, pixel_format: Bgr, bytes_per_pixel: 4, stride: 1280 }
INFO : UEFI bootloader started
INFO : Using framebuffer at 0x80000000
INFO : Reading configuration from disk was successful
INFO : Trying to load ramdisk via Disk
INFO : Ramdisk not found.
TRACE: exiting boot services
TRACE: switching to new level 4 table
INFO : New page table at: PhysFrame[4KiB](0x101000)
INFO : Elf file loaded at Pointer {
    addr: 0x0000000006051000,
    metadata: 896768,
}
INFO : virtual_address_offset: 0x10000000000
INFO : Handling Segment: Ph64(ProgramHeader64 { type_: Ok(Load), flags: Flags(4), offset: 0, virtual_addr: 0, physical_addr: 0, file_size: 2b74, mem_size: 2b74, align: 1000 })
INFO : Handling Segment: Ph64(ProgramHeader64 { type_: Ok(Load), flags: Flags(5), offset: 2b80, virtual_addr: 3b80, physical_addr: 3b80, file_size: 90a3, mem_size: 90a3, align: 1000 })
INFO : Handling Segment: Ph64(ProgramHeader64 { type_: Ok(Load), flags: Flags(6), offset: bc28, virtual_addr: dc28, physical_addr: dc28, file_size: 1058, mem_size: 13d8, align: 1000 })
INFO : Mapping bss section
INFO : Entry point at: 0x100000043f0
INFO : Creating GDT at PhysAddr(0x121000)
INFO : Map framebuffer
INFO : Allocate bootinfo
INFO : Create Memory Map
INFO : Create bootinfo
INFO : Jumping to kernel entry point at VirtAddr(0x100000043f0)
Entered kernel with boot info: BootInfo { api_version: ApiVersion { version_major: 0, version_minor: 11, version_patch: 16, pre_release: false }, memory_regions: MemoryRegions { ptr: 0x280000000e8, len: 109 }, framebuffer: Some(FrameBuffer { buffer_start: 2199023255552, info: FrameBufferInfo { byte_len: 4096000, width: 1280, height: 800, pixel_format: Bgr, bytes_per_pixel: 4, stride: 1280 } }), physical_memory_offset: None, recursive_index: None, rsdp_addr: Some(125296660), tls_template: None, ramdisk_addr: None, ramdisk_len: 0, kernel_addr: 100995072, kernel_len: 896768, kernel_image_offset: 1099511627776, kernel_stack_bottom: 1649267445760, kernel_stack_len: 81920, _test_sentinel: 0 }

=(^.^)= meow

as expected, but when i run on a real machine i either get nothing at all(black screen) on an old laptop of mine, or only the first line, so
INFO : Framebuffer info: FrameBufferInfo { byte_len: 4096000, width: 1280, height: 800, pixel_format: Bgr, bytes_per_pixel: 4, stride: 1280 }

on an old pc of mine, it doesn't seem that it continues past there and my kernel starts, i tried writing simple kernels that just shut down the PC or send some data over the serial header on the motherboard but nothing ever worked, both machines are UEFI capable and UEFI was used during all of my tests. On the PC neither UEFI nor Legacy boot work, both get the same result, the laptop isn't legacy capable.

Start by reproducing the basic example on the affected real hardware and compare its output with the QEMU log, especially where it stops after framebuffer initialization. The issue does not name a source file or test; done means identifying why boot stops on the reported machines and demonstrating that the kernel proceeds past that point on real hardware.