brcmfmac: brcmf_set_channel: set chanspec fail, reason -52

Open
#6,049 135 comments 24 reactions 0 assignees View on GitHub

Nobody has claimed this yet.

Assessment

Difficulty
4/5
Estimated time
3-5 days
Newbie friendliness
32/100
Issue type
Bug
Clarity
Needs clarification
Activity status
Quiet
Tech stack
c, linux, raspberry-pi

Research direction

No source file or test is named. Start by tracing the brcmfmac brcmf_set_channel path and reproduce the failure while NetworkManager starts, collecting the relevant dmesg output alongside the Raspberry Pi 5 and kernel details. Done means identifying the cause of reason -52 and providing a verified driver fix or clear evidence that it is outside the kernel.

Written by the indexing model from the issue text.

Description

Describe the bug

I used the rpi5 with Mcuzone MPS2280P hat for SSD, I booted the archlinux arm from nvme SSD with linux-rpi.

RPi 5 still suddenly disconnects the internet and SSH and reports brcmfmac: brcmf_set_channel: set chanspec fail, reason -52 , especially when RPi 5 has file IO and msg output, for example, updating system, journalctl, downloading/uploading sth from/to internet

After extra settings (see Additional context), strangely, when I initially trigger to connect the internet this issue won't present, when the internet was reconnected, it would present, so this is quite similar to the issue reported to the linux kernel, see
this mail list discussion, however, I'm still not sure, because after re-connecting the internet, it can't use internet like what additional note1 mentioned.

Without netctl/iwd/networkmanager starts, it's impossible to report

Steps to reproduce the behaviour

When I start the NetworkManger on Arch Linux ARM, I got the debug msg

brcmfmac: brcmf_set_channel: set chanspec ????? fail, reason -52
Device (s)

Raspberry Pi 5

System
# cat /etc/issue
Arch Linux \r (\l)

# vcgencmd version
2024/02/16 15:28:41 
Copyright (c) 2012 Broadcom
version 4c845bd3 (release) (embedded)
# uname -a
Linux fruticicola 6.6.21-2-rpi #1 SMP PREEMPT Wed Mar 13 14:11:28 MDT 2024 aarch64 GNU/Linux
Logs

dmesg

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[    0.000000] Linux version 6.6.21-2-rpi (builduser@leming) (aarch64-unknown-linux-gnu-gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Wed Mar 13 14:11:28 MDT 2024
[    0.000000] KASLR enabled
[    0.000000] random: crng init done
[    0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000002000000, size 320 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] OF: reserved mem: 0x0000000002000000..0x0000000015ffffff (327680 KiB) map reusable linux,cma
[    0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
[    0.000000] OF: reserved mem: 0x000000003fd165a0..0x000000003fd165e4 (0 KiB) nomap non-reusable nvram@0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000007ffff]
[    0.000000]   node   0: [mem 0x0000000000080000-0x000000003f7fffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] On node 0, zone DMA: 2048 pages in unavailable ranges
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 30 pages/cpu s85416 r8192 d29272 u122880
[    0.000000] pcpu-alloc: s85416 r8192 d29272 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Hardware dirty bit management
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=D8:3A:DD:E8:8E:21 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  root=/dev/nvme0n1p2 rw rootwait console=ttyAMA10,115200 console=tty1 fsck.repair=yes
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2062336
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 7789120K/8380416K available (14528K kernel code, 2300K rwdata, 4528K rodata, 5056K init, 1049K bss, 263616K reserved, 327680K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 45526 entries in 178 pages
[    0.000000] ftrace: allocated 178 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000150] Console: colour dummy device 80x25
[    0.000154] printk: console [tty1] enabled
[    0.000316] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000325] pid_max: default: 32768 minimum: 301
[    0.000356] LSM: initializing lsm=capability,integrity
[    0.000418] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000445] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000764] cgroup: Disabling memory control group subsystem
[    0.001222] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.001266] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.001299] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.001379] rcu: Hierarchical SRCU implementation.
[    0.001383] rcu: 	Max phase no-delay instances is 1000.
[    0.001996] EFI services will not be available.
[    0.002100] smp: Bringing up secondary CPUs ...
[    0.002300] Detected PIPT I-cache on CPU1
[    0.002345] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[    0.002565] Detected PIPT I-cache on CPU2
[    0.002599] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[    0.002812] Detected PIPT I-cache on CPU3
[    0.002843] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[    0.002872] smp: Brought up 1 node, 4 CPUs
[    0.002891] SMP: Total of 4 processors activated.
[    0.002895] CPU features: detected: 32-bit EL0 Support
[    0.002899] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.002904] CPU features: detected: Common not Private translations
[    0.002907] CPU features: detected: CRC32 instructions
[    0.002912] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.002915] CPU features: detected: LSE atomic instructions
[    0.002919] CPU features: detected: Privileged Access Never
[    0.002922] CPU features: detected: RAS Extension Support
[    0.002926] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.002965] CPU: All CPU(s) started at EL2
[    0.002969] alternatives: applying system-wide alternatives
[    0.004978] devtmpfs: initialized
[    0.007973] Enabled cp15_barrier support
[    0.007982] Enabled setend support
[    0.008033] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.008043] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.011411] pinctrl core: initialized pinctrl subsystem
[    0.011554] DMI not present or invalid.
[    0.011723] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.012205] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.012270] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.012363] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.012384] audit: initializing netlink subsys (disabled)
[    0.012440] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[    0.012575] thermal_sys: Registered thermal governor 'step_wise'
[    0.012589] cpuidle: using governor menu
[    0.012651] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.012684] ASID allocator initialised with 32768 entries
[    0.012975] Serial: AMBA PL011 UART driver
[    0.013936] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[    0.014292] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
[    0.014305] printk: console [ttyAMA10] enabled
[    0.740830] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-02-16T15:28:41, variant start_cd
[    0.754885] raspberrypi-firmware soc:firmware: Firmware hash is 4c845bd300000000000000000000000000000000
[    0.770830] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[    0.777911] Modules: 0 pages in range for non-PLT usage
[    0.777913] Modules: 517376 pages in range for PLT usage
[    0.855181] raid6: neonx8   gen()  7929 MB/s
[    0.932817] raid6: neonx4   gen()  7872 MB/s
[    1.005121] raid6: neonx2   gen()  6654 MB/s
[    1.077426] raid6: neonx1   gen()  5264 MB/s
[    1.149741] raid6: int64x8  gen()  3504 MB/s
[    1.222050] raid6: int64x4  gen()  3688 MB/s
[    1.294355] raid6: int64x2  gen()  3079 MB/s
[    1.366665] raid6: int64x1  gen()  2532 MB/s
[    1.370947] raid6: using algorithm neonx8 gen() 7929 MB/s
[    1.444386] raid6: .... xor() 5984 MB/s, rmw enabled
[    1.449367] raid6: using neon recovery algorithm
[    1.454132] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[    1.461577] iommu: Default domain type: Translated
[    1.466564] iommu: DMA domain TLB invalidation policy: strict mode
[    1.472861] SCSI subsystem initialized
[    1.476656] usbcore: registered new interface driver usbfs
[    1.482168] usbcore: registered new interface driver hub
[    1.487505] usbcore: registered new device driver usb
[    1.492656] pps_core: LinuxPPS API ver. 1 registered
[    1.497638] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.506812] PTP clock support registered
[    1.511005] vgaarb: loaded
[    1.513810] clocksource: Switched to clocksource arch_sys_counter
[    1.520030] VFS: Disk quotas dquot_6.6.0
[    1.524585] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.531531] FS-Cache: Loaded
[    1.534453] CacheFiles: Loaded
[    1.539146] NET: Registered PF_INET protocol family
[    1.544196] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.554155] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    1.562776] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.570558] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.578788] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.587832] TCP: Hash tables configured (established 65536 bind 65536)
[    1.594533] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    1.602168] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    1.609082] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    1.616490] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.622293] RPC: Registered named UNIX socket transport module.
[    1.628244] RPC: Registered udp transport module.
[    1.632963] RPC: Registered tcp transport module.
[    1.637682] RPC: Registered tcp-with-tls transport module.
[    1.643186] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.649655] PCI: CLS 0 bytes, default 64
[    1.653657] Trying to unpack rootfs image as initramfs...
[    1.659208] kvm [1]: IPA Size Limit: 40 bits
[    1.663525] kvm [1]: vgic interrupt IRQ9
[    1.667477] kvm [1]: VHE mode initialized successfully
[    1.673029] Initialise system trusted keyrings
[    1.677549] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    1.684046] zbud: loaded
[    1.686768] NFS: Registering the id_resolver key type
[    1.691855] Key type id_resolver registered
[    1.696051] Key type id_legacy registered
[    1.700081] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.706813] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.714463] xor: measuring software checksum speed
[    1.720271]    8regs           :  9926 MB/sec
[    1.725648]    32regs          :  9835 MB/sec
[    1.730745]    arm64_neon      : 13566 MB/sec
[    1.735115] xor: using function: arm64_neon (13566 MB/sec)
[    1.740622] Key type asymmetric registered
[    1.744731] Asymmetric key parser 'x509' registered
[    1.749646] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.757130] io scheduler mq-deadline registered
[    1.761678] io scheduler kyber registered
[    1.765714] io scheduler bfq registered
[    1.769835] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 26)
[    1.778998] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 27)
[    1.786746] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 28)
[    1.794487] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 29)
[    1.802234] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 30)
[    1.811381] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 31)
[    1.820457] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes
[    1.829155] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
[    1.832636] Freeing initrd memory: 8452K
[    1.844088] Console: switching to colour frame buffer device 240x67
[    1.851900] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered!
[    1.892945] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    1.899674] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART
[    1.910311] serial serial0: tty port ttyS0 registered
[    1.915695] iproc-rng200 107d208000.rng: hwrng registered
[    1.921177] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[    1.929721] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[    1.938843] brd: module loaded
[    1.943448] loop: module loaded
[    1.946728] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.954115] Loading iSCSI transport class v2.0-870.
[    1.959939] usbcore: registered new device driver r8152-cfgselector
[    1.966251] usbcore: registered new interface driver r8152
[    1.971769] usbcore: registered new interface driver lan78xx
[    1.977460] usbcore: registered new interface driver smsc95xx
[    1.983290] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.989084] dwc_otg: FIQ enabled
[    1.989085] dwc_otg: NAK holdoff enabled
[    1.989087] dwc_otg: FIQ split-transaction FSM enabled
[    1.989089] Module dwc_common_port init
[    1.989224] usbcore: registered new interface driver uas
[    1.994572] usbcore: registered new interface driver usb-storage
[    2.000701] mousedev: PS/2 mouse device common for all mice
[    2.014308] rpi-rtc soc:rpi_rtc: registered as rtc0
[    2.020713] rpi-rtc soc:rpi_rtc: setting system clock to 2024-03-17T15:54:49 UTC (1710690889)
[    2.029625] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[    2.036192] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    2.044985] sdhci: Secure Digital Host Controller Interface driver
[    2.051213] sdhci: Copyright(c) Pierre Ossman
[    2.055613] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.061443] ledtrig-cpu: registered to indicate activity on CPUs
[    2.067503] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    2.073981] hid: raw HID events driver (C) Jiri Kosina
[    2.079152] usbcore: registered new interface driver usbhid
[    2.084747] usbhid: USB HID core driver
[    2.088815] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[    2.097155] NET: Registered PF_PACKET protocol family
[    2.102276] Key type dns_resolver registered
[    2.109759] registered taskstats version 1
[    2.113920] Loading compiled-in X.509 certificates
[    2.120566] Key type .fscrypt registered
[    2.124810] Key type fscrypt-provisioning registered
[    2.130520] Btrfs loaded, zoned=no, fsverity=yes
[    2.135986] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:
[    2.143308] brcm-pcie 1000110000.pcie:   No bus range found for /axi/pcie@110000, using [bus 00-ff]
[    2.152897] brcm-pcie 1000110000.pcie:      MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000
[    2.161490] brcm-pcie 1000110000.pcie:      MEM 0x1800000000..0x1affffffff -> 0x0400000000
[    2.170088] brcm-pcie 1000110000.pcie:   IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[    2.179841] brcm-pcie 1000110000.pcie: Forcing gen 3
[    2.185263] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00
[    2.192012] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.197798] pci_bus 0000:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb])
[    2.208651] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff])
[    2.220118] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[    2.226445] pci 0000:00:00.0: PME# supported from D0 D3hot
[    2.232792] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.345811] brcm-pcie 1000110000.pcie: link up, 8.0 GT/s PCIe x1 (!SSC)
[    2.352746] pci 0000:01:00.0: [1e49:0071] type 00 class 0x010802
[    2.359064] pci 0000:01:00.0: reg 0x10: [mem 0x1b00000000-0x1b00003fff 64bit]
[    2.366652] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[    2.393834] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.400854] pci 0000:00:00.0: BAR 8: assigned [mem 0x1b00000000-0x1b000fffff]
[    2.408305] pci 0000:01:00.0: BAR 0: assigned [mem 0x1b00000000-0x1b00003fff 64bit]
[    2.416283] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.421549] pci 0000:00:00.0:   bridge window [mem 0x1b00000000-0x1b000fffff]
[    2.429000] pci 0000:00:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
[    2.437762] pci 0000:01:00.0: Max Payload Size set to  512/ 512 (was  128), Max Read Rq  512
[    2.446558] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    2.452977] pcieport 0000:00:00.0: PME: Signaling with IRQ 38
[    2.459062] pcieport 0000:00:00.0: AER: enabled with IRQ 38
[    2.465025] nvme nvme0: pci function 0000:01:00.0
[    2.470030] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[    2.482669] hwmon hwmon1: temp1_input not attached to any thermal zone
[    2.489497] hwmon hwmon1: temp2_input not attached to any thermal zone
[    2.496321] hwmon hwmon1: temp3_input not attached to any thermal zone
[    2.504087] nvme nvme0: allocated 40 MiB host memory buffer.
[    2.515336] nvme nvme0: 4/0/0 default/read/poll queues
[    2.524880]  nvme0n1: p1 p2
[    2.528089] brcm-pcie 1000110000.pcie: clkreq control enabled
[    2.534182] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[    2.541444] brcm-pcie 1000120000.pcie:   No bus range found for /axi/pcie@120000, using [bus 00-ff]
[    2.550805] brcm-pcie 1000120000.pcie:      MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[    2.559375] brcm-pcie 1000120000.pcie:      MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[    2.567948] brcm-pcie 1000120000.pcie:   IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[    2.576516] brcm-pcie 1000120000.pcie:   IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[    2.586141] brcm-pcie 1000120000.pcie: Forcing gen 2
[    2.591413] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00
[    2.598139] pci_bus 0001:00: root bus resource [bus 00-ff]
[    2.603908] pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[    2.614743] pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[    2.626195] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400
[    2.632511] pci 0001:00:00.0: PME# supported from D0 D3hot
[    2.638892] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.753813] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[    2.760761] pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000
[    2.767071] pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
[    2.773635] pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
[    2.780194] pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
[    2.786803] pci 0001:01:00.0: supports D1
[    2.791083] pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    2.805817] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    2.812724] pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
[    2.820151] pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
[    2.827579] pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
[    2.835004] pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
[    2.842426] pci 0001:00:00.0: PCI bridge to [bus 01]
[    2.847661] pci 0001:00:00.0:   bridge window [mem 0x1f00000000-0x1f005fffff]
[    2.855082] pci 0001:00:00.0: Max Payload Size set to  256/ 512 (was  128), Max Read Rq  512
[    2.863819] pci 0001:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  512
[    2.872601] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[    2.879007] pcieport 0001:00:00.0: PME: Signaling with IRQ 44
[    2.885079] pcieport 0001:00:00.0: AER: enabled with IRQ 44
[    2.890982] rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[    2.900330] rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[    2.909854] rp1 0001:01:00.0: enabling device (0000 -> 0002)
[    2.916680] rp1 0001:01:00.0: chip_id 0x20001927
[    2.945710] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 112 (d8:3a:dd:e8:8e:21)
[    2.956781] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[    2.965576] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    2.970926] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[    2.978874] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[    2.988138] xhci-hcd xhci-hcd.0: irq 137, io mem 0x1f00200000
[    2.994212] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    2.999527] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[    3.007029] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[    3.013431] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    3.021984] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.029485] usb usb1: Product: xHCI Host Controller
[    3.034639] usb usb1: Manufacturer: Linux 6.6.21-2-rpi xhci-hcd
[    3.040832] usb usb1: SerialNumber: xhci-hcd.0
[    3.045636] hub 1-0:1.0: USB hub found
[    3.049658] hub 1-0:1.0: 2 ports detected
[    3.054029] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    3.062585] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.070089] usb usb2: Product: xHCI Host Controller
[    3.075237] usb usb2: Manufacturer: Linux 6.6.21-2-rpi xhci-hcd
[    3.081459] usb usb2: SerialNumber: xhci-hcd.0
[    3.086244] hub 2-0:1.0: USB hub found
[    3.090267] hub 2-0:1.0: 1 port detected
[    3.094671] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    3.099998] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[    3.107936] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[    3.117195] xhci-hcd xhci-hcd.1: irq 142, io mem 0x1f00300000
[    3.123271] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    3.128594] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[    3.136103] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[    3.142505] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    3.151066] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.158583] usb usb3: Product: xHCI Host Controller
[    3.163737] usb usb3: Manufacturer: Linux 6.6.21-2-rpi xhci-hcd
[    3.169937] usb usb3: SerialNumber: xhci-hcd.1
[    3.174718] hub 3-0:1.0: USB hub found
[    3.178740] hub 3-0:1.0: 2 ports detected
[    3.183171] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    3.191738] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.199269] usb usb4: Product: xHCI Host Controller
[    3.204414] usb usb4: Manufacturer: Linux 6.6.21-2-rpi xhci-hcd
[    3.210627] usb usb4: SerialNumber: xhci-hcd.1
[    3.215411] hub 4-0:1.0: USB hub found
[    3.219434] hub 4-0:1.0: 1 port detected
[    3.224055] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    3.232599] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[    3.240897] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[    3.249227] platform 1000800000.codec: Adding to iommu group 0
[    3.255363] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[    3.263849] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[    3.272321] platform 1000880000.pisp_be: Adding to iommu group 0
[    3.278634] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[    3.286758] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[    3.295083] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[    3.302337] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    3.310859] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[    3.318379] usb 1-1: new full-speed USB device number 2 using xhci-hcd
[    3.325217] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[    3.332772] platform axi:gpu: Adding to iommu group 1
[    3.338299] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[    3.345797] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[    3.353102] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[    3.361628] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[    3.369343] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
[    3.369461] of_cfs_init
[    3.369725] mmc0: CQHCI version 5.10
[    3.369913] of_cfs_init: OK
[    3.370271] mmc1: CQHCI version 5.10
[    3.370517] clk: Disabling unused clocks
[    3.406365] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[    3.449817] usb 3-2: new high-speed USB device number 2 using xhci-hcd
[    3.502581] usb 1-1: New USB device found, idVendor=3151, idProduct=3020, bcdDevice= 0.02
[    3.511193] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.518750] usb 1-1: Product: Wireless Device
[    3.523514] usb 1-1: Manufacturer: YICHIP
[    3.547726] input: YICHIP Wireless Device as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1:1.0/0003:3151:3020.0001/input/input0
[    3.560352] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[    3.574362] Freeing unused kernel memory: 5056K
[    3.579229] Run /init as init process
[    3.583165]   with arguments:
[    3.583166]     /init
[    3.583168]   with environment:
[    3.583169]     HOME=/
[    3.583170]     TERM=linux
[    3.607902] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[    3.616207] usb 3-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.55
[    3.624873] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.633284] hid-generic 0003:3151:3020.0001: input,hidraw0: USB HID v2.00 Keyboard [YICHIP Wireless Device] on usb-xhci-hcd.0-1/input0
[    3.645762] usb 3-2: Product: USB2.1 Hub
[    3.650051] usb 3-2: Manufacturer: GenesysLogic
[    3.685545] input: YICHIP Wireless Device Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1:1.1/0003:3151:3020.0002/input/input1
[    3.702953] input: YICHIP Wireless Device System Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1:1.1/0003:3151:3020.0002/input/input2
[    3.719641] input: pwr_button as /devices/platform/pwr_button/input/input5
[    3.720041] hub 3-2:1.0: USB hub found
[    3.720302] hub 3-2:1.0: 4 ports detected
[    3.781929] input: YICHIP Wireless Device Consumer Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1:1.1/0003:3151:3020.0002/input/input3
[    3.798130] hid-generic 0003:3151:3020.0002: input,hiddev96,hidraw1: USB HID v2.00 Mouse [YICHIP Wireless Device] on usb-xhci-hcd.0-1/input1
[    3.842744] EXT4-fs (nvme0n1p2): mounted filesystem 4aa56689-dcb4-4759-90e6-179beae559ac r/w with ordered data mode. Quota mode: none.
[    3.927109] NET: Registered PF_INET6 protocol family
[    3.932786] Segment Routing with IPv6
[    3.936957] In-situ OAM (IOAM) with IPv6
[    3.950549] systemd[1]: systemd 255.4-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    3.983935] systemd[1]: Detected architecture arm64.
[    3.991592] systemd[1]: Hostname set to <fruticicola>.
[    4.065843] usb 3-2.2: new low-speed USB device number 3 using xhci-hcd
[    4.073034] systemd[1]: bpf-lsm: BPF LSM hook not enabled in the kernel, BPF LSM not supported
[    4.108193] uart-pl011 107d001000.serial: no DMA platform data
[    4.186069] systemd[1]: Queued start job for default target Graphical Interface.
[    4.205352] usb 3-2.2: New USB device found, idVendor=09da, idProduct=2268, bcdDevice= 1.04
[    4.214161] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.221939] usb 3-2.2: Product: USB Keyboard
[    4.226770] usb 3-2.2: Manufacturer: SONiX
[    4.242796] systemd[1]: Created slice Slice /system/dirmngr.
[    4.249970] systemd[1]: Created slice Slice /system/getty.
[    4.256862] systemd[1]: Created slice Slice /system/gpg-agent.
[    4.263989] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    4.271774] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    4.279420] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    4.286815] systemd[1]: Created slice Slice /system/keyboxd.
[    4.293666] systemd[1]: Created slice Slice /system/modprobe.
[    4.300537] systemd[1]: Created slice Slice /system/serial-getty.
[    4.307707] systemd[1]: Created slice Slice /system/wpa_supplicant.
[    4.314933] systemd[1]: Created slice User and Session Slice.
[    4.321561] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.330354] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.338862] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.349078] systemd[1]: Expecting device /dev/nvme0n1p1...
[    4.355336] systemd[1]: Expecting device /dev/ttyAMA10...
[    4.358593] input: SONiX USB Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2.2/3-2.2:1.0/0003:09DA:2268.0003/input/input6
[    4.376570] systemd[1]: Expecting device /sys/subsystem/net/devices/wlan0...
[    4.384742] systemd[1]: Reached target Local Encrypted Volumes.
[    4.391849] systemd[1]: Reached target Local Integrity Protected Volumes.
[    4.399613] systemd[1]: Reached target Path Units.
[    4.405158] systemd[1]: Reached target Remote File Systems.
[    4.411464] systemd[1]: Reached target Slice Units.
[    4.417073] systemd[1]: Reached target Swaps.
[    4.422149] systemd[1]: Reached target Local Verity Protected Volumes.
[    4.429421] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.433916] hid-generic 0003:09DA:2268.0003: input,hidraw2: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-xhci-hcd.1-2.2/input0
[    4.450535] systemd[1]: Listening on Process Core Dump Socket.
[    4.454628] input: SONiX USB Keyboard Consumer Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2.2/3-2.2:1.1/0003:09DA:2268.0004/input/input7
[    4.474134] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.481347] systemd[1]: Listening on Journal Socket.
[    4.487398] systemd[1]: Listening on Network Service Netlink Socket.
[    4.494571] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.507212] systemd[1]: Listening on udev Control Socket.
[    4.513489] systemd[1]: Listening on udev Kernel Socket.
[    4.519723] systemd[1]: Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[    4.529860] input: SONiX USB Keyboard System Control as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2.2/3-2.2:1.1/0003:09DA:2268.0004/input/input8
[    4.549429] hid-generic 0003:09DA:2268.0004: input,hidraw3: USB HID v1.11 Device [SONiX USB Keyboard] on usb-xhci-hcd.1-2.2/input1
[    4.573922] systemd[1]: Mounting POSIX Message Queue File System...
[    4.581938] systemd[1]: Mounting Kernel Debug File System...
[    4.589192] systemd[1]: Mounting Kernel Trace File System...
[    4.596944] systemd[1]: Mounting Temporary Directory /tmp...
[    4.604793] systemd[1]: Starting Create List of Static Device Nodes...
[    4.613505] systemd[1]: Starting Load Kernel Module configfs...
[    4.621771] systemd[1]: Starting Load Kernel Module dm_mod...
[    4.629891] systemd[1]: Starting Load Kernel Module drm...
[    4.637979] systemd[1]: Starting Load Kernel Module fuse...
[    4.645393] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    4.646448] systemd[1]: Starting Load Kernel Module loop...
[    4.661565] fuse: init (API version 7.39)
[    4.661573] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    4.669818] usb 3-2.4: new full-speed USB device number 4 using xhci-hcd
[    4.686779] systemd[1]: Starting Journal Service...
[    4.693544] systemd[1]: Starting Load Kernel Modules...
[    4.700520] systemd[1]: Starting Generate network units from Kernel command line...
[    4.708813] Asymmetric key parser 'pkcs8' registered
[    4.714562] systemd-journald[186]: Collecting audit messages is disabled.
[    4.721992] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.735551] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.743268] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.756127] systemd[1]: Starting Coldplug All udev Devices...
[    4.764146] systemd[1]: Started Journal Service.
[    4.770112] EXT4-fs (nvme0n1p2): re-mounted 4aa56689-dcb4-4759-90e6-179beae559ac r/w. Quota mode: none.
[    4.796583] usb 3-2.4: device descriptor read/64, error -32
[    4.818633] systemd-journald[186]: Received client request to flush runtime journal.
[    4.843011] systemd-journald[186]: /var/log/journal/1869da2f7a9a446a9cbd443cd308a282/system.journal: Journal file uses a different sequence number ID, rotating.
[    4.857963] systemd-journald[186]: Rotating system journal.
[    5.022123] usb 3-2.4: device descriptor read/64, error -32
[    5.067545] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[    5.076610] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[    5.093994] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[    5.105025] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[    5.105121] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.113694] brcmstb-i2c 107d508200.i2c:  @97500hz registered in interrupt mode
[    5.124722] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    5.128867] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[    5.129232] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    5.129964] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[    5.138085] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.138548] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[    5.146506] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    5.146660] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[    5.150384] brcmstb-i2c 107d508280.i2c:  @97500hz registered in interrupt mode
[    5.156841] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[    5.207875] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[    5.208422] mc: Linux media interface: v0.10
[    5.249869] usb 3-2.4: new full-speed USB device number 5 using xhci-hcd
[    5.260912] macb 1f00100000.ethernet end0: renamed from eth0
[    5.264033] videodev: Linux video capture interface: v2.00
[    5.305964] Bluetooth: Core ver 2.22
[    5.313187] NET: Registered PF_BLUETOOTH protocol family
[    5.320248] Bluetooth: HCI device and connection manager initialized
[    5.321321] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[    5.327062] Bluetooth: HCI socket layer initialized
[    5.342527] Bluetooth: L2CAP socket layer initialized
[    5.348246] Bluetooth: SCO socket layer initialized
[    5.348324] brcmfmac: F1 signature read @0x18000000=0x15264345
[    5.350314] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.355156] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.364283] usb 3-2.4: device descriptor read/64, error -32
[    5.364528] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[    5.387186] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[    5.388086] rpivid 1000800000.codec: Device registered as /dev/video19
[    5.394369] macb 1f00100000.ethernet end0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[    5.394374] macb 1f00100000.ethernet end0: configuring for phy/rgmii-id link mode
[    5.395639] Bluetooth: HCI UART driver ver 2.3
[    5.397514] pps pps0: new PPS source ptp0
[    5.402631] Bluetooth: HCI UART protocol H4 registered
[    5.403894] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[    5.405217] pispbe 1000880000.pisp_be: pispbe_probe: HW version:  0x02252700
[    5.405221] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000
[    5.405222] pispbe 1000880000.pisp_be: pispbe_probe: Status:      0x00000000
[    5.405224] pispbe 1000880000.pisp_be: Register nodes for group 0
[    5.414317] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    5.414334] pispbe 1000880000.pisp_be: input device node registered as /dev/video20
[    5.414762] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21
[    5.415151] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[    5.416173] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22
[    5.423377] Bluetooth: HCI UART protocol Broadcom registered
[    5.423626] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
[    5.423848] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23
[    5.423899] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24
[    5.423928] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25
[    5.423960] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26
[    5.424010] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[    5.566399] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27
[    5.566925] pispbe 1000880000.pisp_be: config device node registered as /dev/video28
[    5.584429] pispbe 1000880000.pisp_be: Register nodes for group 1
[    5.591022] pispbe 1000880000.pisp_be: input device node registered as /dev/video29
[    5.591071] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30
[    5.591106] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31
[    5.591149] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32
[    5.591308] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33
[    5.632898] usb 3-2.4: device descriptor read/64, error -32
[    5.638843] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34
[    5.647069] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35
[    5.647152] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36
[    5.647193] pispbe 1000880000.pisp_be: config device node registered as /dev/video37
[    5.711914] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[    5.719586] Console: switching to colour dummy device 80x25
[    5.727299] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[    5.736046] Registered IR keymap rc-cec
[    5.739979] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0
[    5.747299] usb 3-2-port4: attempt power cycle
[    5.751884] usbcore: registered new interface driver brcmfmac
[    5.757788] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input9
[    5.766399] brcmfmac_wcc: brcmf_wcc_attach: executing
[    5.766550] Bluetooth: hci0: BCM: chip id 107
[    5.766997] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/107c701400.hdmi/sound/card0/input10
[    5.771242] Bluetooth: hci0: BCM: features 0x2f
[    5.784800] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[    5.785897] Bluetooth: hci0: BCM4345C0
[    5.795646] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[    5.795873] Registered IR keymap rc-cec
[    5.802520] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch
[    5.805489] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1
[    5.811966] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[    5.818860] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input11
[    5.826677] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov  1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[    5.847258] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/107c706400.hdmi/sound/card1/input12
[    5.856583] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[    5.863732] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[    5.870640] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[    5.877862] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[    5.885494] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[    6.042050] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
[    6.121378] Console: switching to colour frame buffer device 100x30
[    6.144613] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device
[    6.184251] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[    6.413818] usb 3-2.4: new full-speed USB device number 6 using xhci-hcd
[    6.420828] usb 3-2.4: Device not responding to setup address.
[    6.566433] Bluetooth: hci0: BCM: features 0x2f
[    6.572470] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[    6.578851] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[    6.585284] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[    6.633912] usb 3-2.4: Device not responding to setup address.
[    6.711145] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[    6.845817] usb 3-2.4: device not accepting address 6, error -71
[    6.953817] usb 3-2.4: new full-speed USB device number 7 using xhci-hcd
[    6.960707] usb 3-2.4: Device not responding to setup address.
[    7.173904] usb 3-2.4: Device not responding to setup address.
[    7.385814] usb 3-2.4: device not accepting address 7, error -71
[    7.392029] usb 3-2-port4: unable to enumerate USB device
[   10.487873] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   10.497847] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[  313.413817] nvme nvme0: controller is down; will reset: CSTS=0xffffffff, PCI_STATUS=0x10
[  313.422179] nvme nvme0: Does your device have a faulty power saving mode enabled?
[  313.429908] nvme nvme0: Try "nvme_core.default_ps_max_latency_us=0 pcie_aspm=off" and report a bug
[  313.469937] nvme0n1: I/O Cmd(0x2) @ LBA 1310068272, 32 blocks, I/O Error (sct 0x3 / sc 0x71) 
[  313.478730] I/O error, dev nvme0n1, sector 1310068272 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
[  313.517822] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[  313.531362] nvme nvme0: 4/0/0 default/read/poll queues
[  317.114694] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  317.226666] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  317.334667] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  317.442657] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  317.550661] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  317.558222] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  317.565779] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  317.573332] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[  325.370671] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  325.482671] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  325.590674] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  325.698676] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  325.806683] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  325.814206] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  325.821727] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  325.829251] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[  330.875173] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[  333.158686] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  333.270684] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  333.378682] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  333.486704] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  333.594705] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  333.602206] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  333.609798] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  333.617281] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[  336.566699] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  336.678693] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  336.786693] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  336.894695] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  337.002692] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  337.010125] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  337.017625] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  337.025085] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[  339.970692] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  340.082682] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  340.190680] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  340.298675] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  340.406673] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  340.414097] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  340.421521] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  340.428947] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[  344.606667] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  344.718686] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  344.826683] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  344.934685] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  345.042676] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  345.050095] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  345.057504] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  345.064914] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[  351.606675] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  351.718665] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  351.826662] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  351.934660] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  352.042662] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  352.050073] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  352.057481] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  352.064889] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[  361.622677] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  361.734669] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  361.842672] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  361.950676] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  362.058669] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  362.066081] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  362.073491] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  362.080901] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52
[  375.634678] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52
[  375.746670] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52
[  375.854675] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52
[  375.962678] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52
[  376.070674] brcmfmac: brcmf_set_channel: set chanspec 0xd034 fail, reason -52
[  376.078125] brcmfmac: brcmf_set_channel: set chanspec 0xd038 fail, reason -52
[  376.085578] brcmfmac: brcmf_set_channel: set chanspec 0xd03c fail, reason -52
[  376.093031] brcmfmac: brcmf_set_channel: set chanspec 0xd040 fail, reason -52

systemd

Mar 17 16:23:38 fruticicola kernel: Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
Mar 17 16:23:38 fruticicola kernel: Linux version 6.6.21-2-rpi (builduser@leming) (aarch64-unknown-linux-gnu-gcc (GCC) 12.1.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Wed Mar 13 14:11:28 MDT 2024
Mar 17 16:23:38 fruticicola kernel: KASLR enabled
Mar 17 16:23:38 fruticicola kernel: random: crng init done
Mar 17 16:23:38 fruticicola kernel: Machine model: Raspberry Pi 5 Model B Rev 1.0
Mar 17 16:23:38 fruticicola kernel: efi: UEFI not found.
Mar 17 16:23:38 fruticicola kernel: Reserved memory: created CMA memory pool at 0x0000000002000000, size 320 MiB
Mar 17 16:23:38 fruticicola kernel: OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Mar 17 16:23:38 fruticicola kernel: OF: reserved mem: 0x0000000002000000..0x0000000015ffffff (327680 KiB) map reusable linux,cma
Mar 17 16:23:38 fruticicola kernel: OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
Mar 17 16:23:38 fruticicola kernel: OF: reserved mem: 0x000000003fd165a0..0x000000003fd165e4 (0 KiB) nomap non-reusable nvram@0
Mar 17 16:23:38 fruticicola kernel: Zone ranges:
Mar 17 16:23:38 fruticicola kernel:   DMA      [mem 0x0000000000000000-0x00000000ffffffff]
Mar 17 16:23:38 fruticicola kernel:   DMA32    empty
Mar 17 16:23:38 fruticicola kernel:   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
Mar 17 16:23:38 fruticicola kernel: Movable zone start for each node
Mar 17 16:23:38 fruticicola kernel: Early memory node ranges
Mar 17 16:23:38 fruticicola kernel:   node   0: [mem 0x0000000000000000-0x000000000007ffff]
Mar 17 16:23:38 fruticicola kernel:   node   0: [mem 0x0000000000080000-0x000000003f7fffff]
Mar 17 16:23:38 fruticicola kernel:   node   0: [mem 0x0000000040000000-0x00000001ffffffff]
Mar 17 16:23:38 fruticicola kernel: Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
Mar 17 16:23:38 fruticicola kernel: On node 0, zone DMA: 2048 pages in unavailable ranges
Mar 17 16:23:38 fruticicola kernel: psci: probing for conduit method from DT.
Mar 17 16:23:38 fruticicola kernel: psci: PSCIv1.1 detected in firmware.
Mar 17 16:23:38 fruticicola kernel: psci: Using standard PSCI v0.2 function IDs
Mar 17 16:23:38 fruticicola kernel: psci: MIGRATE_INFO_TYPE not supported.
Mar 17 16:23:38 fruticicola kernel: psci: SMC Calling Convention v1.2
Mar 17 16:23:38 fruticicola kernel: percpu: Embedded 30 pages/cpu s85416 r8192 d29272 u122880
Mar 17 16:23:38 fruticicola kernel: pcpu-alloc: s85416 r8192 d29272 u122880 alloc=30*4096
Mar 17 16:23:38 fruticicola kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
Mar 17 16:23:38 fruticicola kernel: Detected PIPT I-cache on CPU0
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: Virtualization Host Extensions
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: Hardware dirty bit management
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: Spectre-v4
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: Spectre-BHB
Mar 17 16:23:38 fruticicola kernel: CPU features: kernel page table isolation forced ON by KASLR
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: Kernel page table isolation (KPTI)
Mar 17 16:23:38 fruticicola kernel: alternatives: applying boot alternatives
Mar 17 16:23:38 fruticicola kernel: Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=D8:3A:DD:E8:8E:21 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  root=/dev/nvme0n1p2 rw rootwait console=ttyAMA10,115200 console=tty1 fsck.repair=yes
Mar 17 16:23:38 fruticicola kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Mar 17 16:23:38 fruticicola kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Mar 17 16:23:38 fruticicola kernel: Built 1 zonelists, mobility grouping on.  Total pages: 2062336
Mar 17 16:23:38 fruticicola kernel: mem auto-init: stack:all(zero), heap alloc:off, heap free:off
Mar 17 16:23:38 fruticicola kernel: software IO TLB: area num 4.
Mar 17 16:23:38 fruticicola kernel: software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
Mar 17 16:23:38 fruticicola kernel: Memory: 7789120K/8380416K available (14528K kernel code, 2300K rwdata, 4528K rodata, 5056K init, 1049K bss, 263616K reserved, 327680K cma-reserved)
Mar 17 16:23:38 fruticicola kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Mar 17 16:23:38 fruticicola kernel: ftrace: allocating 45526 entries in 178 pages
Mar 17 16:23:38 fruticicola kernel: ftrace: allocated 178 pages with 4 groups
Mar 17 16:23:38 fruticicola kernel: trace event string verifier disabled
Mar 17 16:23:38 fruticicola kernel: rcu: Preemptible hierarchical RCU implementation.
Mar 17 16:23:38 fruticicola kernel: rcu:         RCU event tracing is enabled.
Mar 17 16:23:38 fruticicola kernel:         Trampoline variant of Tasks RCU enabled.
Mar 17 16:23:38 fruticicola kernel:         Rude variant of Tasks RCU enabled.
Mar 17 16:23:38 fruticicola kernel:         Tracing variant of Tasks RCU enabled.
Mar 17 16:23:38 fruticicola kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Mar 17 16:23:38 fruticicola kernel: NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Mar 17 16:23:38 fruticicola kernel: Root IRQ handler: gic_handle_irq
Mar 17 16:23:38 fruticicola kernel: GIC: Using split EOI/Deactivate mode
Mar 17 16:23:38 fruticicola kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
Mar 17 16:23:38 fruticicola kernel: arch_timer: cp15 timer(s) running at 54.00MHz (phys).
Mar 17 16:23:38 fruticicola kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
Mar 17 16:23:38 fruticicola kernel: sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Mar 17 16:23:38 fruticicola kernel: Console: colour dummy device 80x25
Mar 17 16:23:38 fruticicola kernel: printk: console [tty1] enabled
Mar 17 16:23:38 fruticicola kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
Mar 17 16:23:38 fruticicola kernel: pid_max: default: 32768 minimum: 301
Mar 17 16:23:38 fruticicola kernel: LSM: initializing lsm=capability,integrity
Mar 17 16:23:38 fruticicola kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mar 17 16:23:38 fruticicola kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mar 17 16:23:38 fruticicola kernel: cgroup: Disabling memory control group subsystem
Mar 17 16:23:38 fruticicola kernel: RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
Mar 17 16:23:38 fruticicola kernel: RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
Mar 17 16:23:38 fruticicola kernel: RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
Mar 17 16:23:38 fruticicola kernel: rcu: Hierarchical SRCU implementation.
Mar 17 16:23:38 fruticicola kernel: rcu:         Max phase no-delay instances is 1000.
Mar 17 16:23:38 fruticicola kernel: EFI services will not be available.
Mar 17 16:23:38 fruticicola kernel: smp: Bringing up secondary CPUs ...
Mar 17 16:23:38 fruticicola kernel: Detected PIPT I-cache on CPU1
Mar 17 16:23:38 fruticicola kernel: CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
Mar 17 16:23:38 fruticicola kernel: Detected PIPT I-cache on CPU2
Mar 17 16:23:38 fruticicola kernel: CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
Mar 17 16:23:38 fruticicola kernel: Detected PIPT I-cache on CPU3
Mar 17 16:23:38 fruticicola kernel: CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
Mar 17 16:23:38 fruticicola kernel: smp: Brought up 1 node, 4 CPUs
Mar 17 16:23:38 fruticicola kernel: SMP: Total of 4 processors activated.
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: 32-bit EL0 Support
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: Data cache clean to the PoU not required for I/D coherence
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: Common not Private translations
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: CRC32 instructions
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: RCpc load-acquire (LDAPR)
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: LSE atomic instructions
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: Privileged Access Never
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: RAS Extension Support
Mar 17 16:23:38 fruticicola kernel: CPU features: detected: Speculative Store Bypassing Safe (SSBS)
Mar 17 16:23:38 fruticicola kernel: CPU: All CPU(s) started at EL2
Mar 17 16:23:38 fruticicola kernel: alternatives: applying system-wide alternatives
Mar 17 16:23:38 fruticicola kernel: devtmpfs: initialized
Mar 17 16:23:38 fruticicola kernel: Enabled cp15_barrier support
Mar 17 16:23:38 fruticicola kernel: Enabled setend support
Mar 17 16:23:38 fruticicola kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Mar 17 16:23:38 fruticicola kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Mar 17 16:23:38 fruticicola kernel: pinctrl core: initialized pinctrl subsystem
Mar 17 16:23:38 fruticicola kernel: DMI not present or invalid.
Mar 17 16:23:38 fruticicola kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
Mar 17 16:23:38 fruticicola kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
Mar 17 16:23:38 fruticicola kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Mar 17 16:23:38 fruticicola kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Mar 17 16:23:38 fruticicola kernel: audit: initializing netlink subsys (disabled)
Mar 17 16:23:38 fruticicola kernel: audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
Mar 17 16:23:38 fruticicola kernel: thermal_sys: Registered thermal governor 'step_wise'
Mar 17 16:23:38 fruticicola kernel: cpuidle: using governor menu
Mar 17 16:23:38 fruticicola kernel: hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Mar 17 16:23:38 fruticicola kernel: ASID allocator initialised with 32768 entries
Mar 17 16:23:38 fruticicola kernel: Serial: AMBA PL011 UART driver
Mar 17 16:23:38 fruticicola kernel: bcm2835-mbox 107c013880.mailbox: mailbox enabled
Mar 17 16:23:38 fruticicola kernel: 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
Mar 17 16:23:38 fruticicola kernel: printk: console [ttyAMA10] enabled
Mar 17 16:23:38 fruticicola kernel: raspberrypi-firmware soc:firmware: Attached to firmware from 2024-02-16T15:28:41, variant start_cd
Mar 17 16:23:38 fruticicola kernel: raspberrypi-firmware soc:firmware: Firmware hash is 4c845bd300000000000000000000000000000000
Mar 17 16:23:38 fruticicola kernel: Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
Mar 17 16:23:38 fruticicola kernel: Modules: 0 pages in range for non-PLT usage
Mar 17 16:23:38 fruticicola kernel: Modules: 517376 pages in range for PLT usage
Mar 17 16:23:38 fruticicola kernel: raid6: neonx8   gen()  7930 MB/s
Mar 17 16:23:38 fruticicola kernel: raid6: neonx4   gen()  7871 MB/s
Mar 17 16:23:38 fruticicola kernel: raid6: neonx2   gen()  6645 MB/s
Mar 17 16:23:38 fruticicola kernel: raid6: neonx1   gen()  5262 MB/s
Mar 17 16:23:38 fruticicola kernel: raid6: int64x8  gen()  3514
Dominant language
C
Stars
13.2k
Forks
5.5k
Avg merge
2d 21h
Merged PRs (30d)
21

Contributor guide

No contributing guide indexed for this repository

First steps

  1. Read the whole issue, then the project's contributing guide.
  2. Comment on the issue to say you are picking it up — it saves two people doing the same work.
  3. Fork the repository and make your change on a branch.
  4. Open a pull request that references the issue number.

More from raspberrypi/linux

All issues in raspberrypi/linux

Similar issues

More C issues

Get new issues in your inbox

A short digest of beginner-friendly GitHub issues.