Alternate OS for 3.1MP Camera BeagleBone Cape

```
Hi all,
Has anyone had success with using the new 3.1MP Camera cape (on the LCD7) with
non Angstrom flavors?

I loved working with ICS and JB before I got the camera, because apps were
easier to make, but now the system powers up (JB) and then the status lights
fade on the camera board.

I made sure the EEPROM switches were set differently. That LED fade makes me
wonder about power problems, but I have a 3A supply running to the system.

I'm currently obtaining Angstrom A6A- just to make sure all is well with the
hardware in the first place.

The following link is to the PDF manual for the camera:
https://github.com/CircuitCo/BeagleBone-3.1MP-Camera/blob/master/BeagleBone-3.1M
P-Camera-RevA2-srm.pdf?raw=true

As far as hardware goes: BBone: A5, LCD7: A2, CameraCape: A2, and Camera
Sensor: A2

I hope I've covered anything you'd want to know, but please keep me posted.
Thanks so much in advance,

Atlas

```

Original issue reported on code.google.com by `Atlas.KTa` on 29 Oct 2012 at 6:47

The issue names the BeagleBone A5, LCD7 A2, CameraCape A2, Camera Sensor A2, and Android ICS/JB versus Angstrom. Start by reproducing the camera behavior on the listed hardware and software versions, then compare the working and failing configurations. Done would mean identifying whether the problem is hardware, power, or OS compatibility and recording the result.

Written by the indexing model from the issue text.