GPIO4 unstable switching because of 1-Wire protocol enabled

No source file or test is identified. Start by reproducing the GPIO4 blink behavior on the stated Raspberry Pi Zero 2 W setup with 1-Wire enabled, then trace the relevant Linux GPIO and 1-Wire handling; done means GPIO4 switches reliably as a generic output without breaking 1-Wire support.

Describe the bug

In this thread (https://forums.raspberrypi.com/viewtopic.php?p=2218276#p2218276) it has been concluded that enabling 1-Wire protocol in the Raspberry Pi Configuration window, affects the usage of the GPIO4 pin as a generic I/O pin. This does not happen with I2C and SPI capable pins.

Steps to reproduce the behaviour

Simply running a generic blink.py program when the 1-Wire protocol is enabled shows this behavior of the pin not changing the logic state reliably. 

Here is the test program: 

import RPi.GPIO as GPIO
import time

# Set up GPIO using BCM numbering
GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False)
# Set GPIO 4 as output
led_pin = 4
GPIO.setup(led_pin, GPIO.OUT)

try:
    while True:
        # Turn on the LED
        GPIO.output(led_pin, GPIO.HIGH)
        print("LED ON")
        time.sleep(1)  # Wait for 1 second

        # Turn off the LED
        GPIO.output(led_pin, GPIO.LOW)
        print("LED OFF")
        time.sleep(1)  # Wait for 1 second

except KeyboardInterrupt:
    # Clean up GPIO
    GPIO.cleanup()

Device (s)

Raspberry Pi Zero 2 W

System

Script started on 2024-05-05 20:50:34+02:00 [TERM="xterm-256color" TTY="/dev/pts/0" COLUMNS="80" LINES="24"]
[?2004h]0;sasa@raspberrypi: ~sasa@raspberrypi:~ $ raspinfo
[?2004l
System Information
------------------

Raspberry Pi Zero 2 W Rev 1.0
PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"

Raspberry Pi reference 2024-03-12
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, b9b581e0a62afb7200d4b0b72ec2c43485fd49cc, stage4

Linux raspberrypi 6.1.21-v7+ #1642 SMP Mon Apr  3 17:20:52 BST 2023 armv7l GNU/Linux
Revision	: 902120
Serial		: 000000008f8ab336
Model		: Raspberry Pi Zero 2 W Rev 1.0
Throttled flag  : throttled=0x0
Camera          : supported=0 detected=0, libcamera interfaces=0

Videocore information
---------------------

Mar 17 2023 10:52:42 
Copyright (c) 2012 Broadcom
version 82f3750a65fadae9a38077e3c2e217ad158c8d54 (clean) (release) (start)

alloc failures:     0
compactions:        0
legacy block fails: 0

Filesystem information
----------------------
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/root       29474660 5819096  22396320  21% /
devtmpfs           86904       0     86904   0% /dev
tmpfs             218488       0    218488   0% /dev/shm
tmpfs              87396    1024     86372   2% /run
tmpfs               5120       4      5116   1% /run/lock
/dev/mmcblk0p1    261106   51636    209470  20% /boot
tmpfs              43696      24     43672   1% /run/user/1000

Filename				Type		Size		Used		Priority
/var/swap                               file		102396		43776		-2

Package version information
---------------------------
raspberrypi-ui-mods:
  Installed: 1.20230127
raspberrypi-sys-mods:
  Installed: 20230510~bullseye
openbox:
  Installed: 3.6.1-9+rpt1+deb11u1
lxpanel:
  Installed: 0.10.1-2+rpt19
pcmanfm:
  Installed: 1.3.2-1+rpt9
rpd-plym-splash:
  Installed: 0.32

Networking Information
----------------------

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet x.x.x.x  netmask x.x.x.x
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 23  bytes 2468 (2.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 23  bytes 2468 (2.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        inet6 y.y.y.y.y.y.y.y  prefixlen 64  scopeid 0x0<global>
        inet6 y::y.y.y.y  prefixlen 64  scopeid 0x20<link>
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 3962  bytes 311182 (303.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3751  bytes 1681272 (1.6 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


USB Information
---------------

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M

Display Information
-------------------

Running (F)KMS and X

Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 2048 x 2048
HDMI-1 disconnected primary (normal left inverted right x axis y axis)
	Identifier: 0x43
	Timestamp:  11890
	Subpixel:   unknown
	Clones:    
	CRTCs:      3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	Output format: Automatic 
		supported: Automatic, RGB, YCbCr 4:2:2, YCbCr 4:4:4
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	max bpc: 8 
		range: (8, 12)
	bottom margin: 0 
		range: (0, 100)
	top margin: 0 
		range: (0, 100)
	right margin: 0 
		range: (0, 100)
	left margin: 0 
		range: (0, 100)
	Colorspace: Default 
		supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
	link-status: Good 
		supported: Good, Bad
	CONNECTOR_ID: 32 
		supported: 32
	non-desktop: 0 
		range: (0, 1)

Connector 0 (32) HDMI-A-1 (disconnected)
  Encoder 0 (31) TMDS



/sys/kernel/debug/dri/0/state:
plane[41]: plane-0
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=0
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[58]: plane-1
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=0
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[69]: plane-2
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=0
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[80]: plane-3
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=0
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[91]: plane-4
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=1
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[101]: plane-5
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=2
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[111]: plane-6
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=3
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[121]: plane-7
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=4
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[131]: plane-8
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=5
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[141]: plane-9
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=6
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[151]: plane-10
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=7
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[161]: plane-11
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=8
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[171]: plane-12
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=9
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[181]: plane-13
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=a
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[191]: plane-14
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=b
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[201]: plane-15
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=c
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[211]: plane-16
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=d
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[221]: plane-17
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=e
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[231]: plane-18
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=f
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[241]: plane-19
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=10
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[251]: plane-20
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=11
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[261]: plane-21
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=11
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[271]: plane-22
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=11
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
plane[281]: plane-23
	crtc=(null)
	fb=0
	crtc-pos=0x0+0+0
	src-pos=0.000000x0.000000+0.000000+0.000000
	rotation=1
	normalized-zpos=11
	color-encoding=ITU-R BT.709 YCbCr
	color-range=YCbCr limited range
crtc[51]: txp
	enable=0
	active=0
	self_refresh_active=0
	planes_changed=0
	mode_changed=0
	active_changed=0
	connectors_changed=0
	color_mgmt_changed=0
	plane_mask=0
	connector_mask=0
	encoder_mask=0
	mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[68]: pixelvalve-0
	enable=0
	active=0
	self_refresh_active=0
	planes_changed=0
	mode_changed=0
	active_changed=0
	connectors_changed=0
	color_mgmt_changed=0
	plane_mask=0
	connector_mask=0
	encoder_mask=0
	mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[79]: pixelvalve-1
	enable=0
	active=0
	self_refresh_active=0
	planes_changed=0
	mode_changed=0
	active_changed=0
	connectors_changed=0
	color_mgmt_changed=0
	plane_mask=0
	connector_mask=0
	encoder_mask=0
	mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[90]: pixelvalve-2
	enable=0
	active=0
	self_refresh_active=0
	planes_changed=0
	mode_changed=0
	active_changed=0
	connectors_changed=0
	color_mgmt_changed=0
	plane_mask=0
	connector_mask=0
	encoder_mask=0
	mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
connector[32]: HDMI-A-1
	crtc=(null)
	self_refresh_aware=0
	max_requested_bpc=8
connector[57]: Writeback-1
	crtc=(null)
	self_refresh_aware=0
	max_requested_bpc=0



config.txt
----------

aphy_params_current=819
arm_freq=1000
arm_freq_min=600
audio_pwm_mode=514
camera_auto_detect=1
config_hdmi_boost=5
core_freq=400
desired_osc_freq=0x331df0
disable_commandline_tags=2
disable_l2cache=1
disable_overscan=1
display_auto_detect=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dphy_params_current=547
dvfs=3
enable_tvout=1
enable_uart=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=300
ignore_lcd=1
init_uart_clock=0x2dc6c00
mask_gpu_interrupt0=3072
mask_gpu_interrupt1=26370
max_framebuffers=2
over_voltage_avs=6250
pause_burst_frames=1
program_serial_random=1
sdram_freq=450
total_mem=512
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x9a7ec80
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=

cmdline.txt
-----------
coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i smsc95xx.macaddr=B8:27:EB:8A:B3:36 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  console=ttyS0,115200 console=tty1 root=PARTUUID=255aef08-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles

raspi-gpio settings
-------------------

BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT
GPIO 1: level=1 fsel=0 func=INPUT
GPIO 2: level=1 fsel=4 alt=0 func=SDA1
GPIO 3: level=1 fsel=4 alt=0 func=SCL1
GPIO 4: level=0 fsel=0 func=INPUT
GPIO 5: level=0 fsel=0 func=INPUT
GPIO 6: level=0 fsel=0 func=INPUT
GPIO 7: level=1 fsel=1 func=OUTPUT
GPIO 8: level=1 fsel=1 func=OUTPUT
GPIO 9: level=0 fsel=4 alt=0 func=SPI0_MISO
GPIO 10: level=0 fsel=4 alt=0 func=SPI0_MOSI
GPIO 11: level=0 fsel=4 alt=0 func=SPI0_SCLK
GPIO 12: level=0 fsel=0 func=INPUT
GPIO 13: level=0 fsel=0 func=INPUT
GPIO 14: level=1 fsel=2 alt=5 func=TXD1
GPIO 15: level=1 fsel=2 alt=5 func=RXD1
GPIO 16: level=0 fsel=0 func=INPUT
GPIO 17: level=0 fsel=0 func=INPUT
GPIO 18: level=0 fsel=0 func=INPUT
GPIO 19: level=0 fsel=0 func=INPUT
GPIO 20: level=0 fsel=0 func=INPUT
GPIO 21: level=0 fsel=0 func=INPUT
GPIO 22: level=0 fsel=0 func=INPUT
GPIO 23: level=0 fsel=0 func=INPUT
GPIO 24: level=0 fsel=0 func=INPUT
GPIO 25: level=0 fsel=0 func=INPUT
GPIO 26: level=0 fsel=0 func=INPUT
GPIO 27: level=0 fsel=0 func=INPUT
BANK1 (GPIO 28 to 45):
GPIO 28: level=1 fsel=0 func=INPUT
GPIO 29: level=0 fsel=1 func=OUTPUT
GPIO 30: level=0 fsel=7 alt=3 func=CTS0
GPIO 31: level=0 fsel=7 alt=3 func=RTS0
GPIO 32: level=1 fsel=7 alt=3 func=TXD0
GPIO 33: level=1 fsel=7 alt=3 func=RXD0
GPIO 34: level=1 fsel=7 alt=3 func=SD1_CLK
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0
GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3
GPIO 40: level=0 fsel=1 func=OUTPUT
GPIO 41: level=1 fsel=1 func=OUTPUT
GPIO 42: level=1 fsel=1 func=OUTPUT
GPIO 43: level=1 fsel=4 alt=0 func=GPCLK2
GPIO 44: level=1 fsel=0 func=INPUT
GPIO 45: level=1 fsel=0 func=INPUT
BANK2 (GPIO 46 to 53):
GPIO 46: level=1 fsel=0 func=INPUT
GPIO 47: level=1 fsel=1 func=OUTPUT
GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK
GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD
GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0
GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1
GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2
GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3

vcdbg log messages
------------------

000923.417: brfs: File read: /mfs/sd/config.txt
000924.678: brfs: File read: 2106 bytes
000957.307: HDMI0:EDID error reading EDID block 0 attempt 0
000958.572: HDMI0:EDID error reading EDID block 0 attempt 1
000959.838: HDMI0:EDID error reading EDID block 0 attempt 2
000961.101: HDMI0:EDID error reading EDID block 0 attempt 3
000962.366: HDMI0:EDID error reading EDID block 0 attempt 4
000963.632: HDMI0:EDID error reading EDID block 0 attempt 5
000964.897: HDMI0:EDID error reading EDID block 0 attempt 6
000966.160: HDMI0:EDID error reading EDID block 0 attempt 7
000967.426: HDMI0:EDID error reading EDID block 0 attempt 8
000968.690: HDMI0:EDID error reading EDID block 0 attempt 9
000969.715: HDMI0:EDID giving up on reading EDID block 0
000972.730: brfs: File read: /mfs/sd/config.txt
000974.059: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
001476.041: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
001476.097: *** Restart logging
001476.124: brfs: File read: 2106 bytes
001477.077: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
001478.346: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1
001479.613: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2
001480.883: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3
001482.151: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4
001483.423: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5
001484.692: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6
001485.961: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7
001487.229: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8
001488.499: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9
001489.525: hdmi: HDMI0:EDID giving up on reading EDID block 0
001489.861: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
001491.131: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1
001492.398: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2
001493.679: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3
001494.947: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4
001496.216: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5
001497.483: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6
001498.753: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7
001500.021: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8
001501.291: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9
001502.317: hdmi: HDMI0:EDID giving up on reading EDID block 0
001502.362: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
001502.386: HDMI0: hdmi_pixel_encoding: 162000000
001502.653: vec: vec_middleware_power_on: vec_base: 0x7e806000 rev-id 0x00002708 @ vec: 0x7e806100 @ 0x00000420 enc: 0x7e806060 @ 0x00000220 cgmsae: 0x7e80605c @ 0x00000000
001503.814: kernel=
001512.180: dtb_file 'bcm2710-rpi-zero-2-w.dtb'
001516.207: brfs: File read: /mfs/sd/bcm2710-rpi-zero-2-w.dtb
001516.232: Loaded 'bcm2710-rpi-zero-2-w.dtb' to 0x100 size 0x7a56
001530.600: brfs: File read: 31318 bytes
001539.948: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
001629.028: brfs: File read: 2347 bytes
001632.016: brfs: File read: /mfs/sd/config.txt
001632.536: dtparam: i2c_arm=on
001641.475: dtparam: spi=on
001649.556: dtparam: audio=on
001655.434: brfs: File read: 2106 bytes
001668.534: brfs: File read: /mfs/sd/overlays/vc4-kms-v3d.dtbo
001713.229: Loaded overlay 'vc4-kms-v3d'
001813.517: brfs: File read: 2760 bytes
001815.383: brfs: File read: /mfs/sd/cmdline.txt
001815.445: Read command line from file 'cmdline.txt':
001815.467: 'console=serial0,115200 console=tty1 root=PARTUUID=255aef08-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles'
001832.006: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined
002312.267: brfs: File read: 147 bytes
002706.449: brfs: File read: /mfs/sd/kernel7.img
002706.464: Loaded 'kernel7.img' to 0x8000 size 0x67ebe0
002706.489: Device tree loaded to 0x1bfe7e00 (size 0x810a)
002708.790: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
006452.398: vchiq_core: vchiq_init_state: slot_zero = 0xcbd80000, is_master = 1

dmesg log
---------

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.1.21-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP Mon Apr  3 17:20:52 BST 2023
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi Zero 2 W Rev 1.0
[    0.000000] random: crng init done
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x0bc00000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000001bffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000001bffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]
[    0.000000] percpu: Embedded 17 pages/cpu s36884 r8192 d24556 u69632
[    0.000000] pcpu-alloc: s36884 r8192 d24556 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 113680
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  console=ttyS0,115200 console=tty1 root=PARTUUID=255aef08-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[    0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 173812K/458752K available (10240K kernel code, 1452K rwdata, 2900K rodata, 1024K init, 613K bss, 22796K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 34800 entries in 103 pages
[    0.000000] ftrace: allocated 102 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000017] Switching to timer-based delay loop, resolution 52ns
[    0.000369] Console: colour dummy device 80x30
[    0.000443] printk: console [tty1] enabled
[    0.000496] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000519] pid_max: default: 32768 minimum: 301
[    0.000665] LSM: Security Framework initializing
[    0.000852] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000872] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.001962] cgroup: Disabling memory control group subsystem
[    0.002194] CPU: Testing write buffer coherency: ok
[    0.002572] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003413] cblist_init_generic: Setting adjustable number of callback queues.
[    0.003429] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.003540] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.003675] Setting up static identity map for 0x100000 - 0x10003c
[    0.003810] rcu: Hierarchical SRCU implementation.
[    0.003819] rcu: 	Max phase no-delay instances is 1000.
[    0.004523] smp: Bringing up secondary CPUs ...
[    0.005388] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.006313] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.007160] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.007260] smp: Brought up 1 node, 4 CPUs
[    0.007282] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.007296] CPU: All CPU(s) started in HYP mode.
[    0.007303] CPU: Virtualization extensions available.
[    0.007915] devtmpfs: initialized
[    0.022770] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.022973] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.023002] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.033261] pinctrl core: initialized pinctrl subsystem
[    0.034418] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.037394] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.042426] audit: initializing netlink subsys (disabled)
[    0.042650] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.043256] thermal_sys: Registered thermal governor 'step_wise'
[    0.044275] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.044292] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.044526] Serial: AMBA PL011 UART driver
[    0.050575] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.070080] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:52:42, variant start
[    0.080098] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54
[    0.122473] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.127291] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[    0.128955] SCSI subsystem initialized
[    0.129185] usbcore: registered new interface driver usbfs
[    0.129247] usbcore: registered new interface driver hub
[    0.129299] usbcore: registered new device driver usb
[    0.129514] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.129677] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[    0.129930] pps_core: LinuxPPS API ver. 1 registered
[    0.129941] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.129967] PTP clock support registered
[    2.007211] clocksource: Switched to clocksource arch_sys_counter
[    2.008023] VFS: Disk quotas dquot_6.6.0
[    2.008105] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.008257] FS-Cache: Loaded
[    2.008529] CacheFiles: Loaded
[    2.016952] NET: Registered PF_INET protocol family
[    2.017171] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    2.055985] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.056044] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.056111] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    2.056181] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    2.056353] TCP: Hash tables configured (established 4096 bind 4096)
[    2.056464] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.056504] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.056710] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.057262] RPC: Registered named UNIX socket transport module.
[    2.057275] RPC: Registered udp transport module.
[    2.057283] RPC: Registered tcp transport module.
[    2.057292] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.059031] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    2.104883] Initialise system trusted keyrings
[    2.105272] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    2.114475] zbud: loaded
[    2.116852] NFS: Registering the id_resolver key type
[    2.116896] Key type id_resolver registered
[    2.116906] Key type id_legacy registered
[    2.117030] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.117042] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    2.118374] Key type asymmetric registered
[    2.118387] Asymmetric key parser 'x509' registered
[    2.118561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.118575] io scheduler mq-deadline registered
[    2.118585] io scheduler kyber registered
[    2.121810] simple-framebuffer 1eaa9000.framebuffer: framebuffer at 0x1eaa9000, 0x151800 bytes
[    2.121837] simple-framebuffer 1eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880
[    2.122309] Console: switching to colour frame buffer device 90x30
[    2.126558] simple-framebuffer 1eaa9000.framebuffer: fb0: simplefb registered!
[    2.129508] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    2.131210] bcm2835-rng 3f104000.rng: hwrng registered
[    2.131576] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    2.132368] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    2.142859] brd: module loaded
[    2.150062] loop: module loaded
[    2.150658] Loading iSCSI transport class v2.0-870.
[    2.152072] usbcore: registered new interface driver lan78xx
[    2.152133] usbcore: registered new interface driver smsc95xx
[    2.152161] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.880172] Core Release: 2.80a
[    2.880187] Setting default values for core params
[    2.880212] Finished setting default values for core params
[    3.080468] Using Buffer DMA mode
[    3.080477] Periodic Transfer Interrupt Enhancement - disabled
[    3.080485] Multiprocessor Interrupt Enhancement - disabled
[    3.080495] OTG VER PARAM: 0, OTG VER FLAG: 0
[    3.080533] Dedicated Tx FIFOs mode

[    3.081324] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = 8bd04000 dma = 0xcbd04000 len=9024
[    3.081359] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    3.081374] dwc_otg: Microframe scheduler enabled

[    3.081485] WARN::hcd_init_fiq:457: FIQ on core 1

[    3.081502] WARN::hcd_init_fiq:458: FIQ ASM at 807c4360 length 36

[    3.081521] WARN::hcd_init_fiq:497: MPHI regs_base at 9c810000
[    3.081543] dwc_otg 3f980000.usb: DWC OTG Controller
[    3.081575] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    3.081613] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
[    3.081664] Init: Port Power? op_state=1
[    3.081672] Init: Power Port (0)
[    3.081898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    3.081917] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.081933] usb usb1: Product: DWC OTG Controller
[    3.081944] usb usb1: Manufacturer: Linux 6.1.21-v7+ dwc_otg_hcd
[    3.081957] usb usb1: SerialNumber: 3f980000.usb
[    3.082559] hub 1-0:1.0: USB hub found
[    3.082604] hub 1-0:1.0: 1 port detected
[    3.083209] dwc_otg: FIQ enabled
[    3.083220] dwc_otg: NAK holdoff enabled
[    3.083228] dwc_otg: FIQ split-transaction FSM enabled
[    3.083243] Module dwc_common_port init
[    3.083518] usbcore: registered new interface driver usb-storage
[    3.083697] mousedev: PS/2 mouse device common for all mice
[    3.085875] sdhci: Secure Digital Host Controller Interface driver
[    3.085887] sdhci: Copyright(c) Pierre Ossman
[    3.086152] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.086944] ledtrig-cpu: registered to indicate activity on CPUs
[    3.087298] hid: raw HID events driver (C) Jiri Kosina
[    3.087433] usbcore: registered new interface driver usbhid
[    3.087444] usbhid: USB HID core driver
[    3.087609] bcm2835_vchiq 3f00b840.mailbox: there is not valid maps for state default
[    3.091132] Initializing XFRM netlink socket
[    3.091185] NET: Registered PF_PACKET protocol family
[    3.091280] Key type dns_resolver registered
[    3.092150] Registering SWP/SWPB emulation handler
[    3.092813] registered taskstats version 1
[    3.092867] Loading compiled-in X.509 certificates
[    3.093663] Key type .fscrypt registered
[    3.093675] Key type fscrypt-provisioning registered
[    3.105029] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    3.105172] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
[    3.106646] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default
[    3.107018] printk: console [ttyS0] disabled
[    3.107111] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 86, base_baud = 50000000) is a 16550
[    3.107553] printk: console [ttyS0] enabled
[    3.108594] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    3.108881] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    3.110135] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    3.110154] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[    3.140810] sdhost: log_buf @ 27b85bb2 (cbd03000)
[    3.187242] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    3.189405] of_cfs_init
[    3.189595] of_cfs_init: OK
[    3.190548] Waiting for root device PARTUUID=255aef08-02...
[    3.221337] mmc0: host does not support reading read-only switch, assuming write-enable
[    3.223896] mmc0: new high speed SDHC card at address 5048
[    3.224712] mmcblk0: mmc0:5048 SD32G 28.9 GiB 
[    3.227037]  mmcblk0: p1 p2
[    3.227669] mmcblk0: mmc0:5048 SD32G 28.9 GiB
[    3.256887] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    3.256906] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    3.277096] mmc1: new high speed SDIO card at address 0001
[    3.446025] EXT4-fs (mmcblk0p2): recovery complete
[    3.447617] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[    3.447707] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    3.448695] devtmpfs: mounted
[    3.454262] Freeing unused kernel image (initmem) memory: 1024K
[    3.454756] Run /sbin/init as init process
[    3.454768]   with arguments:
[    3.454775]     /sbin/init
[    3.454784]     splash
[    3.454793]   with environment:
[    3.454801]     HOME=/
[    3.454809]     TERM=linux
[    3.974930] systemd[1]: System time before build time, advancing clock.
[    4.228964] NET: Registered PF_INET6 protocol family
[    4.230345] Segment Routing with IPv6
[    4.230394] In-situ OAM (IOAM) with IPv6
[    4.315132] systemd[1]: systemd 247.3-7+rpi1+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    4.316191] systemd[1]: Detected architecture arm.
[    4.318036] systemd[1]: Set hostname to <raspberrypi>.
[    5.220615] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    5.479207] systemd[1]: Queued start job for default target Graphical Interface.
[    5.531485] systemd[1]: Created slice system-getty.slice.
[    5.532906] systemd[1]: Created slice system-modprobe.slice.
[    5.534001] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    5.535032] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.535828] systemd[1]: Created slice User and Session Slice.
[    5.536391] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.537684] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.539053] systemd[1]: Reached target Slices.
[    5.539293] systemd[1]: Reached target Swap.
[    5.540513] systemd[1]: Listening on Syslog Socket.
[    5.541253] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.541686] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    5.542931] systemd[1]: Listening on Journal Audit Socket.
[    5.543641] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.544481] systemd[1]: Listening on Journal Socket.
[    5.546699] systemd[1]: Listening on udev Control Socket.
[    5.547500] systemd[1]: Listening on udev Kernel Socket.
[    5.548744] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    5.553369] systemd[1]: Mounting POSIX Message Queue File System...
[    5.558558] systemd[1]: Mounting RPC Pipe File System...
[    5.564483] systemd[1]: Mounting Kernel Debug File System...
[    5.570408] systemd[1]: Mounting Kernel Trace File System...
[    5.571081] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[    5.579971] systemd[1]: Starting Restore / save the current clock...
[    5.586766] systemd[1]: Starting Set the console keyboard layout...
[    5.593326] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    5.599989] systemd[1]: Starting Load Kernel Module configfs...
[    5.606390] systemd[1]: Starting Load Kernel Module drm...
[    5.613130] systemd[1]: Starting Load Kernel Module fuse...
[    5.633095] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    5.638944] systemd[1]: Starting File System Check on Root Device...
[    5.650307] systemd[1]: Starting Journal Service...
[    5.661879] systemd[1]: Starting Load Kernel Modules...
[    5.668427] systemd[1]: Starting Coldplug All udev Devices...
[    5.693366] systemd[1]: Mounted POSIX Message Queue File System.
[    5.694338] systemd[1]: Mounted RPC Pipe File System.
[    5.718078] systemd[1]: Mounted Kernel Debug File System.
[    5.718822] systemd[1]: Mounted Kernel Trace File System.
[    5.729350] systemd[1]: Finished Restore / save the current clock.
[    5.731954] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    5.733836] systemd[1]: modprobe@configfs.service: Succeeded.
[    5.734962] systemd[1]: Finished Load Kernel Module configfs.
[    5.746898] systemd[1]: Mounting Kernel Configuration File System...
[    5.759844] systemd[1]: Started File System Check Daemon to report status.
[    5.765083] fuse: init (API version 7.37)
[    5.771786] systemd[1]: Mounted Kernel Configuration File System.
[    5.777172] systemd[1]: modprobe@fuse.service: Succeeded.
[    5.779261] systemd[1]: Finished Load Kernel Module fuse.
[    5.786050] systemd[1]: Mounting FUSE Control File System...
[    5.798604] i2c_dev: i2c /dev entries driver
[    5.804497] systemd[1]: Finished Load Kernel Modules.
[    5.818004] systemd[1]: Mounted FUSE Control File System.
[    5.831969] systemd[1]: Starting Apply Kernel Variables...
[    5.928093] systemd[1]: modprobe@drm.service: Succeeded.
[    5.929329] systemd[1]: Finished Load Kernel Module drm.
[    5.958607] systemd[1]: Finished Apply Kernel Variables.
[    5.996518] systemd[1]: Started Journal Service.
[    6.231961] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[    6.310632] systemd-journald[128]: Received client request to flush runtime journal.
[    6.322523] systemd-journald[128]: File /var/log/journal/c50711eaaddd4d2188798334c8206ef8/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    7.676473] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    7.701606] mc: Linux media interface: v0.10
[    7.718821] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    7.718858] [vc_sm_connected_init]: start
[    7.740455] [vc_sm_connected_init]: installed successfully
[    7.974065] videodev: Linux video capture interface: v2.00
[    7.993416] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    8.104755] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    8.129311] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    8.159893] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    8.172888] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    8.174267] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    8.174635] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    8.174961] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    8.175226] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    8.175258] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    8.175280] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    8.175299] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    8.175317] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    8.178190] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[    8.178633] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[    8.178999] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[    8.179309] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[    8.179344] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    8.179369] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    8.179387] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    8.179404] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    8.179644] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    8.237361] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    8.286995] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    8.287053] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    8.296520] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    8.296577] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    8.303782] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    8.303839] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    8.306093] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[    8.306156] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[    8.310636] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[    8.310689] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[    8.465397] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.617316] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.651018] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[    8.987686] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[    8.998237] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43436s-sdio for chip BCM43430/1
[    8.998876] usbcore: registered new interface driver brcmfmac
[    9.052294] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43436s-sdio.clm_blob failed with error -2
[    9.230767] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[    9.231392] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jun 14 2023 07:27:45 version 7.45.96.s1 (gf031a129) FWID 01-70bd2af7 es7
[    9.380359] Console: switching to colour dummy device 80x30
[    9.383962] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[    9.386041] Registered IR keymap rc-cec
[    9.386311] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0
[    9.386582] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0
[    9.392987] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[    9.393627] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[    9.394121] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[    9.394572] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[    9.394994] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[    9.395368] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[    9.408067] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[    9.409394] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
[   10.283127] uart-pl011 3f201000.serial: no DMA platform data
[   10.415341] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[   10.948437] 8021q: 802.1Q VLAN Support v1.8
[   11.545773] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   15.753182] systemd-journald[128]: File /var/log/journal/c50711eaaddd4d2188798334c8206ef8/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   16.566577] Bluetooth: Core ver 2.22
[   16.566693] NET: Registered PF_BLUETOOTH protocol family
[   16.566700] Bluetooth: HCI device and connection manager initialized
[   16.566725] Bluetooth: HCI socket layer initialized
[   16.566737] Bluetooth: L2CAP socket layer initialized
[   16.566756] Bluetooth: SCO socket layer initialized
[   16.604148] Bluetooth: HCI UART driver ver 2.3
[   16.604175] Bluetooth: HCI UART protocol H4 registered
[   16.604263] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   16.604426] Bluetooth: HCI UART pro

Logs

No response

Additional context

Note in the program itself, there is no call for the 1-Wire protocol. It is just enabled as an option to the Pi's GPIOs.

Personally, I consider this a bug, because if you are unaware of this behavior, and pin GPIO4 is critical to your application, a lot of debugging can go in to this. Especially that the hardware I2C ans SPI buses do not cause a similar affect.
I did not find a similar bug report.

Thank you for your time and this wonderful platform!