'/boot/overlays/ilitek251x.dtbo': No such file or directory

Reproduce the failure with sudo apt full-upgrade and inspect the raspberrypi-kernel package configuration step, especially the /boot/overlays/ilitek251x.dtbo diversion error from dpkg-divert. Done means the package configures successfully and subsequent apt installs and upgrades complete without this error.

Describe the bug

A standard sudo apt update; sudo apt upgrade failed with '/boot/overlays/ilitek251x.dtbo': No such file or directory.

Repeating the commands says "all packages are up to date" but a sudo apt full-upgrade repeats the error, as does any other sudo apt install <package> (which I found out when I installed raspinfo).

To reproduce

sudo apt full-upgrade

Expected behaviour

Error-free upgrade.

Actual behaviour

$ sudo apt full-upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] 
Setting up raspberrypi-kernel (1.20201022-1) ...
Removing 'diversion of /boot/overlays/ilitek251x.dtbo to /usr/share/rpikernelhack/overlays/ilitek251x.dtbo by rpikernelhack'
dpkg-divert: error: error checking '/boot/overlays/ilitek251x.dtbo': No such file or directory
dpkg: error processing package raspberrypi-kernel (--configure):
 installed raspberrypi-kernel package post-installation script subprocess returned error exit status 2
Errors were encountered while processing:
 raspberrypi-kernel
E: Sub-process /usr/bin/dpkg returned an error code (1)

System
Copy and paste the results of the raspinfo command in to this section.

Alternatively, copy and paste a pastebin link, or add answers to the following questions:

$ raspinfo
System Information
------------------

Raspberry Pi 4 Model B Rev 1.1
PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"

Raspberry Pi reference 2019-09-26
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 80d486687ea77d31fc3fc13cf3a2f8b464e129be, stage4

Linux sec-dev 5.4.51-v7l+ #1333 SMP Mon Aug 10 16:51:40 BST 2020 armv7l GNU/Linux
Revision        : c03111
Serial          : 1000000019137699
Model           : Raspberry Pi 4 Model B Rev 1.1
Throttled flag  : throttled=0x0
Camera          : supported=0 detected=0

Videocore information
---------------------

Sep  2 2020 21:13:13 
Copyright (c) 2012 Broadcom
version 4439d2aaa6c376a2d1ef4402f142e1cf4de37c43 (clean) (release) (start)

alloc failures:     0
compactions:        0
legacy block fails: 0

Filesystem information
----------------------
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/root      480759528 8520540 452658568   2% /
devtmpfs         1827808       0   1827808   0% /dev
tmpfs            1959904       0   1959904   0% /dev/shm
tmpfs            1959904   25148   1934756   2% /run
tmpfs               5120       4      5116   1% /run/lock
tmpfs            1959904       0   1959904   0% /sys/fs/cgroup
tmpfs             391980       0    391980   0% /run/user/1000

Filename                                Type            Size    Used    Priority
/var/swap                               file            102396  0       -2

Package version information
---------------------------
raspberrypi-ui-mods:
  Installed: 1.20200611
raspberrypi-sys-mods:
  Installed: 20200812
openbox:
  Installed: 3.6.1-8+rpt4
lxpanel:
  Installed: 0.10.0-2+rpt13
pcmanfm:
  Installed: 1.3.1-1+rpt24
rpd-plym-splash:
  Installed: 0.24

Networking Information
----------------------

docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        ether m.m.m.m  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 147126  bytes 147191393 (140.3 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 54411  bytes 8199972 (7.8 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet x.x.x.x  netmask x.x.x.x
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 26  bytes 2603 (2.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 26  bytes 2603 (2.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 34592  bytes 6223716 (5.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 80  bytes 6452 (6.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


USB Information
---------------

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M

config.txt
----------

arm_freq=1500
audio_pwm_mode=514
config_hdmi_boost=5
core_freq=500
core_freq_min=200
disable_commandline_tags=2
disable_l2cache=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
enable_gic=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=500
gpu_freq_min=250
init_uart_clock=0x2dc6c00
lcd_framerate=60
mask_gpu_interrupt0=1024
mask_gpu_interrupt1=0x10000
max_framebuffers=2
over_voltage_avs=-42500
pause_burst_frames=1
program_serial_random=1
total_mem=4096
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_force_hotplug:0=1
hdmi_group:0=2
hdmi_mode:0=82
hdmi_pixel_freq_limit:0=0x11e1a300
hdmi_pixel_freq_limit:1=0x11e1a300
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=

cmdline.txt
-----------
coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:4A:89:F9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles

raspi-gpio settings
-------------------

BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT pull=UP
GPIO 1: level=1 fsel=0 func=INPUT pull=UP
GPIO 2: level=1 fsel=0 func=INPUT pull=UP
GPIO 3: level=1 fsel=0 func=INPUT pull=UP
GPIO 4: level=1 fsel=0 func=INPUT pull=UP
GPIO 5: level=1 fsel=0 func=INPUT pull=UP
GPIO 6: level=1 fsel=0 func=INPUT pull=UP
GPIO 7: level=1 fsel=0 func=INPUT pull=UP
GPIO 8: level=1 fsel=0 func=INPUT pull=UP
GPIO 9: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 10: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 11: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 12: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 13: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 14: level=1 fsel=0 func=INPUT pull=NONE
GPIO 15: level=1 fsel=0 func=INPUT pull=UP
GPIO 16: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 17: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 18: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 19: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 20: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 21: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 22: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 24: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 25: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 26: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 27: level=0 fsel=0 func=INPUT pull=DOWN
BANK1 (GPIO 28 to 45):
GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP
GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN
GPIO 30: level=0 fsel=7 alt=3 func=CTS0 pull=UP
GPIO 31: level=0 fsel=7 alt=3 func=RTS0 pull=NONE
GPIO 32: level=1 fsel=7 alt=3 func=TXD0 pull=NONE
GPIO 33: level=1 fsel=7 alt=3 func=RXD0 pull=UP
GPIO 34: level=0 fsel=7 alt=3 func=SD1_CLK pull=NONE
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD pull=UP
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 pull=UP
GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 pull=UP
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 pull=UP
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 pull=UP
GPIO 40: level=0 fsel=4 alt=0 func=PWM1_0 pull=NONE
GPIO 41: level=0 fsel=4 alt=0 func=PWM1_1 pull=NONE
GPIO 42: level=1 fsel=1 func=OUTPUT pull=UP
GPIO 43: level=1 fsel=0 func=INPUT pull=UP
GPIO 44: level=1 fsel=0 func=INPUT pull=UP
GPIO 45: level=1 fsel=0 func=INPUT pull=UP
BANK2 (GPIO 46 to 53):
GPIO 46: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 47: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 48: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 49: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 50: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 51: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 52: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 53: level=0 fsel=0 func=INPUT pull=DOWN

vcdbg log messages
------------------

005323.567: arasan: arasan_emmc_open
005476.292: brfs: File read: /mfs/sd/config.txt
005477.061: brfs: File read: 1782 bytes
005501.274: brfs: File read: /mfs/sd/config.txt
005508.091: brfs: File read: 1782 bytes
005954.986: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
005957.443: *** Restart logging
005971.120: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
005971.136: HDMI0: hdmi_pixel_encoding: 300000000
005971.148: HDMI1: hdmi_pixel_encoding: 300000000
005976.106: dtb_file 'bcm2711-rpi-4-b.dtb'
005981.761: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb
005981.776: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xb96f
005994.097: brfs: File read: 47471 bytes
006005.441: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
006060.051: brfs: File read: 1423 bytes
006063.531: brfs: File read: /mfs/sd/config.txt
006064.021: dtparam: audio=on
006073.395: brfs: File read: 1782 bytes
006085.640: brfs: File read: /mfs/sd/overlays/vc4-fkms-v3d.dtbo
006102.275: Loaded overlay 'vc4-fkms-v3d'
006145.349: brfs: File read: 1238 bytes
006147.528: brfs: File read: /mfs/sd/cmdline.txt
006147.572: Read command line from file 'cmdline.txt':
006147.584: 'console=serial0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles'
007412.979: brfs: File read: 155 bytes
008666.046: brfs: File read: /mfs/sd/kernel7l.img
008666.090: Loading 'kernel7l.img' to 0x8000 size 0x5b7fc0
008666.144: Device tree loaded to 0x2eff4100 (size 0xbed1)
008670.247: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
011727.464: vchiq_core: vchiq_init_state: slot_zero = 0xded80000, is_master = 1
011731.103: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
011738.667: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000052
015677.754: TV service:host side not connected, dropping notification 0x00000004, 0x00000004, 0x00000000
020801.941: TV service:host side not connected, dropping notification 0x00000004, 0x00000004, 0x00000000

dmesg log
---------

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.51-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1333 SMP Mon Aug 10 16:51:40 BST 2020
[    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] On node 0 totalpages: 1012736
[    0.000000]   DMA zone: 2304 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 196608 pages, LIFO batch:63
[    0.000000]   HighMem zone: 816128 pages, LIFO batch:63
[    0.000000] percpu: Embedded 20 pages/cpu s49856 r8192 d23872 u81920
[    0.000000] pcpu-alloc: s49856 r8192 d23872 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1010432
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=/dev/sda1 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x17cc0000-0x1bcc0000] (64MB)
[    0.000000] Memory: 3655620K/4050944K available (10240K kernel code, 725K rwdata, 2740K rodata, 2048K init, 853K bss, 133180K reserved, 262144K cma-reserved, 3264512K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 30051 entries in 59 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x340/0x518 with crng_init=0
[    0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000027] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000106] bcm2835: system timer (irq = 17)
[    0.000773] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000789] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000806] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000818] Switching to timer-based delay loop, resolution 18ns
[    0.001056] Console: colour dummy device 80x30
[    0.001087] printk: console [tty1] enabled
[    0.001135] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[    0.001155] pid_max: default: 32768 minimum: 301
[    0.001479] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001501] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.002700] Disabling memory control group subsystem
[    0.002806] CPU: Testing write buffer coherency: ok
[    0.003302] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.004151] Setting up static identity map for 0x200000 - 0x20003c
[    0.004342] rcu: Hierarchical SRCU implementation.
[    0.004982] smp: Bringing up secondary CPUs ...
[    0.006187] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.007517] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.008776] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.008922] smp: Brought up 1 node, 4 CPUs
[    0.008939] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[    0.008952] CPU: All CPU(s) started in HYP mode.
[    0.008963] CPU: Virtualization extensions available.
[    0.009765] devtmpfs: initialized
[    0.023099] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[    0.023355] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.023382] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.031400] pinctrl core: initialized pinctrl subsystem
[    0.032485] NET: Registered protocol family 16
[    0.036293] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.038037] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.038051] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.038402] Serial: AMBA PL011 UART driver
[    0.041833] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.060897] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-09-02 21:13, variant start
[    0.070878] raspberrypi-firmware soc:firmware: Firmware hash is 4439d2aaa6c376a2d1ef4402f142e1cf4de37c43
[    0.123977] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.128474] vgaarb: loaded
[    0.128948] SCSI subsystem initialized
[    0.129175] usbcore: registered new interface driver usbfs
[    0.129258] usbcore: registered new interface driver hub
[    0.129377] usbcore: registered new device driver usb
[    0.131025] clocksource: Switched to clocksource arch_sys_counter
[    0.883046] VFS: Disk quotas dquot_6.6.0
[    0.883149] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.883329] FS-Cache: Loaded
[    0.883532] CacheFiles: Loaded
[    0.884420] simple-framebuffer 3e3cf000.framebuffer: framebuffer at 0x3e3cf000, 0x7f8000 bytes, mapped to 0x(ptrval)
[    0.884437] simple-framebuffer 3e3cf000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[    0.884946] Console: switching to colour frame buffer device 240x67
[    0.895715] simple-framebuffer 3e3cf000.framebuffer: fb0: simplefb registered!
[    0.905669] thermal_sys: Registered thermal governor 'step_wise'
[    0.906050] NET: Registered protocol family 2
[    0.906792] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.906822] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.906899] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.906976] TCP: Hash tables configured (established 8192 bind 8192)
[    0.907127] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.907160] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.907408] NET: Registered protocol family 1
[    0.908141] RPC: Registered named UNIX socket transport module.
[    0.908153] RPC: Registered udp transport module.
[    0.908165] RPC: Registered tcp transport module.
[    0.908177] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.908198] PCI: CLS 0 bytes, default 64
[    0.910077] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    0.912301] Initialise system trusted keyrings
[    0.912538] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    0.923301] FS-Cache: Netfs 'nfs' registered for caching
[    0.924024] NFS: Registering the id_resolver key type
[    0.924054] Key type id_resolver registered
[    0.924068] Key type id_legacy registered
[    0.924089] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.925189] Key type asymmetric registered
[    0.925203] Asymmetric key parser 'x509' registered
[    0.925368] bounce: pool size: 64 pages
[    0.925417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.925637] io scheduler mq-deadline registered
[    0.925650] io scheduler kyber registered
[    0.929487] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    0.929510] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    0.929574] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[    0.929638] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
[    0.983166] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC)
[    0.983485] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    0.983502] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.983524] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[    0.983580] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    0.983820] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.987140] PCI: bus0: Fast back to back transfers disabled
[    0.987362] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    0.987507] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.987925] pci 0000:01:00.0: PME# supported from D0 D3cold
[    0.991303] PCI: bus1: Fast back to back transfers disabled
[    0.991361] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    0.991383] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    0.991462] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.991486] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    0.991789] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[    0.992023] pcieport 0000:00:00.0: PME: Signaling with IRQ 55
[    0.992417] pcieport 0000:00:00.0: AER: enabled with IRQ 55
[    0.992736] pci 0000:01:00.0: enabling device (0140 -> 0142)
[    0.999438] iproc-rng200 fe104000.rng: hwrng registered
[    0.999752] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.000388] vc-sm: Videocore shared memory driver
[    1.000918] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    1.012894] brd: module loaded
[    1.025146] loop: module loaded
[    1.026540] Loading iSCSI transport class v2.0-870.
[    1.028522] libphy: Fixed MDIO Bus: probed
[    1.029095] bcmgenet fd580000.ethernet: failed to get enet clock
[    1.029113] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.029135] bcmgenet fd580000.ethernet: failed to get enet-wol clock
[    1.029155] bcmgenet fd580000.ethernet: failed to get enet-eee clock
[    1.029181] bcmgenet: Skipping UMAC reset
[    1.041075] libphy: bcmgenet MII bus: probed
[    1.121142] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    1.122171] usbcore: registered new interface driver r8152
[    1.122251] usbcore: registered new interface driver lan78xx
[    1.122321] usbcore: registered new interface driver smsc95xx
[    1.122742] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.122775] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    1.125050] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
[    1.126313] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.126330] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.126345] usb usb1: Product: xHCI Host Controller
[    1.126360] usb usb1: Manufacturer: Linux 5.4.51-v7l+ xhci-hcd
[    1.126374] usb usb1: SerialNumber: 0000:01:00.0
[    1.126979] hub 1-0:1.0: USB hub found
[    1.127070] hub 1-0:1.0: 1 port detected
[    1.127624] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.127650] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    1.127673] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    1.128178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    1.128194] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.128210] usb usb2: Product: xHCI Host Controller
[    1.128225] usb usb2: Manufacturer: Linux 5.4.51-v7l+ xhci-hcd
[    1.128239] usb usb2: SerialNumber: 0000:01:00.0
[    1.128794] hub 2-0:1.0: USB hub found
[    1.128885] hub 2-0:1.0: 4 ports detected
[    1.130334] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.130604] dwc_otg: FIQ enabled
[    1.130615] dwc_otg: NAK holdoff enabled
[    1.130627] dwc_otg: FIQ split-transaction FSM enabled
[    1.130642] Module dwc_common_port init
[    1.131129] usbcore: registered new interface driver uas
[    1.131232] usbcore: registered new interface driver usb-storage
[    1.131445] mousedev: PS/2 mouse device common for all mice
[    1.133500] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.135995] sdhci: Secure Digital Host Controller Interface driver
[    1.136007] sdhci: Copyright(c) Pierre Ossman
[    1.136582] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    1.137097] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.140862] ledtrig-cpu: registered to indicate activity on CPUs
[    1.141219] hidraw: raw HID events driver (C) Jiri Kosina
[    1.141404] usbcore: registered new interface driver usbhid
[    1.141415] usbhid: USB HID core driver
[    1.142470] vchiq: vchiq_init_state: slot_zero = (ptrval)
[    1.144514] [vc_sm_connected_init]: start
[    1.154587] [vc_sm_connected_init]: end - returning 0
[    1.156637] Initializing XFRM netlink socket
[    1.156675] NET: Registered protocol family 17
[    1.156784] Key type dns_resolver registered
[    1.157249] Registering SWP/SWPB emulation handler
[    1.157605] registered taskstats version 1
[    1.157624] Loading compiled-in X.509 certificates
[    1.158132] Key type ._fscrypt registered
[    1.158144] Key type .fscrypt registered
[    1.168302] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    1.168371] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2
[    1.174390] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.175317] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    1.175332] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    1.225746] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.227383] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.229070] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.232099] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.233754] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.241295] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    1.244086] of_cfs_init
[    1.244203] of_cfs_init: OK
[    1.245736] Waiting for root device /dev/sda1...
[    1.284582] random: fast init done
[    1.315173] mmc1: new high speed SDIO card at address 0001
[    1.351583] mmc0: new ultra high speed DDR50 SDHC card at address 59b4
[    1.352511] mmcblk0: mmc0:59b4 5bLGP 14.9 GiB
[    1.354601]  mmcblk0: p1 p2
[    1.491539] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.529536] usb 2-1: New USB device found, idVendor=04e8, idProduct=61f5, bcdDevice= 1.00
[    1.529553] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.529568] usb 2-1: Product: Portable SSD T5
[    1.529582] usb 2-1: Manufacturer: Samsung
[    1.529596] usb 2-1: SerialNumber: 123456825E66
[    1.551443] scsi host0: uas
[    1.552844] scsi 0:0:0:0: Direct-Access     Samsung  Portable SSD T5  0    PQ: 0 ANSI: 6
[    1.554742] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.554917] sd 0:0:0:0: [sda] Write Protect is off
[    1.554936] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    1.555259] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.555918] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
[    1.558754]  sda: sda1
[    1.561433] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.605049] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.605137] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[    1.605818] devtmpfs: mounted
[    1.614047] Freeing unused kernel memory: 2048K
[    1.621341] Run /sbin/init as init process
[    1.671094] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.809246] systemd[1]: System time before build time, advancing clock.
[    1.853788] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    1.853809] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.853826] usb 1-1: Product: USB2.0 Hub
[    1.855721] hub 1-1:1.0: USB hub found
[    1.855960] hub 1-1:1.0: 4 ports detected
[    1.870641] NET: Registered protocol family 10
[    1.878912] Segment Routing with IPv6
[    1.899292] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    1.900049] systemd[1]: Detected architecture arm.
[    1.943871] systemd[1]: Set hostname to <sec-dev>.
[    2.617408] random: systemd: uninitialized urandom read (16 bytes read)
[    2.628010] random: systemd: uninitialized urandom read (16 bytes read)
[    2.630513] systemd[1]: Created slice User and Session Slice.
[    2.630883] random: systemd: uninitialized urandom read (16 bytes read)
[    2.630960] systemd[1]: Reached target Slices.
[    2.634379] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.634792] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.637262] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.637999] systemd[1]: Listening on udev Control Socket.
[    2.654854] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[    2.793647] i2c /dev entries driver
[    3.819404] EXT4-fs (sda1): re-mounted. Opts: (null)
[    3.929916] systemd-journald[114]: Received request to flush runtime journal from PID 1
[    4.429722] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[    4.430195] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000[    4.430607] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[    4.431114] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[    4.597480] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    4.599934] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    4.599960] [vc_sm_connected_init]: start
[    4.607690] [vc_sm_connected_init]: installed successfully
[    4.610469] mc: Linux media interface: v0.10
[    4.612489] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    4.642733] bcm2835_audio bcm2835_audio: card created with 4 channels
[    4.647634] videodev: Linux video capture interface: v2.00
[    4.651073] bcm2835_audio bcm2835_audio: card created with 4 channels
[    4.713969] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    4.717628] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    4.729981] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    4.731940] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    4.783566] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    4.811418] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    4.819929] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    4.824089] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    4.837678] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    4.837708] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    4.837730] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    4.837751] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    4.837770] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    4.838586] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    4.845945] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    4.846005] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    4.860375] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    4.860425] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    4.870385] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    4.870429] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    4.898945] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[    4.898970] checking generic (3e3cf000 7f8000) vs hw (0 ffffffffffffffff)
[    4.898984] fb0: switching to vc4drmfb from simple
[    4.904153] Console: switching to colour dummy device 80x30
[    4.904374] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.904387] [drm] No driver support for vblank timestamp query.
[    4.904399] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
[    4.914312] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[    4.936573] vc4-drm gpu: HDMI-A-1: EDID is invalid:
[    4.936594]  [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    4.936607]  [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    4.936619]  [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    4.936630]  [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    4.936642]  [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    4.936654]  [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    4.936665]  [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    4.936677]  [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    5.054080] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.113734] Console: switching to colour frame buffer device 240x67
[    5.113921] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[    5.137680] vc4-drm gpu: fb0: vc4drmfb frame buffer device
[    5.165279] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.171271] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.286897] brcmfmac: F1 signature read @0x18000000=0x15264345
[    5.300939] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.302378] usbcore: registered new interface driver brcmfmac
[    5.311202] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
[    5.544006] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.558060] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea
[    6.748867] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    7.831783] uart-pl011 fe201000.serial: no DMA platform data
[    7.895771] 8021q: 802.1Q VLAN Support v1.8
[    7.925208] random: crng init done
[    7.925226] random: 7 urandom warning(s) missed due to ratelimiting
[    8.172261] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[    8.295756] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[    8.446889] bcmgenet: Skipping UMAC reset
[    8.450238] bcmgenet fd580000.ethernet: configuring instance for external RGMII
[    8.450491] bcmgenet fd580000.ethernet eth0: Link is Down
[    9.379589] broken atomic modeset userspace detected, disabling atomic
[    9.495343] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    9.497346] Bridge firewalling registered
[   11.176772] fuse: init (API version 7.31)
[   11.206601] br-f934474fb620: port 1(vethca9205d) entered blocking state
[   11.206611] br-f934474fb620: port 1(vethca9205d) entered disabled state
[   11.211888] device vethca9205d entered promiscuous mode
[   11.212424] br-f934474fb620: port 1(vethca9205d) entered blocking state
[   11.212432] br-f934474fb620: port 1(vethca9205d) entered forwarding state
[   11.212597] br-f934474fb620: port 1(vethca9205d) entered disabled state
[   11.343101] br-f934474fb620: port 2(veth3a37879) entered blocking state
[   11.343109] br-f934474fb620: port 2(veth3a37879) entered disabled state
[   11.343288] device veth3a37879 entered promiscuous mode
[   11.343502] br-f934474fb620: port 2(veth3a37879) entered blocking state
[   11.343509] br-f934474fb620: port 2(veth3a37879) entered forwarding state
[   11.343698] br-f934474fb620: port 2(veth3a37879) entered disabled state
[   11.371221] br-f934474fb620: port 1(vethca9205d) entered blocking state
[   11.371229] br-f934474fb620: port 1(vethca9205d) entered forwarding state
[   11.376638] br-f934474fb620: port 3(veth3a2acda) entered blocking state
[   11.376647] br-f934474fb620: port 3(veth3a2acda) entered disabled state
[   11.376806] device veth3a2acda entered promiscuous mode
[   11.377081] br-f934474fb620: port 3(veth3a2acda) entered blocking state
[   11.377088] br-f934474fb620: port 3(veth3a2acda) entered forwarding state
[   11.476212] br-f934474fb620: port 4(veth7ddff87) entered blocking state
[   11.476220] br-f934474fb620: port 4(veth7ddff87) entered disabled state
[   11.476414] device veth7ddff87 entered promiscuous mode
[   11.476644] br-f934474fb620: port 4(veth7ddff87) entered blocking state
[   11.476650] br-f934474fb620: port 4(veth7ddff87) entered forwarding state
[   11.588720] br-f934474fb620: port 5(veth99b5d3c) entered blocking state
[   11.588731] br-f934474fb620: port 5(veth99b5d3c) entered disabled state
[   11.596058] device veth99b5d3c entered promiscuous mode
[   11.596454] br-f934474fb620: port 5(veth99b5d3c) entered blocking state
[   11.596463] br-f934474fb620: port 5(veth99b5d3c) entered forwarding state
[   11.614145] br-f934474fb620: port 4(veth7ddff87) entered disabled state
[   11.614368] br-f934474fb620: port 5(veth99b5d3c) entered disabled state
[   11.689541] br-f934474fb620: port 2(veth3a37879) entered blocking state
[   11.689556] br-f934474fb620: port 2(veth3a37879) entered forwarding state
[   11.694762] br-f934474fb620: port 6(vetha0390f5) entered blocking state
[   11.694770] br-f934474fb620: port 6(vetha0390f5) entered disabled state
[   11.696615] device vetha0390f5 entered promiscuous mode
[   11.697986] br-f934474fb620: port 6(vetha0390f5) entered blocking state
[   11.697995] br-f934474fb620: port 6(vetha0390f5) entered forwarding state
[   11.838391] br-f934474fb620: port 7(vethbe02128) entered blocking state
[   11.838399] br-f934474fb620: port 7(vethbe02128) entered disabled state
[   11.838577] device vethbe02128 entered promiscuous mode
[   11.838840] br-f934474fb620: port 7(vethbe02128) entered blocking state
[   11.838847] br-f934474fb620: port 7(vethbe02128) entered forwarding state
[   11.963381] br-f934474fb620: port 6(vetha0390f5) entered disabled state
[   11.963593] br-f934474fb620: port 7(vethbe02128) entered disabled state
[   11.963687] br-f934474fb620: port 4(veth7ddff87) entered blocking state
[   11.963693] br-f934474fb620: port 4(veth7ddff87) entered forwarding state
[   12.063989] br-f934474fb620: port 5(veth99b5d3c) entered blocking state
[   12.063998] br-f934474fb620: port 5(veth99b5d3c) entered forwarding state
[   12.133756] br-f934474fb620: port 6(vetha0390f5) entered blocking state
[   12.133766] br-f934474fb620: port 6(vetha0390f5) entered forwarding state
[   12.328512] br-f934474fb620: port 7(vethbe02128) entered blocking state
[   12.328522] br-f934474fb620: port 7(vethbe02128) entered forwarding state
[   13.671196] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   14.596181] br-f934474fb620: port 1(vethca9205d) entered disabled state
[   14.612418] eth0: renamed from veth63df0a0
[   14.629233] Bluetooth: Core ver 2.22
[   14.629285] NET: Registered protocol family 31
[   14.629290] Bluetooth: HCI device and connection manager initialized
[   14.629305] Bluetooth: HCI socket layer initialized
[   14.629313] Bluetooth: L2CAP socket layer initialized
[   14.629330] Bluetooth: SCO socket layer initialized
[   14.634117] Bluetooth: HCI UART driver ver 2.3
[   14.634126] Bluetooth: HCI UART protocol H4 registered
[   14.634192] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   14.634349] Bluetooth: HCI UART protocol Broadcom registered
[   14.670607] br-f934474fb620: port 1(vethca9205d) entered blocking state
[   14.670643] br-f934474fb620: port 1(vethca9205d) entered forwarding state
[   14.838403] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.838413] Bluetooth: BNEP filters: protocol multicast
[   14.838429] Bluetooth: BNEP socket layer initialized
[   14.843740] br-f934474fb620: port 2(veth3a37879) entered disabled state
[   14.948846] Bluetooth: RFCOMM TTY layer initialized
[   14.948862] Bluetooth: RFCOMM socket layer initialized
[   14.948882] Bluetooth: RFCOMM ver 1.11
[   15.015357] br-f934474fb620: port 3(veth3a2acda) entered disabled state
[   15.015636] eth0: renamed from veth569bd2d
[   15.067778] br-f934474fb620: port 2(veth3a37879) entered blocking state
[   15.067804] br-f934474fb620: port 2(veth3a37879) entered forwarding state
[   15.092143] eth0: renamed from veth7655d3d
[   15.131779] br-f934474fb620: port 3(veth3a2acda) entered blocking state
[   15.131807] br-f934474fb620: port 3(veth3a2acda) entered forwarding state
[   15.422140] br-f934474fb620: port 5(veth99b5d3c) entered disabled state
[   15.423640] eth0: renamed from vethca44412
[   15.464868] br-f934474fb620: port 5(veth99b5d3c) entered blocking state
[   15.464890] br-f934474fb620: port 5(veth99b5d3c) entered forwarding state
[   16.482378] br-f934474fb620: port 4(veth7ddff87) entered disabled state
[   16.483433] eth0: renamed from veth7423e58
[   16.563329] br-f934474fb620: port 4(veth7ddff87) entered blocking state
[   16.563353] br-f934474fb620: port 4(veth7ddff87) entered forwarding state
[   17.411729] br-f934474fb620: port 7(vethbe02128) entered disabled state
[   17.412398] eth0: renamed from vethf0aaffc
[   17.465703] br-f934474fb620: port 7(vethbe02128) entered blocking state
[   17.465713] br-f934474fb620: port 7(vethbe02128) entered forwarding state
[   17.681735] br-f934474fb620: port 6(vetha0390f5) entered disabled state
[   17.686387] eth0: renamed from veth202c414
[   17.734629] br-f934474fb620: port 6(vetha0390f5) entered blocking state
[   17.734647] br-f934474fb620: port 6(vetha0390f5) entered forwarding state
[83772.459443] sdhci-iproc fe340000.emmc2: Card stuck in wrong state! card_busy_detect status: 0xe00
[83772.517783] mmc0: tried to HW reset card, got error -2
[83772.517790] mmcblk0: recovery failed!
[83772.517923] blk_update_request: I/O error, dev mmcblk0, sector 8193 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[83772.517932] Buffer I/O error on dev mmcblk0p1, logical block 1, lost async page write
[83772.520515] blk_update_request: I/O error, dev mmcblk0, sector 119983 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[83772.520525] Buffer I/O error on dev mmcblk0p1, logical block 111791, lost async page write
[83772.520551] mmc0: card 59b4 removed
[83772.523401] FAT-fs (mmcblk0p1): Directory bread(block 111791) failed
[83772.523443] FAT-fs (mmcblk0p1): Directory bread(block 111852) failed
[83772.523671] FAT-fs (mmcblk0p1): Directory bread(block 111791) failed
[83772.523708] FAT-fs (mmcblk0p1): Directory bread(block 111852) failed
[83772.579254] FAT-fs (mmcblk0p1): Directory bread(block 8098) failed
[83772.589812] Buffer I/O error on dev mmcblk0p2, logical block 0, lost sync page write
[83772.589824] EXT4-fs (mmcblk0p2): I/O error while writing superblock
[83772.644902] FAT-fs (mmcblk0p1): unable to read boot sector to mark fs as dirty
[83772.732769] mmc0: invalid bus width
[83772.732784] mmc0: error -22 whilst initialising SD card
[83772.798698] mmc0: invalid bus width
[83772.798712] mmc0: error -22 whilst initialising SD card
[83781.059402] mmc0: error -110 whilst initialising SD card
[83789.337504] mmc0: error -110 whilst initialising SD card
[83789.401251] mmc0: invalid bus width
[83789.401269] mmc0: error -22 whilst initialising SD card
[83789.464205] mmc0: invalid bus width
[83789.464224] mmc0: error -22 whilst initialising SD card
[83797.724359] mmc0: error -110 whilst initialising SD card
[83816.078507] mmc0: error -110 whilst initialising SD card
[83817.190658] mmc0: invalid bus width
[83817.190686] mmc0: error -22 whilst initialising SD card
[83817.254724] mmc0: invalid bus width
[83817.254748] mmc0: error -22 whilst initialising SD card
[83825.516340] mmc0: error -110 whilst initialising SD card
[83854.478541] mmc0: error -110 whilst initialising SD card
[83855.588873] mmc0: invalid bus width
[83855.588886] mmc0: error -22 whilst initialising SD card
[83855.651814] mmc0: invalid bus width
[83855.651827] mmc0: error -22 whilst initialising SD card
[83863.908349] mmc0: error -110 whilst initialising SD card
[83865.513528] br-f934474fb620: port 1(vethca9205d) entered disabled state
[83865.513763] veth63df0a0: renamed from eth0
[83865.654273] br-f934474fb620: port 3(veth3a2acda) entered disabled state
[83865.655542] br-f934474fb620: port 1(vethca9205d) entered disabled state
[83865.673364] device vethca9205d left promiscuous mode
[83865.673376] br-f934474fb620: port 1(vethca9205d) entered disabled state
[83865.674087] veth7655d3d: renamed from eth0
[83865.891720] br-f934474fb620: port 3(veth3a2acda) entered disabled state
[83865.913296] device veth3a2acda left promiscuous mode
[83865.913308] br-f934474fb620: port 3(veth3a2acda) entered disabled state
[83866.058471] br-f934474fb620: port 5(veth99b5d3c) entered disabled state
[83866.060050] vethca44412: renamed from eth0
[83866.225271] br-f934474fb620: port 7(vethbe02128) entered disabled state
[83866.225502] vethf0aaffc: renamed from eth0
[83866.356268] br-f934474fb620: port 5(veth99b5d3c) entered disabled state
[83866.375244] device veth99b5d3c left promiscuous mode
[83866.375256] br-f934474fb620: port 5(veth99b5d3c) entered disabled state
[83866.378790] br-f934474fb620: port 2(veth3a37879) entered disabled state
[83866.380829] veth569bd2d: renamed from eth0
[83866.600592] br-f934474fb620: port 4(veth7ddff87) entered disabled state
[83866.600723] veth7423e58: renamed from eth0
[83866.698140] br-f934474fb620: port 7(vethbe02128) entered disabled state
[83866.717150] device vethbe02128 left promiscuous mode
[83866.717162] br-f934474fb620: port 7(vethbe02128) entered disabled state
[83866.805145] br-f934474fb620: port 2(veth3a37879) entered disabled state
[83866.824578] device veth3a37879 left promiscuous mode
[83866.824589] br-f934474fb620: port 2(veth3a37879) entered disabled state
[83866.901673] br-f934474fb620: port 4(veth7ddff87) entered disabled state
[83866.928733] device veth7ddff87 left promiscuous mode
[83866.928744] br-f934474fb620: port 4(veth7ddff87) entered disabled state
[83869.266834] br-f934474fb620: port 6(vetha0390f5) entered disabled state
[83869.267010] veth202c414: renamed from eth0
[83869.409814] br-f934474fb620: port 6(vetha0390f5) entered disabled state
[83869.429474] device vetha0390f5 left promiscuous mode
[83869.429485] br-f934474fb620: port 6(vetha0390f5) entered disabled state
[83872.183547] mmc0: error -110 whilst initialising SD card
[83873.270188] mmc0: invalid bus width
[83873.270214] mmc0: error -22 whilst initialising SD card
[83873.335764] mmc0: invalid bus width
[83873.335787] mmc0: error -22 whilst initialising SD card
[83881.598401] mmc0: error -110 whilst initialising SD card
[83889.876534] mmc0: error -110 whilst initialising SD card
[83890.952243] mmc0: invalid bus width
[83890.952269] mmc0: error -22 whilst initialising SD card
[83891.015996] mmc0: invalid bus width
[83891.016018] mmc0: error -22 whilst initialising SD card
[83899.278360] mmc0: error -110 whilst initialising SD card
[83907.554521] mmc0: error -110 whilst initialising SD card
[83908.632187] mmc0: invalid bus width
[83908.632218] mmc0: error -22 whilst initialising SD card
[83908.703507] mmc0: invalid bus width
[83908.703530] mmc0: error -22 whilst initialising SD card
[83916.965403] mmc0: error -110 whilst initialising SD card
[83925.242563] mmc0: error -110 whilst initialising SD card
[83926.312891] mmc0: invalid bus width
[83926.312918] mmc0: erropi@sec-dev:~$ r -22 whilst initialising SD card
[83926.376610] mmc0: invalid bus width
[83926.376633] mmc0: error -22 whilst initialising SD card
[83934.638430] mmc0: error -110 whilst initialising SD card
[83942.916535] mmc0: error -110 whilst initialising SD card
[83943.993034] mmc0: invalid bus width
[83943.993061] mmc0: error -22 whilst initialising SD card
[83944.056820] mmc0: invalid bus width
[83944.056843] mmc0: error -22 whilst initialising SD card
[83952.321392] mmc0: error -110 whilst initialising SD card
[83960.595519] mmc0: error -110 whilst initialising SD card
[83961.673174] mmc0: invalid bus width
[83961.673201] mmc0: error -22 whilst initialising SD card
[83961.737015] mmc0: invalid bus width
[83961.737039] mmc0: error -22 whilst initialising SD card
[83969.999423] mmc0: error -110 whilst initialising SD card
[83978.275537] mmc0: error -110 whilst initialising SD card
[83979.353607] mmc0: invalid bus width
[83979.353635] mmc0: error -22 whilst initialising SD card
[83979.417498] mmc0: invalid bus width
[83979.417521] mmc0: error -22 whilst initialising SD card
[83987.679409] mmc0: error -110 whilst initialising SD card
[83995.957569] mmc0: error -110 whilst initialising SD card
[83997.033890] mmc0: invalid bus width
[83997.033917] mmc0: error -22 whilst initialising SD card
[83997.097677] mmc0: invalid bus width
[83997.097699] mmc0: error -22 whilst initialising SD card
[84005.360392] mmc0: error -110 whilst initialising SD card
[84013.637518] mmc0: error -110 whilst initialising SD card
[84014.716311] mmc0: invalid bus width
[84014.716337] mmc0: error -22 whilst initialising SD card
[84014.782270] mmc0: invalid bus width
[84014.782294] mmc0: error -22 whilst initialising SD card
[84023.044375] mmc0: error -110 whilst initialising SD card
[84031.322476] mmc0: error -110 whilst initialising SD card
[84032.394499] mmc0: invalid bus width
[84032.394526] mmc0: error -22 whilst initialising SD card
[84032.458204] mmc0: invalid bus width
[84032.458226] mmc0: error -22 whilst initialising SD card
[84040.720396] mmc0: error -110 whilst initialising SD card
[84048.996556] mmc0: error -110 whilst initialising SD card
[84050.074786] mmc0: invalid bus width
[84050.074813] mmc0: error -22 whilst initialising SD card
[84050.138544] mmc0: invalid bus width
[84050.138570] mmc0: error -22 whilst initialising SD card
[84058.400366] mmc0: error -110 whilst initialising SD card
[84066.677525] mmc0: error -110 whilst initialising SD card
[84067.755079] mmc0: invalid bus width
[84067.755106] mmc0: error -22 whilst initialising SD card
[84067.818788] mmc0: invalid bus width
[84067.818812] mmc0: error -22 whilst initialising SD card
[84076.081381] mmc0: error -110 whilst initialising SD card
[84084.357538] mmc0: error -110 whilst initialising SD card
[84085.435438] mmc0: invalid bus width
[84085.435466] mmc0: error -22 whilst initialising SD card
[84085.499167] mmc0: invalid bus width
[84085.499190] mmc0: error -22 whilst initialising SD card
[84093.761416] mmc0: error -110 whilst initialising SD card
[84102.038523] mmc0: error -110 whilst initialising SD card
[84103.115717] mmc0: invalid bus width
[84103.115744] mmc0: error -22 whilst initialising SD card
[84103.179549] mmc0: invalid bus width
[84103.179574] mmc0: error -22 whilst initialising SD card
[84111.441385] mmc0: error -110 whilst initialising SD card
[84119.719519] mmc0: error -110 whilst initialising SD card
[84120.792419] mmc0: invalid bus width
[84120.792445] mmc0: error -22 whilst initialising SD card
[84120.855484] mmc0: invalid bus width
[84120.855510] mmc0: error -22 whilst initialising SD card
[84129.116386] mmc0: error -110 whilst initialising SD card
[84137.393519] mmc0: error -110 whilst initialising SD card
[84138.476361] mmc0: invalid bus width
[84138.476388] mmc0: error -22 whilst initialising SD card
[84138.540090] mmc0: invalid bus width
[84138.540114] mmc0: error -22 whilst initialising SD card
[84146.802387] mmc0: error -110 whilst initialising SD card
[84155.080539] mmc0: error -110 whilst initialising SD card
[84156.156835] mmc0: invalid bus width
[84156.156861] mmc0: error -22 whilst initialising SD card
[84156.220173] mmc0: invalid bus width
[84156.220192] mmc0: error -22 whilst initialising SD card
[84164.482368] mmc0: error -110 whilst initialising SD card
[84172.762519] mmc0: error -110 whilst initialising SD card
[84173.836883] mmc0: invalid bus width
[84173.836909] mmc0: error -22 whilst initialising SD card
[84173.900656] mmc0: invalid bus width
[84173.900679] mmc0: error -22 whilst initialising SD card
[84182.162408] mmc0: error -110 whilst initialising SD card
[84190.440527] mmc0: error -110 whilst initialising SD card
[84191.517162] mmc0: invalid bus width
[84191.517189] mmc0: error -22 whilst initialising SD card
[84191.580961] mmc0: invalid bus width
[84191.580985] mmc0: error -22 whilst initialising SD card
[84199.843359] mmc0: error -110 whilst initialising SD card
[84208.121551] mmc0: error -110 whilst initialising SD card
[84209.197256] mmc0: invalid bus width
[84209.197278] mmc0: error -22 whilst initialising SD card
[84209.261043] mmc0: invalid bus width
[84209.261061] mmc0: error -22 whilst initialising SD card
[84217.523365] mmc0: error -110 whilst initialising SD card
[84225.803516] mmc0: error -110 whilst initialising SD card
[84226.877796] mmc0: invalid bus width
[84226.877822] mmc0: error -22 whilst initialising SD card
[84226.941586] mmc0: invalid bus width
[84226.941608] mmc0: error -22 whilst initialising SD card
[84235.203368] mmc0: error -110 whilst initialising SD card
[84243.483527] mmc0: error -110 whilst initialising SD card
[84244.556352] mmc0: invalid bus width
[84244.556378] mmc0: error -22 whilst initialising SD card
[84244.621781] mmc0: invalid bus width
[84244.621805] mmc0: error -22 whilst initialising SD card
[84252.884382] mmc0: error -110 whilst initialising SD card
[84261.162514] mmc0: error -110 whilst initialising SD card
[84262.246697] mmc0: invalid bus width
[84262.246719] mmc0: error -22 whilst initialising SD card
[84262.311825] mmc0: invalid bus width
[84262.311845] mmc0: error -22 whilst initialising SD card
[84270.573380] mmc0: error -110 whilst initialising SD card
[84278.851543] mmc0: error -110 whilst initialising SD card
[84279.918655] mmc0: invalid bus width
[84279.918681] mmc0: error -22 whilst initialising SD card
[84279.982471] mmc0: invalid bus width
[84279.982494] mmc0: error -22 whilst initialising SD card
[84288.244382] mmc0: error -110 whilst initialising SD card
[84296.522509] mmc0: error -110 whilst initialising SD card
[84297.598939] mmc0: invalid bus width
[84297.598966] mmc0: error -22 whilst initialising SD card
[84297.662758] mmc0: invalid bus width
[84297.662780] mmc0: error -22 whilst initialising SD card
[84305.925373] mmc0: error -110 whilst initialising SD card
[84314.203486] mmc0: error -110 whilst initialising SD card
[84315.279025] mmc0: invalid bus width
[84315.279046] mmc0: error -22 whilst initialising SD card
[84315.342919] mmc0: invalid bus width
[84315.342943] mmc0: error -22 whilst initialising SD card
[84323.605377] mmc0: error -110 whilst initialising SD card
[84331.883438] mmc0: error -110 whilst initialising SD card
[84332.959493] mmc0: invalid bus width
[84332.959520] mmc0: error -22 whilst initialising SD card
[84333.023338] mmc0: invalid bus width
[84333.023361] mmc0: error -22 whilst initialising SD card
[84341.285397] mmc0: error -110 whilst initialising SD card
[84349.561516] mmc0: error -110 whilst initialising SD card
[84350.639611] mmc0: invalid bus width
[84350.639634] mmc0: error -22 whilst initialising SD card
[84350.703466] mmc0: invalid bus width
[84350.703490] mmc0: error -22 whilst initialising SD card
[84358.965386] mmc0: error -110 whilst initialising SD card
[84367.242491] mmc0: error -110 whilst initialising SD card
[84368.319854] mmc0: invalid bus width
[84368.319881] mmc0: error -22 whilst initialising SD card
[84368.383951] mmc0: invalid bus width
[84368.383974] mmc0: error -22 whilst initialising SD card
[84376.646370] mmc0: error -110 whilst initialising SD card
[84384.924504] mmc0: error -110 whilst initialising SD card
[84386.000415] mmc0: invalid bus width
[84386.000442] mmc0: error -22 whilst initialising SD card
[84386.064202] mmc0: invalid bus width
[84386.064226] mmc0: error -22 whilst initialising SD card
[84394.326369] mmc0: error -110 whilst initialising SD card
[84402.604504] mmc0: error -110 whilst initialising SD card
[84403.680678] mmc0: invalid bus width
[84403.680705] mmc0: error -22 whilst initialising SD card
[84403.744495] mmc0: invalid bus width
[84403.744519] mmc0: error -22 whilst initialising SD card
[84412.006364] mmc0: error -110 whilst initialising SD card
[84420.282483] mmc0: error -110 whilst initialising SD card
[84421.360851] mmc0: invalid bus width
[84421.360878] mmc0: error -22 whilst initialising SD card
[84421.424941] mmc0: invalid bus width
[84421.424964] mmc0: error -22 whilst initialising SD card
[84429.687346] mmc0: error -110 whilst initialising SD card
[84437.966488] mmc0: error -110 whilst initialising SD card
[84439.041255] mmc0: invalid bus width
[84439.041282] mmc0: error -22 whilst initialising SD card
[84439.105001] mmc0: invalid bus width
[84439.105025] mmc0: error -22 whilst initialising SD card
[84447.372361] mmc0: error -110 whilst initialising SD card
[84455.650491] mmc0: error -110 whilst initialising SD card
[84456.721577] mmc0: invalid bus width
[84456.721604] mmc0: error -22 whilst initialising SD card
[84456.785353] mmc0: invalid bus width
[84456.785376] mmc0: error -22 whilst initialising SD card
[84465.046359] mmc0: error -110 whilst initialising SD card
[84473.324481] mmc0: error -110 whilst initialising SD card
[84474.401831] mmc0: invalid bus width
[84474.401858] mmc0: error -22 whilst initialising SD card
[84474.465621] mmc0: invalid bus width
[84474.465644] mmc0: error -22 whilst initialising SD card
[84482.727368] mmc0: error -110 whilst initialising SD card
[84491.005525] mmc0: error -110 whilst initialising SD card
[84492.082258] mmc0: invalid bus width
[84492.082286] mmc0: error -22 whilst initialising SD card
[84492.145922] mmc0: invalid bus width
[84492.145945] mmc0: error -22 whilst initialising SD card
[84500.408358] mmc0: error -110 whilst initialising SD card
[84508.686491] mmc0: error -110 whilst initialising SD card
[84509.762413] mmc0: invalid bus width
[84509.762441] mmc0: error -22 whilst initialising SD card
[84509.826459] mmc0: invalid bus width
[84509.826486] mmc0: error -22 whilst initialising SD card
[84518.088337] mmc0: error -110 whilst initialising SD card
[84526.364541] mmc0: error -110 whilst initialising SD card
[84527.442750] mmc0: invalid bus width
[84527.442777] mmc0: error -22 whilst initialising SD card
[84527.506517] mmc0: invalid bus width
[84527.506540] mmc0: error -22 whilst initialising SD card
[84535.768353] mmc0: error -110 whilst initialising SD card
[84544.046526] mmc0: error -110 whilst initialising SD card
[84545.123009] mmc0: invalid bus width
[84545.123036] mmc0: error -22 whilst initialising SD card
[84545.186786] mmc0: invalid bus width
[84545.186809] mmc0: error -22 whilst initialising SD card
[84553.449352] mmc0: error -110 whilst initialising SD card
[84561.727520] mmc0: error -110 whilst initialising SD card
[84562.803277] mmc0: invalid bus width
[84562.803304] mmc0: error -22 whilst initialising SD card
[84562.867065] mmc0: invalid bus width
[84562.867090] mmc0: error -22 whilst initialising SD card
[84571.129322] mmc0: error -110 whilst initialising SD card
[84579.407497] mmc0: error -110 whilst initialising SD card
[84580.483336] mmc0: invalid bus width
[84580.483358] mmc0: error -22 whilst initialising SD card
[84580.547223] mmc0: invalid bus width
[84580.547247] mmc0: error -22 whilst initialising SD card
[84588.809361] mmc0: error -110 whilst initialising SD card
[84597.087491] mmc0: error -110 whilst initialising SD card
[84598.163860] mmc0: invalid bus width
[84598.163886] mmc0: error -22 whilst initialising SD card
[84598.227653] mmc0: invalid bus width
[84598.227676] mmc0: error -22 whilst initialising SD card
[84606.489345] mmc0: error -110 whilst initialising SD card
[84614.766420] mmc0: error -110 whilst initialising SD card
[84615.842404] mmc0: invalid bus width
[84615.842432] mmc0: error -22 whilst initialising SD card
[84615.907749] mmc0: invalid bus width
[84615.907769] mmc0: error -22 whilst initialising SD card
[84624.169382] mmc0: error -110 whilst initialising SD card
[84632.447477] mmc0: error -110 whilst initialising SD card
[84633.524401] mmc0: invalid bus width
[84633.524428] mmc0: error -22 whilst initialising SD card
[84633.588115] mmc0: invalid bus width
[84633.588138] mmc0: error -22 whilst initialising SD card
[84641.851363] mmc0: error -110 whilst initialising SD card
[84650.126489] mmc0: error -110 whilst initialising SD card
[84651.204714] mmc0: invalid bus width
[84651.204741] mmc0: error -22 whilst initialising SD card
[84651.268414] mmc0: invalid bus width
[84651.268437] mmc0: error -22 whilst initialising SD card
[84659.530344] mmc0: error -110 whilst initialising SD card
[84667.807482] mmc0: error -110 whilst initialising SD card
[84668.884678] mmc0: invalid bus width
[84668.884700] mmc0: error -22 whilst initialising SD card
[84668.948509] mmc0: invalid bus width
[84668.948528] mmc0: error -22 whilst initialising SD card
[84677.210334] mmc0: error -110 whilst initialising SD card
[84685.488492] mmc0: error -110 whilst initialising SD card
[84686.565278] mmc0: invalid bus width
[84686.565305] mmc0: error -22 whilst initialising SD card
[84686.629081] mmc0: invalid bus width
[84686.629104] mmc0: error -22 whilst initialising SD card
[84694.891371] mmc0: error -110 whilst initialising SD card
[84703.167487] mmc0: error -110 whilst initialising SD card
[84704.245582] mmc0: invalid bus width
[84704.245609] mmc0: error -22 whilst initialising SD card
[84704.309352] mmc0: invalid bus width
[84704.309377] mmc0: error -22 whilst initialising SD card
[84712.571342] mmc0: error -110 whilst initialising SD card
[84720.848454] mmc0: error -110 whilst initialising SD card
[84721.925629] mmc0: invalid bus width
[84721.925651] mmc0: error -22 whilst initialising SD card
[84721.989494] mmc0: invalid bus width
[84721.989518] mmc0: error -22 whilst initialising SD card
[84730.251349] mmc0: error -110 whilst initialising SD card
[84738.528473] mmc0: error -110 whilst initialising SD card
[84739.606151] mmc0: invalid bus width
[84739.606177] mmc0: error -22 whilst initialising SD card
[84739.669330] mmc0: invalid bus width
[84739.669355] mmc0: error -22 whilst initialising SD card
[84747.931351] mmc0: error -110 whilst initialising SD card
[84756.209469] mmc0: error -110 whilst initialising SD card
[84757.286395] mmc0: invalid bus width
[84757.286422] mmc0: error -22 whilst initialising SD card
[84757.350216] mmc0: invalid bus width
[84757.350240] mmc0: error -22 whilst initialising SD card
[84765.612336] mmc0: error -110 whilst initialising SD card
[84773.888475] mmc0: error -110 whilst initialising SD card
[84774.966754] mmc0: invalid bus width
[84774.966781] mmc0: error -22 whilst initialising SD card
[84775.030482] mmc0: invalid bus width
[84775.030505] mmc0: error -22 whilst initialising SD card
[84783.292341] mmc0: error -110 whilst initialising SD card
[84791.572502] mmc0: error -110 whilst initialising SD card
[84792.646956] mmc0: invalid bus width
[84792.646983] mmc0: error -22 whilst initialising SD card
[84792.710795] mmc0: invalid bus width
[84792.710818] mmc0: error -22 whilst initialising SD card
[84800.973339] mmc0: error -110 whilst initialising SD card
[84809.251471] mmc0: error -110 whilst initialising SD card
[84810.327282] mmc0: invalid bus width
[84810.327309] mmc0: error -22 whilst initialising SD card
[84810.391087] mmc0: invalid bus width
[84810.391112] mmc0: error -22 whilst initialising SD card
[84818.653290] mmc0: error -110 whilst initialising SD card
[84837.536482] mmc0: error -110 whilst initialising SD card
[84838.647701] mmc0: invalid bus width
[84838.647729] mmc0: error -22 whilst initialising SD card
[84838.711360] mmc0: invalid bus width
[84838.711385] mmc0: error -22 whilst initialising SD card
[84846.973335] mmc0: error -110 whilst initialising SD card
[84855.251462] mmc0: