global data in s3 bucket not a valid Cloud Optimized GeoTiff

Hey!
Firstly, thanks so much for releasing these data and the models - it's really interesting and exciting! I have a question regarding the file format for the global data on the s3 bucket at:
s3://dataforgood-fb-data/forests/v1/alsgedi_global_v6_float/chm/

It appears that the tif files are not valid Cloud Optimized Geotiffs - it would be amazing if valid COGS could be made available to improve the accessibility of these data.

example to verify COG status using [riocogeo](https://cogeotiff.github.io/rio-cogeo/) and gdalinfo:

```
export AWS_NO_SIGN_REQUEST=YES

path="/vsis3/dataforgood-fb-data/forests/v1/alsgedi_global_v6_float/chm/300001101.tif"

rio cogeo validate $path
gdalinfo $path
```
```
The following warnings were found:
- The file is greater than 512xH or 512xW, it is recommended to include internal overviews

The following errors were found:
- The file is greater than 512xH or 512xW, but is not tiled
/vsis3/dataforgood-fb-data/forests/v1/alsgedi_global_v6_float/chm/300001101.tif is NOT a valid cloud optimized GeoTIFF
Driver: GTiff/GeoTIFF
Files: /vsis3/dataforgood-fb-data/forests/v1/alsgedi_global_v6_float/chm/300001101.tif
Size is 65536, 65536
Coordinate System is:
PROJCRS["WGS 84 / Pseudo-Mercator",
BASEGEOGCRS["WGS 84",
ENSEMBLE["World Geodetic System 1984 ensemble",
MEMBER["World Geodetic System 1984 (Transit)"],
MEMBER["World Geodetic System 1984 (G730)"],
MEMBER["World Geodetic System 1984 (G873)"],
MEMBER["World Geodetic System 1984 (G1150)"],
MEMBER["World Geodetic System 1984 (G1674)"],
MEMBER["World Geodetic System 1984 (G1762)"],
MEMBER["World Geodetic System 1984 (G2139)"],
ELLIPSOID["WGS 84",6378137,298.257223563,
LENGTHUNIT["metre",1]],
ENSEMBLEACCURACY[2.0]],
PRIMEM["Greenwich",0,
ANGLEUNIT["degree",0.0174532925199433]],
ID["EPSG",4326]],
CONVERSION["Popular Visualisation Pseudo-Mercator",
METHOD["Popular Visualisation Pseudo Mercator",
ID["EPSG",1024]],
PARAMETER["Latitude of natural origin",0,
ANGLEUNIT["degree",0.0174532925199433],
ID["EPSG",8801]],
PARAMETER["Longitude of natural origin",0,
ANGLEUNIT["degree",0.0174532925199433],
ID["EPSG",8802]],
PARAMETER["False easting",0,
LENGTHUNIT["metre",1],
ID["EPSG",8806]],
PARAMETER["False northing",0,
LENGTHUNIT["metre",1],
ID["EPSG",8807]]],
CS[Cartesian,2],
AXIS["easting (X)",east,
ORDER[1],
LENGTHUNIT["metre",1]],
AXIS["northing (Y)",north,
ORDER[2],
LENGTHUNIT["metre",1]],
USAGE[
SCOPE["Web mapping and visualisation."],
AREA["World between 85.06°S and 85.06°N."],
BBOX[-85.06,-180,85.06,180]],
ID["EPSG",3857]]
Data axis to CRS axis mapping: 1,2
Origin = (1017529.720532266306691,0.000000000000000)
Pixel Size = (1.194328566955877,-1.194328566955879)
Metadata:
AREA_OR_POINT=Area
UNITS=METERS
Image Structure Metadata:
COMPRESSION=DEFLATE
INTERLEAVE=BAND
PREDICTOR=2
Corner Coordinates:
Upper Left ( 1017529.721, 0.000) ( 9d 8'26.25"E, 0d 0' 0.01"N)
Lower Left ( 1017529.721, -78271.517) ( 9d 8'26.25"E, 0d42'11.19"S)
Upper Right ( 1095801.237, 0.000) ( 9d50'37.50"E, 0d 0' 0.01"N)
Lower Right ( 1095801.237, -78271.517) ( 9d50'37.50"E, 0d42'11.19"S)
Center ( 1056665.479, -39135.758) ( 9d29'31.87"E, 0d21' 5.62"S)
Band 1 Block=65536x1 Type=Byte, ColorInterp=Gray
```

And also I saw somewhere that an "image date" layer had been made available on earth engine, are there any plans to also include this layer in the s3 bucket?

Many thanks,
Hugh