Headless rpi02w not connecting to ssh using disk image from rpi0w
Nobody has claimed this yet.
Assessment
- Difficulty
- 4/5
- Estimated time
- 3-5 days
- Newbie friendliness
- 25/100
- Issue type
- Bug
- Clarity
- Needs clarification
- Activity status
- Stale
- Tech stack
- linux, raspberry-pi
- Domain
- embedded-iot, networking
Research direction
Start by reproducing the boot and network behavior with the disk image on both the Raspberry Pi Zero W and Zero 2 W, then review the Raspberry Pi OS Bullseye and SSH setup details linked in the report. Compare boot and network logs from each device; done means the image connects to Wi-Fi and accepts SSH on the Zero 2 W without breaking the original device.
Written by the indexing model from the issue text.
Description
I have a disk image, created using the steps described here (https://www.raspberrypi.com/documentation/computers/getting-started.html), from a rpi0w. I would like to run this disk image on a rpi02w.
The disk image contains the OS and various software I've put onto the rpi0w. I've validated that this disk image works on other rpi0w units, can connect to wifi, and ssh.
When I try using this disk image in a rpi02w, I see that it is booting (LED lights up and shows activity), but it does not appear on my network.
What I've tried to do:
- run update and upgrade on the software while the SD card is in the rpi0w to make sure it's fully up to date.
- run full-upgrade;
- manually upgrade from Buster to Bullseye following these steps: https://www.tomshardware.com/how-to/upgrade-raspberry-pi-os-to-bullseye-from-buster
- add a fresh wpa_supplicant.conf file to the SD card
- add a fresh ssh empty file to the SD card
None of these steps have resulted in seeing the rpi02w on the network or being able to SSH. After each of these steps, I validated that the SD card still worked fine in the rpi0w.
cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
Please help!
- Dominant language
- No language data
- Stars
- 5.6k
- Forks
- 1.7k
- PR merge metrics
- No merged PRs in 30d
Contributor guide
No contributing guide indexed for this repository
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
More from raspberrypi/firmware
-
Difficulty 4/5 3-5 days Newbie friendliness 38/100
raspberrypi/firmware#2042 ·
-
Difficulty 4/5 3-5 days Newbie friendliness 48/100
raspberrypi/firmware#2040 · 2 comments ·
-
Difficulty 5/5 Over a week Newbie friendliness 25/100
raspberrypi/firmware#2039 · 6 comments ·
-
Difficulty 4/5 3-5 days Newbie friendliness 42/100
raspberrypi/firmware#2038 · 4 comments ·
-
Difficulty 4/5 3-5 days Newbie friendliness 38/100
raspberrypi/firmware#2037 · 4 comments ·
All issues in raspberrypi/firmware
Similar issues
-
Difficulty 2/5 1-3 hours Newbie friendliness 88/100
zephyrproject-rtos/zephyr#119726 ·
-
enhancement
Difficulty 2/5 1-3 hours Newbie friendliness 76/100
-
[adam] AdamNet network read doesn't cap to MAX_ADAM_PACKET_LEN, overflows client receive buffers Open
Difficulty 2/5 1-3 hours Newbie friendliness 88/100
FujiNetWIFI/fujinet-firmware#1649 · 2 comments ·
-
Difficulty 2/5 1-3 hours Newbie friendliness 68/100
espressif/esp-iot-solution#786 ·
-
Difficulty 2/5 1-3 hours Newbie friendliness 88/100