Assembly difficulties
Open
Nobody has claimed this yet.
- Dominant language
- Shell
- Stars
- 494
- Forks
- 25
- PR merge metrics
- No merged PRs in 30d
Description
Can you share any photos or experiences from your assembly?
Assembly issues:
- I can't figure out how to install the camera module in the top of the print, even without the flex attached. It seems like the camera sensor housing is meant to slip through the gap in the ring, but the screw bosses interfere with components on the bottom of the camera board.
- Does your "Apple medallion" fit in place at the back? The camera flex appears to block it as it needs an extra bit of room to do a 90 degree bend.
Things that work well:
- The RPiZero fits in nicely and the screws hold it neatly in place.
- The Front lens assembly fits snugly into the camera ring and the iris actuates nicely.
Contributor guide
No contributing guide indexed for this repository
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
Research direction
Start by reviewing the physical assembly described in the issue: the camera module, camera ring, Apple medallion, camera flex, RPiZero, and front lens assembly. Reproduce the reported fit and clearance problems against the printed parts. The issue does not name files or tests, and completion criteria are not specified beyond resolving the reported assembly interference.
Written by the indexing model from the issue text.
Assessment
- Tech stack
- raspberry-pi
- Domain
- embedded-iot
- Issue type
- Bug
- Difficulty
- 4/5
- Estimated time
- 3-5 days
- Activity status
- Stale
- Clarity
- Needs clarification
- Newbie friendliness
- 25/100