MT7921 wifi tx urb failed

Start with the mt7921u USB transmit path and the provided kernel log on the Raspberry Pi 3 Model B+ running the listed 6.6.51 kernel. Reproduce the failure using the reported mt7921 setup, then trace the tx urb failed: -71 condition; done means the cause is isolated and transmit errors no longer occur under the same setup.

Describe the bug

mt7921u 1-1.3:1.0: tx urb failed: -71

Steps to reproduce the behaviour

using mt7921.

Device (s)

Raspberry Pi 3 Mod. B+

System

6.6.51+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.51-1+rpt3 (2024-10-08) aarch64 GNU/Linux
Raspberry Pi reference 2024-03-15

Logs

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.6.51+rpt-rpi-v8 (serge@raspberrypi.com) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.51-1+rpt3 (2024-10-08)
[    0.000000] KASLR enabled
[    0.000000] random: crng init done
[    0.000000] Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001e400000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x000000001e400000..0x000000002e3fffff (262144 KiB) map reusable linux,cma
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000037ffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000037ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000037ffffff]
[    0.000000] percpu: Embedded 30 pages/cpu s85672 r8192 d29016 u122880
[    0.000000] pcpu-alloc: s85672 r8192 d29016 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: ARM erratum 843419
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0  vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=fb33757d-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=CN
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 225792
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 598916K/917504K available (13440K kernel code, 2212K rwdata, 4268K rodata, 4864K init, 1083K bss, 56444K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 43242 entries in 169 pages
[    0.000000] ftrace: allocated 169 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000402] Console: colour dummy device 80x25
[    0.000419] printk: console [tty1] enabled
[    0.001275] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.001322] pid_max: default: 32768 minimum: 301
[    0.001437] LSM: initializing lsm=capability,integrity
[    0.001691] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.001745] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.002770] cgroup: Disabling memory control group subsystem
[    0.004824] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.005001] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.005151] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.005508] rcu: Hierarchical SRCU implementation.
[    0.005534] rcu:     Max phase no-delay instances is 1000.
[    0.007736] EFI services will not be available.
[    0.008233] smp: Bringing up secondary CPUs ...
[    0.009023] Detected VIPT I-cache on CPU1
[    0.009174] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.010036] Detected VIPT I-cache on CPU2
[    0.010144] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.010961] Detected VIPT I-cache on CPU3
[    0.011060] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.011169] smp: Brought up 1 node, 4 CPUs
[    0.011297] SMP: Total of 4 processors activated.
[    0.011321] CPU features: detected: 32-bit EL0 Support
[    0.011341] CPU features: detected: 32-bit EL1 Support
[    0.011365] CPU features: detected: CRC32 instructions
[    0.011502] CPU: All CPU(s) started at EL2
[    0.011537] alternatives: applying system-wide alternatives
[    0.014468] devtmpfs: initialized
[    0.027835] Enabled cp15_barrier support
[    0.027901] Enabled setend support
[    0.028141] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.028194] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.039896] pinctrl core: initialized pinctrl subsystem
[    0.040677] DMI not present or invalid.
[    0.041453] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.048237] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.048640] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.049282] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.049423] audit: initializing netlink subsys (disabled)
[    0.049743] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1
[    0.050579] thermal_sys: Registered thermal governor 'step_wise'
[    0.050660] cpuidle: using governor menu
[    0.050978] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.051154] ASID allocator initialised with 32768 entries
[    0.052304] Serial: AMBA PL011 UART driver
[    0.059638] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.064430] platform 3f801000.csi: Fixed dependency cycle(s) with /soc/i2c0mux/i2c@1/imx219@10
[    0.073123] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-08-30T19:19:11, variant start
[    0.077117] raspberrypi-firmware soc:firmware: Firmware hash is 2808975b80149bbfe86844655fe45c7de66fc078
[    0.086087] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[    0.086132] Modules: 0 pages in range for non-PLT usage
[    0.086139] Modules: 517776 pages in range for PLT usage
[    0.090785] bcm2835-dma 3f007000.dma-controller: DMA legacy API manager, dmachans=0x1
[    0.092457] iommu: Default domain type: Translated
[    0.092488] iommu: DMA domain TLB invalidation policy: strict mode
[    0.093016] SCSI subsystem initialized
[    0.094979] usbcore: registered new interface driver usbfs
[    0.095064] usbcore: registered new interface driver hub
[    0.095161] usbcore: registered new device driver usb
[    0.095716] pps_core: LinuxPPS API ver. 1 registered
[    0.095743] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.095799] PTP clock support registered
[    0.097357] vgaarb: loaded
[    0.097974] clocksource: Switched to clocksource arch_sys_counter
[    0.098594] VFS: Disk quotas dquot_6.6.0
[    0.098695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.098865] FS-Cache: Loaded
[    0.099179] CacheFiles: Loaded
[    0.112587] NET: Registered PF_INET protocol family
[    0.113116] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.115299] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.115368] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.115411] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.115548] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.115935] TCP: Hash tables configured (established 8192 bind 8192)
[    0.116323] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear)
[    0.116428] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.116499] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.116742] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.117484] RPC: Registered named UNIX socket transport module.
[    0.117519] RPC: Registered udp transport module.
[    0.117540] RPC: Registered tcp transport module.
[    0.117560] RPC: Registered tcp-with-tls transport module.
[    0.117581] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.117629] PCI: CLS 0 bytes, default 64
[    0.118384] Trying to unpack rootfs image as initramfs...
[    0.122313] kvm [1]: IPA Size Limit: 40 bits
[    0.124143] kvm [1]: Hyp mode initialized successfully
[    1.075939] Freeing initrd memory: 12004K
[    1.734592] Initialise system trusted keyrings
[    1.734984] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    1.735090] zbud: loaded
[    1.736015] NFS: Registering the id_resolver key type
[    1.736064] Key type id_resolver registered
[    1.736086] Key type id_legacy registered
[    1.736130] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.736160] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.737010] Key type asymmetric registered
[    1.737040] Asymmetric key parser 'x509' registered
[    1.737127] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.737356] io scheduler mq-deadline registered
[    1.737384] io scheduler kyber registered
[    1.737438] io scheduler bfq registered
[    1.740390] pinctrl-bcm2835 3f200000.gpio: GPIO_OUT persistence: yes
[    1.743118] simple-framebuffer 3eaf0000.framebuffer: framebuffer at 0x3eaf0000, 0x10a800 bytes
[    1.743174] simple-framebuffer 3eaf0000.framebuffer: format=a8r8g8b8, mode=656x416x32, linelength=2624
[    1.746170] Console: switching to colour frame buffer device 82x26
[    1.748719] simple-framebuffer 3eaf0000.framebuffer: fb0: simplefb registered!
[    1.755740] bcm2835-rng 3f104000.rng: hwrng registered
[    1.757740] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.776149] brd: module loaded
[    1.786291] loop: module loaded
[    1.788590] Loading iSCSI transport class v2.0-870.
[    1.795742] usbcore: registered new device driver r8152-cfgselector
[    1.797358] usbcore: registered new interface driver r8152
[    1.798926] usbcore: registered new interface driver lan78xx
[    1.800414] usbcore: registered new interface driver smsc95xx
[    1.802108] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.531344] Core Release: 2.80a
[    2.532742] Setting default values for core params
[    2.534203] Finished setting default values for core params
[    2.735953] Using Buffer DMA mode
[    2.737341] Periodic Transfer Interrupt Enhancement - disabled
[    2.738741] Multiprocessor Interrupt Enhancement - disabled
[    2.740101] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.741415] Dedicated Tx FIFOs mode

[    2.744047] WARN::dwc_otg_hcd_init:1070: FIQ DMA bounce buffers: virt = ffffffc080baa000 dma = 0x00000000de800000 len=9024
[    2.747773] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    2.753698] dwc_otg: Microframe scheduler enabled

[    2.753746] WARN::hcd_init_fiq:496: MPHI regs_base at ffffffc080065000
[    2.756259] dwc_otg 3f980000.usb: DWC OTG Controller
[    2.757616] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    2.759017] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[    2.760379] Init: Port Power? op_state=1
[    2.761680] Init: Power Port (0)
[    2.763249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    2.765856] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.767308] usb usb1: Product: DWC OTG Controller
[    2.768690] usb usb1: Manufacturer: Linux 6.6.51+rpt-rpi-v8 dwc_otg_hcd
[    2.770127] usb usb1: SerialNumber: 3f980000.usb
[    2.772350] hub 1-0:1.0: USB hub found
[    2.773770] hub 1-0:1.0: 1 port detected
[    2.775825] dwc_otg: FIQ enabled
[    2.775836] dwc_otg: NAK holdoff enabled
[    2.775843] dwc_otg: FIQ split-transaction FSM enabled
[    2.775857] Module dwc_common_port init
[    2.776760] usbcore: registered new interface driver uas
[    2.778214] usbcore: registered new interface driver usb-storage
[    2.780145] mousedev: PS/2 mouse device common for all mice
[    2.784791] sdhci: Secure Digital Host Controller Interface driver
[    2.786249] sdhci: Copyright(c) Pierre Ossman
[    2.787852] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.792021] ledtrig-cpu: registered to indicate activity on CPUs
[    2.793905] hid: raw HID events driver (C) Jiri Kosina
[    2.795430] usbcore: registered new interface driver usbhid
[    2.796798] usbhid: USB HID core driver
[    2.803823] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    2.808097] NET: Registered PF_PACKET protocol family
[    2.809661] Key type dns_resolver registered
[    2.847985] registered taskstats version 1
[    2.849625] Loading compiled-in X.509 certificates
[    2.865302] Key type .fscrypt registered
[    2.867907] Key type fscrypt-provisioning registered
[    2.879108] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    2.881002] 3f201000.serial: ttyAMA1 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
[    2.884072] serial serial0: tty port ttyAMA1 registered
[    2.886118] Indeed it is in host mode hprt0 = 00021501
[    2.892343] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    2.894383] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    2.897468] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.899024] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[    2.926598] sdhost: log_buf @ 0000000069dc87b1 (c2a15000)
[    2.978814] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.982556] of_cfs_init
[    2.984152] of_cfs_init: OK
[    2.985803] clk: Disabling unused clocks
[    2.999673] Freeing unused kernel memory: 4864K
[    3.001220] Run /init as init process
[    3.002539]   with arguments:
[    3.002546]     /init
[    3.002553]   with environment:
[    3.002558]     HOME=/
[    3.002565]     TERM=linux
[    3.023655] mmc1: new high speed SDIO card at address 0001
[    3.078071] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    3.079832] Indeed it is in host mode hprt0 = 00001101
[    3.286525] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[    3.289375] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.294866] hub 1-1:1.0: USB hub found
[    3.296699] hub 1-1:1.0: 4 ports detected
[    3.586015] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.686665] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[    3.689668] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.693066] hub 1-1.1:1.0: USB hub found
[    3.695122] hub 1-1.1:1.0: 3 ports detected
[    3.756517] i2c i2c-11: Added multiplexed i2c bus 0
[    3.758950] platform 3f801000.csi: Fixed dependency cycle(s) with /soc/i2c0mux/i2c@1/imx219@10
[    3.765681] i2c 10-0010: Fixed dependency cycle(s) with /soc/csi@7e801000
[    3.769923] i2c i2c-11: Added multiplexed i2c bus 10
[    3.782111] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
[    3.883829] usb 1-1.3: New USB device found, idVendor=0e8d, idProduct=7961, bcdDevice= 1.00
[    3.887173] usb 1-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    3.887188] usb 1-1.3: Product: Wireless_Device
[    3.887198] usb 1-1.3: Manufacturer: MediaTek Inc.
[    3.887207] usb 1-1.3: SerialNumber: 000000000
[    3.994077] usb 1-1.1.2: new full-speed USB device number 5 using dwc_otg
[    4.097223] usb 1-1.1.2: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice=81.33
[    4.100483] usb 1-1.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    4.103808] usb 1-1.1.2: Product: USB Serial
[    4.186012] usb 1-1.1.3: new high-speed USB device number 6 using dwc_otg
[    4.367286] usb 1-1.1.3: New USB device found, idVendor=152d, idProduct=a580, bcdDevice=12.14
[    4.370549] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.373830] usb 1-1.1.3: Product: SATA JMS576A Storage
[    4.375490] usb 1-1.1.3: Manufacturer: SATA JMS576A Storage
[    4.377094] usb 1-1.1.3: SerialNumber: 88888883756D
[    4.379589] usb 1-1.1.3: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
[    4.382929] usb 1-1.1.3: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
[    4.387733] usb 1-1.1.3: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
[    4.391302] usb 1-1.1.3: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
[    4.394852] usb-storage 1-1.1.3:1.0: USB Mass Storage device detected
[    4.397407] scsi host0: usb-storage 1-1.1.3:1.0
[    4.625999] usb 1-1.1.1: new high-speed USB device number 7 using dwc_otg
[    4.726657] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[    4.730172] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.001030] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[    5.035571] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
[    5.407011] scsi 0:0:0:0: Direct-Access     INTEL SS DSCKKF128G8 SATA 1214 PQ: 0 ANSI: 6
[    5.413809] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    5.419137] sd 0:0:0:0: [sda] Write Protect is off
[    5.421079] sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08
[    5.421537] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.428998]  sda: sda1 sda2
[    5.431588] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.069148] EXT4-fs (sda2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none.
[    7.760817] systemd[1]: System time before build time, advancing clock.
[    7.975185] NET: Registered PF_INET6 protocol family
[    7.978421] Segment Routing with IPv6
[    7.979866] In-situ OAM (IOAM) with IPv6
[    8.053338] systemd[1]: systemd 252.31-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    8.060859] systemd[1]: Detected architecture arm64.
[    8.077296] systemd[1]: Hostname set to <voron0>.
[    9.125533] systemd[1]: Queued start job for default target multi-user.target.
[    9.166503] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[    9.172528] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    9.179994] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    9.186801] systemd[1]: Created slice user.slice - User and Session Slice.
[    9.191565] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[    9.197796] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    9.204691] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    9.210985] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-fb33757d\x2d01.device - /dev/disk/by-partuuid/fb33757d-01...
[    9.217307] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[    9.223606] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    9.230045] systemd[1]: Reached target paths.target - Path Units.
[    9.234449] systemd[1]: Reached target slices.target - Slice Units.
[    9.238713] systemd[1]: Reached target swap.target - Swaps.
[    9.242953] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[    9.249851] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[    9.256335] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    9.264019] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[    9.271113] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    9.278114] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[    9.283691] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    9.290699] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    9.297866] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[    9.322466] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    9.335349] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    9.347938] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[    9.355104] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[    9.368245] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[    9.382443] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[    9.397465] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    9.413015] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[    9.428692] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[    9.443544] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[    9.458537] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[    9.478664] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[    9.495388] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[    9.503323] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[    9.525198] systemd[1]: Starting systemd-journald.service - Journal Service...
[    9.544342] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    9.553777] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    9.578816] fuse: init (API version 7.39)
[    9.616781] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[    9.645882] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    9.679201] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[    9.689750] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[    9.712376] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[    9.721739] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[    9.731382] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    9.741599] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    9.750126] EXT4-fs (sda2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none.
[    9.750474] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[    9.770271] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    9.773482] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[    9.782389] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    9.785590] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[    9.792441] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    9.795619] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[    9.804399] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    9.807866] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[    9.816212] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    9.819690] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[    9.827948] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[    9.836244] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[    9.878443] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[    9.899972] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[    9.907012] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[    9.918678] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[    9.958992] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[    9.965952] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[    9.978363] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[   10.004121] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[   10.043603] systemd[1]: Started systemd-journald.service - Journal Service.
[   10.189519] systemd-journald[247]: Received client request to flush runtime journal.
[   10.215741] systemd-journald[247]: File /var/log/journal/91c6ddc4ba344490b95e3544916f9ed5/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   11.702480] gpio-fan gpio-fan@0: GPIO fan initialized
[   11.757186] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.810421] mc: Linux media interface: v0.10
[   11.819583] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[   11.832481] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[   11.832575] [vc_sm_connected_init]: start
[   11.838336] [vc_sm_connected_init]: installed successfully
[   11.852676] rpi-gpiomem 3f200000.gpiomem: window base 0x3f200000 size 0x00001000
[   11.858227] rpi-gpiomem 3f200000.gpiomem: initialised 1 regions as /dev/gpiomem
[   11.971165] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[   11.972864] videodev: Linux video capture interface: v2.00
[   12.071478] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   12.087713] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[   12.101070] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[   12.102686] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[   12.103501] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[   12.104002] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[   12.104037] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[   12.104059] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[   12.104075] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[   12.104090] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[   12.116530] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[   12.118757] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[   12.123448] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[   12.123950] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[   12.123999] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[   12.124021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[   12.124037] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[   12.124053] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[   12.124404] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[   12.153453] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[   12.153453] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[   12.184695] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[   12.184773] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[   12.193788] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[   12.193848] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[   12.208719] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[   12.208892] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[   12.215626] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[   12.215691] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[   12.230461] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[   12.230540] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[   12.507234] Bluetooth: Core ver 2.22
[   12.507420] NET: Registered PF_BLUETOOTH protocol family
[   12.507432] Bluetooth: HCI device and connection manager initialized
[   12.509689] Bluetooth: HCI socket layer initialized
[   12.509858] Bluetooth: L2CAP socket layer initialized
[   12.509919] Bluetooth: SCO socket layer initialized
[   12.601083] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   12.602032] Bluetooth: HCI UART driver ver 2.3
[   12.602075] Bluetooth: HCI UART protocol H4 registered
[   12.602239] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   12.603024] Bluetooth: HCI UART protocol Broadcom registered
[   12.603820] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[   12.604164] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[   12.659766] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   12.661340] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   12.667121] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   12.668737] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   12.689507] usbcore: registered new interface driver usbserial_generic
[   12.696532] usbserial: USB Serial support registered for generic
[   12.722363] uart-pl011 3f201000.serial: no DMA platform data
[   12.874783] usbcore: registered new interface driver ch341
[   12.874890] usbserial: USB Serial support registered for ch341-uart
[   12.875003] ch341 1-1.1.2:1.0: ch341-uart converter detected
[   12.881091] usb 1-1.1.2: ch341-uart converter now attached to ttyUSB0
[   12.970563] Bluetooth: hci0: BCM: chip id 107
[   12.978238] Bluetooth: hci0: BCM: features 0x2f
[   12.982421] Bluetooth: hci0: BCM4345C0
[   12.982458] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[   12.993696] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,3-model-b-plus.hcd' Patch
[   13.066604] brcmfmac: F1 signature read @0x18000000=0x15264345
[   13.087920] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   13.089779] usbcore: registered new interface driver brcmfmac
[   13.490411] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[   13.498506] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b
[   13.874666] Bluetooth: hci0: BCM: features 0x2f
[   13.876181] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[   13.876212] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[   13.876638] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[   13.882644] usb 1-1.3: reset high-speed USB device number 4 using dwc_otg
[   13.927366] Console: switching to colour dummy device 80x25
[   13.946475] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[   13.948708] Registered IR keymap rc-cec
[   13.948968] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0
[   13.949321] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0
[   13.986471] input: vc4-hdmi HDMI Jack as /devices/platform/soc/3f902000.hdmi/sound/card0/input1
[   14.004561] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[   14.005140] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[   14.005516] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[   14.005828] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[   14.008607] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[   14.008927] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[   14.046689] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[   14.060277] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
[   14.061669] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
[   14.070206] mt7921u 1-1.3:1.0: HW/SW Version: 0x8a108a10, Build Time: 20230526130917a

[   14.078849] usbcore: registered new interface driver mt7921u
[   14.342499] mt7921u 1-1.3:1.0: WM Firmware Version: ____010000, Build Time: 20230526130958
[   14.796166] Adding 1048572k swap on /var/swap.  Priority:-2 extents:7 across:1490940k
[   16.410697] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.410716] Bluetooth: BNEP filters: protocol multicast
[   16.410733] Bluetooth: BNEP socket layer initialized
[   16.421098] Bluetooth: MGMT ver 1.22
[   16.444822] NET: Registered PF_ALG protocol family
[   16.601215] alsactl[599]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[   16.879297] lan78xx 1-1.1.1:1.0 eth0: Link is Down
[   16.916075] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   17.330529] systemd-journald[247]: File /var/log/journal/91c6ddc4ba344490b95e3544916f9ed5/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   21.415088] wlan1: authenticate with 8c:de:f9:22:58:0d
[   21.934978] wlan1: send auth to 8c:de:f9:22:58:0d (try 1/3)
[   21.987861] wlan1: authenticate with 8c:de:f9:22:58:0d
[   21.994695] wlan1: send auth to 8c:de:f9:22:58:0d (try 1/3)
[   22.006394] wlan1: authenticated
[   22.010072] wlan1: associate with 8c:de:f9:22:58:0d (try 1/3)
[   22.025736] wlan1: RX AssocResp from 8c:de:f9:22:58:0d (capab=0x1511 status=0 aid=2)
[   22.060340] wlan1: associated
[   22.560989] wlan1: Limiting TX power to 27 (30 - 3) dBm as advertised by 8c:de:f9:22:58:0d
[   24.242388] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[   24.350445] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[   24.454521] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[   24.558448] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[   24.665644] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[   24.666218] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[   24.667122] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[   24.667525] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[   29.419193] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[   29.531078] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[   29.639348] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[   29.752844] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[   29.866484] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[   29.867035] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[   29.867458] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[   29.867945] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[   35.824211] mmc1: Controller never released inhibit bit(s).
[   35.824375] brcmfmac: brcmf_sdio_read_control: read 1536 control bytes failed: -5
[   35.824390] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame, send NAK
[   36.362875] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[   36.478685] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[   36.594349] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[   36.703031] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[   36.810979] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[   36.811393] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[   36.811819] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[   36.812220] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[   46.392855] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[   46.503015] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[   46.611351] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[   46.719124] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[   46.827207] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[   46.827683] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[   46.828136] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[   46.828611] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[   60.403196] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[   60.515458] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[   60.623189] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[   60.731159] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[   60.839212] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[   60.839702] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[   60.840152] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[   60.840590] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[   80.349510] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[   80.461515] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[   80.565505] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[   80.669427] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[   80.774495] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[   80.774904] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[   80.775263] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[   80.775610] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[   82.875629] Bluetooth: RFCOMM TTY layer initialized
[   82.875703] Bluetooth: RFCOMM socket layer initialized
[   82.875731] Bluetooth: RFCOMM ver 1.11
[  109.375293] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  109.487821] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  109.594606] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  109.706142] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  109.814425] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  109.814864] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  109.815280] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  109.815692] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[  152.382828] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  152.498432] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  152.605874] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  152.713636] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  152.821003] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  152.821425] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  152.821855] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  152.822242] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[  216.399947] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  216.508973] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  216.618241] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  216.727487] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  216.833198] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  216.833691] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  216.834135] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  216.834562] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[  276.241836] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.242020] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.242106] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.308116] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.308174] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.308304] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.308398] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.308565] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.308723] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.308818] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.308983] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.309123] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.309214] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.309332] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.309478] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.309565] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.309711] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.309861] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.309955] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.310100] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.310249] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.310345] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.327050] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.335806] mt7921u 1-1.3:1.0: vendor request req:63 off:8158 failed:-71
[  276.375047] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.375103] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.376166] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.376299] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.376398] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.376513] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.376581] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.376680] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.376805] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.376932] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.377037] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.377129] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.377207] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.377303] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.377407] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.377503] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.377591] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.377724] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.377844] mt7921u 1-1.3:1.0: tx urb failed: -71
[  276.403416] usb 1-1.3: USB disconnect, device number 4
[  276.443844] wlan1: deauthenticating from 8c:de:f9:22:58:0d by local choice (Reason: 3=DEAUTH_LEAVING)
[  277.984809] ------------[ cut here ]------------
[  277.984828] WARNING: CPU: 1 PID: 56 at net/wireless/util.c:1475 cfg80211_calculate_bitrate_he+0x260/0x2c0 [cfg80211]
[  277.985126] Modules linked in: rfcomm ctr ccm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash aes_arm64 aes_generic algif_skcipher af_alg bnep vc4 mt7921u mt7921_common mt792x_lib mt76_connac_lib mt792x_usb mt76_usb snd_soc_hdmi_codec drm_display_helper mt76 cec brcmfmac_wcc mac80211 drm_dma_helper binfmt_misc drm_kms_helper brcmfmac ch341 libarc4 brcmutil snd_soc_core usbserial hci_uart cfg80211 btbcm imx219 v4l2_cci snd_compress regmap_i2c bluetooth snd_pcm_dmaengine raspberrypi_hwmon bcm2835_unicam v4l2_dv_timings v4l2_fwnode bcm2835_v4l2(C) bcm2835_codec(C) ecdh_generic v4l2_async ecc v4l2_mem2mem bcm2835_isp(C) rfkill bcm2835_mmal_vchiq(C) videobuf2_dma_contig videobuf2_vmalloc videobuf2_memops libaes videobuf2_v4l2 snd_bcm2835(C) videodev snd_pcm snd_timer snd raspberrypi_gpiomem videobuf2_common vc_sm_cma(C) mc sg gpio_fan uio_pdrv_genirq uio drm fuse dm_mod drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 i2c_mux_pinctrl i2c_mux i2c_bcm2835
[  277.985372] CPU: 1 PID: 56 Comm: kworker/1:1 Tainted: G         C         6.6.51+rpt-rpi-v8 #1  Debian 1:6.6.51-1+rpt3
[  277.985382] Hardware name: Raspberry Pi 3 Model B Plus Rev 1.3 (DT)
[  277.985388] Workqueue: usb_hub_wq hub_event
[  277.985403] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  277.985411] pc : cfg80211_calculate_bitrate_he+0x260/0x2c0 [cfg80211]
[  277.985588] lr : cfg80211_calculate_bitrate+0x1f0/0x678 [cfg80211]
[  277.985753] sp : ffffffc0805faf60
[  277.985756] x29: ffffffc0805faf60 x28: ffffff8004f67800 x27: 00000000000000c0
[  277.985769] x26: ffffff8004bd0000 x25: ffffff8004df6030 x24: ffffff8004df6000
[  277.985780] x23: 00000000000000d0 x22: ffffff8004df60d0 x21: ffffff8004df6014
[  277.985792] x20: ffffff8004f67838 x19: ffffff8002d80500 x18: 0cea122a0dac8927
[  277.985803] x17: 000000000b9f76c0 x16: 0675091506d65a47 x15: 0000000005cfbb60
[  277.985814] x14: 0240717102625a00 x13: 000000000206cc80 x12: 010f4471011f2ba0
[  277.985825] x11: 0000000000f42400 x10: 0087a238008f9a27 x9 : 000063ff00008556
[  277.985836] x8 : 0000c80100018fff x7 : 000027ff00002c71 x6 : 00003201000042ab
[  277.985848] x5 : 0000000000000003 x4 : 0000000000000003 x3 : 0000180000001aac
[  277.985858] x2 : 00001e0000002154 x1 : 000014000000163a x0 : ffffff8004f67838
[  277.985870] Call trace:
[  277.985875]  cfg80211_calculate_bitrate_he+0x260/0x2c0 [cfg80211]
[  277.986040]  cfg80211_calculate_bitrate+0x1f0/0x678 [cfg80211]
[  277.986203]  nl80211_put_sta_rate+0x64/0x410 [cfg80211]
[  277.986368]  nl80211_send_station+0x730/0xc80 [cfg80211]
[  277.986532]  cfg80211_del_sta_sinfo+0xb8/0x1f0 [cfg80211]
[  277.986697]  __sta_info_destroy_part2+0xe0/0x178 [mac80211]
[  277.986952]  __sta_info_flush+0x134/0x1d8 [mac80211]
[  277.987114]  ieee80211_set_disassoc+0x14c/0x540 [mac80211]
[  277.987274]  ieee80211_mgd_deauth+0x14c/0x4d8 [mac80211]
[  277.987433]  ieee80211_deauth+0x20/0x38 [mac80211]
[  277.987591]  cfg80211_mlme_deauth+0xb4/0x228 [cfg80211]
[  277.987921]  cfg80211_mlme_down+0x88/0x98 [cfg80211]
[  277.988093]  cfg80211_disconnect+0x19c/0x228 [cfg80211]
[  277.988259]  __cfg80211_leave+0x150/0x1b8 [cfg80211]
[  277.988423]  cfg80211_netdev_notifier_call+0x128/0x558 [cfg80211]
[  277.988588]  notifier_call_chain+0x78/0x148
[  277.988599]  raw_notifier_call_chain+0x20/0x38
[  277.988606]  call_netdevice_notifiers_info+0x60/0xb8
[  277.988614]  __dev_close_many+0x68/0x170
[  277.988621]  dev_close_many+0x8c/0x140
[  277.988628]  dev_close+0x70/0x90
[  277.988634]  cfg80211_shutdown_all_interfaces+0x4c/0x110 [cfg80211]
[  277.988801]  ieee80211_remove_interfaces+0x48/0x220 [mac80211]
[  277.989089]  ieee80211_unregister_hw+0x5c/0x138 [mac80211]
[  277.989251]  mt76_unregister_device+0x70/0x98 [mt76]
[  277.989299]  mt792xu_disconnect+0x58/0x5d8 [mt792x_usb]
[  277.989313]  usb_unbind_interface+0x80/0x278
[  277.989325]  device_remove+0x78/0x90
[  277.989334]  device_release_driver_internal+0x1dc/0x238
[  277.989343]  device_release_driver+0x20/0x38
[  277.989349]  bus_remove_device+0xd4/0x120
[  277.989356]  device_del+0x164/0x430
[  277.989365]  usb_disable_device+0xdc/0x1c0
[  277.989373]  usb_disconnect+0xe0/0x2b8
[  277.989380]  hub_event+0x970/0x1540
[  277.989386]  process_one_work+0x148/0x3b8
[  277.989394]  worker_thread+0x32c/0x450
[  277.989401]  kthread+0x11c/0x128
[  277.989410]  ret_from_fork+0x10/0x20
[  277.989419] ---[ end trace 0000000000000000 ]---
[  278.751812] mt7921u 1-1.3:1.0: timed out waiting for pending tx
[  279.039866] usb 1-1.3: new high-speed USB device number 8 using dwc_otg
[  279.141227] usb 1-1.3: New USB device found, idVendor=0e8d, idProduct=7961, bcdDevice= 1.00
[  279.141277] usb 1-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  279.141285] usb 1-1.3: Product: Wireless_Device
[  279.141291] usb 1-1.3: Manufacturer: MediaTek Inc.
[  279.141297] usb 1-1.3: SerialNumber: 000000000
[  279.223780] usb 1-1.3: reset high-speed USB device number 8 using dwc_otg
[  279.354699] mt7921u 1-1.3:1.0: HW/SW Version: 0x8a108a10, Build Time: 20230526130917a

[  279.619957] mt7921u 1-1.3:1.0: WM Firmware Version: ____010000, Build Time: 20230526130958
[  288.320809] wlan1: authenticate with 8c:de:f9:22:58:0d
[  288.850880] wlan1: send auth to 8c:de:f9:22:58:0d (try 1/3)
[  288.909973] wlan1: authenticate with 8c:de:f9:22:58:0d
[  288.918260] wlan1: send auth to 8c:de:f9:22:58:0d (try 1/3)
[  288.950015] wlan1: authenticated
[  288.951807] wlan1: associate with 8c:de:f9:22:58:0d (try 1/3)
[  288.969771] wlan1: RX AssocResp from 8c:de:f9:22:58:0d (capab=0x1511 status=0 aid=2)
[  289.007103] wlan1: associated
[  289.168245] wlan1: Limiting TX power to 27 (30 - 3) dBm as advertised by 8c:de:f9:22:58:0d

Additional context

According to what is said here https://github.com/morrownr/USB-WiFi/issues/410 , it is a kernel driver bug?