Not working in Debian Trixie in a Samsung Galaxy Book4 Pro 360

After following all the steps of the four modules, its not working:

My system:
Debian 13 Trixie (new install)
Kernel 6.12.12-amd64
Samsung Galaxy Book4 Pro 360
```
$ sudo dkms status
ipu6-drivers/0.0.0, 6.12.12-amd64, x86_64: installed
usbio-drivers/0.0.1, 6.12.12-amd64, x86_64: installed
```

```
$ sudo dmesg | grep -iE 'ipu6|02c1|int34'
[ 21.722323] int3472-discrete INT3472:01: reset \_SB.GPI0 pin number mismatch _DSM 12 resource 108
[ 21.722372] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 41 resource 201
[ 21.722533] int3472-discrete INT3472:01: privacy-led \_SB.GPI0 pin number mismatch _DSM 33 resource 129
[ 21.722660] int3472-discrete INT3472:01: clk-enable \_SB.GPI0 pin number mismatch _DSM 36 resource 388
[ 21.807000] intel-ipu6 0000:00:05.0: enabling device (0000 -> 0002)
[ 21.807147] intel-ipu6 0000:00:05.0: IPU6 in secure mode touch 0x80000000 mask 0x0
[ 21.813224] intel-ipu6 0000:00:05.0: FW version: 20230925
[ 21.814121] intel-ipu6 0000:00:05.0: Found supported sensor OVTI02C1:00
[ 21.814201] intel-ipu6 0000:00:05.0: Connected 1 cameras
[ 21.815257] intel-ipu6 0000:00:05.0: Sending BOOT_LOAD to CSE
[ 21.876423] intel-ipu6 0000:00:05.0: Sending AUTHENTICATE_RUN to CSE
[ 21.953870] intel-ipu6 0000:00:05.0: CSE authenticate_run done
[ 21.953876] intel-ipu6 0000:00:05.0: IPU6-v4[7d19] hardware version 6
```
```
$ sudo -E LANG=C gst-launch-1.0 icamerasrc buffer-count=7 ! video/x-raw,format=NV12,width=1280,height=720 ! videoconvert ! ximagesink
[02-17 21:09:01.845] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
[02-17 21:09:01.845] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
[02-17 21:09:01.845] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
[02-17 21:09:01.845] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
[02-17 21:09:01.845] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
[02-17 21:09:01.845] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
[02-17 21:09:01.882] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
[02-17 21:09:01.882] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
[02-17 21:09:01.882] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
[02-17 21:09:01.882] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
[02-17 21:09:01.882] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
[02-17 21:09:01.882] CamHAL[ERR] readlink sysName /sys/dev/char/0:0 failed ret -1.
WARNING: erroneous pipeline: could not link camerasrc0 to videoconvert0, camerasrc0 can't handle caps video/x-raw, format=(string)NV12, width=(int)1280, height=(int)720
```
```
$ v4l2-ctl --list-devices
ipu6 ():
/dev/video0
/dev/video1
/dev/video2
/dev/video3
/dev/video4
/dev/video5
/dev/video6
/dev/video7
/dev/video8
/dev/video9
/dev/video10
/dev/video11
/dev/video12
/dev/video13
/dev/video14
/dev/video15
/dev/video16
/dev/video17
/dev/video18
/dev/video19
/dev/video20
/dev/video21
/dev/video22
/dev/video23
/dev/video24
/dev/video25
/dev/video26
/dev/video27
/dev/video28
/dev/video29
/dev/video30
/dev/video31
/dev/video32
/dev/video33
/dev/video34
/dev/video35
/dev/video36
/dev/video37
/dev/video38
/dev/video39
/dev/video40
/dev/video41
/dev/video42
/dev/video43
/dev/video44
/dev/video45
/dev/video46
/dev/video47

ipu6 (PCI:0000:00:05.0):
/dev/media0
```
Also not working with Cheese or any other webcam app.