Key bar memory map error if key bar starting address is not 4K aligned

Running into root port key bar mapping error for CXL device populated to port2/port4/port6.

Failing environment details:
teeio validator configuration file as below. 0000:b0:06.0 is root port4 of pxp4.
[Main]
debug_level = verbose
pci_log = 0
libspdm_log = 0
pcap_enable = 0
doe_log = 0

[Ports]
rootport_1 = 06.0 ; dev/func of rootport 1
endpoint_1 = 00.0 ; dev/func of endpoint 1

[Topology_1]
type = link_ide ; Link IDE
connection = direct ; Directly connected EP
segment = 0x0000
bus = 0xb0
path1 = rootport_1,endpoint_1
stream_id = 0 ;always 0

[Configuration_1]
type = link_ide ; refer to IdeKmTestConfiguration.LinkIDE.md
category = cxl-ide
cxl_ide_mode = skid ;either skid or containment
default = 1 ; refer to IdeKmTestConfiguration.LinkIDE.md#no_special
pcrc_disable = 0
ide_stop = 0
cxl_get_key = 0

2. Error message from teeio validator when running command "./teeio_validator -f cxl_skid.ini -t 1 -c 1 -s Test.IdeStream"

[2026-03-04 04:56:18.543][error] Failed to mmap kcbar
TEEIO_ASSERT: /root/repo/tee-io-validator/teeio-validator/library/pcie_ide_lib/intel_rp_pcie.c(321): false

Root cause I believe it is failure in mmap() call in teeio validator, when key bar begins at an address which is not 4K aligned. The last 16-bit of key bar starting addresses usually are 2000h/2400h/2800h/2c00h for port0/2/4/6. While mmap() system call doesn't support non 4K aligned memory map.

I verified the root cause by a quick code change with below. It worked well.

[root@fuxiaogu-mobl1 tee-io-validator]# git diff
diff --git a/teeio-validator/library/pcie_ide_lib/intel_rp_pcie.c b/teeio-validator/library/pcie_ide_lib/intel_rp_pcie.c
index 7a301ac..d691482 100644
--- a/teeio-validator/library/pcie_ide_lib/intel_rp_pcie.c
+++ b/teeio-validator/library/pcie_ide_lib/intel_rp_pcie.c
@@ -201,7 +201,8 @@ uint8_t* map_kcbar_addr(uint64_t addr, int* mapped_fd)
TEEIO_DEBUG ((TEEIO_DEBUG_ERROR, "Failed to open /dev/mem\n"));
return NULL;
}
- uint8_t * mem_ptr = (uint8_t *)mmap(NULL, KCBAR_MEMORY_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, mem_fd, addr);
+ TEEIO_DEBUG ((TEEIO_DEBUG_INFO, "mmap address = 0x%x, aligning to 0x%x\n", addr, (addr-0x800)));
+ uint8_t * mem_ptr = (uint8_t *)mmap(NULL, 3072, PROT_READ | PROT_WRITE, MAP_SHARED, mem_fd, (addr-0x800));
if (mem_ptr == MAP_FAILED) {
TEEIO_DEBUG ((TEEIO_DEBUG_ERROR, "Failed to mmap kcbar\n"));
close(mem_fd);
@@ -210,7 +211,7 @@ uint8_t* map_kcbar_addr(uint64_t addr, int* mapped_fd)

*mapped_fd = mem_fd;

- return mem_ptr;
+ return(uint8_t *)((uint64_t)mem_ptr+0x800);
}