Beggining with my lumen, couple of issues
Open
Nobody has claimed this yet.
- Dominant language
- Python
- Stars
- 19
- Forks
- 36
- PR merge metrics
- No merged PRs in 30d
Description
- When assembling my lumen v4.0.1., Y striker cannot be secured with M5x25mm socket head bolt as noted in documentation. I used M5x16mm found in parts kit;
- Then, when Y striker is secured, it is too low for the y stop switch. Upon first homing, i got y axis to try to move beyond physical capabilities and crashed into frame, cause y switch didn't get triggered; Y striker needs to be lifted ~3mm to be aligned with a stop switch;
- I am not able to get any image when using top camera with 1920x1080 5FPS YUKV. Sometimes its gibberish, sometimes its blank. But i get good image when using 1920x1080 30FPS MJPG. I got not option to set 1920x1080 10FPS.
OpenPNP version 2023-04-05_08.24-36.0aa4ae8
Ubuntu 24.04.2 LTS
Hardware: CPU i5-3570k @ 3.4Ghz, 2×4GB DDR3-1600, GPU ASUS RX 570 4GB
Contributor guide
No contributing guide indexed for this repository
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
Research direction
No file or test is named. Start by locating the Lumen v4.0.1 assembly documentation and the OpenPnP camera configuration, then verify the reported bolt, Y-striker alignment, and YUYV/MJPG behavior. Done means the assembly guidance prevents the collision and the camera limitations or required settings are documented.
Written by the indexing model from the issue text.
Assessment
- Tech stack
- ubuntu
- Domain
- computer-vision, documentation, embedded-iot
- Issue type
- Bug
- Difficulty
- 4/5
- Estimated time
- 3-5 days
- Activity status
- Stale
- Clarity
- Mostly clear
- Newbie friendliness
- 35/100