sht3xd not connecting after latest update

### The problem

The sht3xd I2C sensor no longer works on my weather station. This was as a direct result of the latest esphome update.

The sht3xd still shows in the I2C scan.

### Which version of ESPHome has the issue?

2023.12.5

### What type of installation are you using?

Home Assistant Add-on

### Which version of Home Assistant has the issue?

2023.12.3

### What platform are you using?

ESP32

### Board

ESP32MiniKit

### Component causing the issue

sht3xd

### Example YAML snippet

```yaml
esphome:
name: weather-station
friendly_name: weather-station

esp32:
board: esp32dev
framework:
type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
encryption:
key:

ota:
password:

i2c:
sda: 21
scl: 22
scan: True

sun:
latitude:
longitude:

wifi:
networks:
- ssid: !secret wifi_ssid
password: !secret wifi_password
bssid:
fast_connect: true

# Optional manual IP
manual_ip:
static_ip:
gateway:
subnet:

# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Weather-Station Fallback Hotspot"
password:

sensor:

####Wifi Signal Start####
- platform: wifi_signal # Reports the WiFi signal strength/RSSI in dB
name: "WiFi Signal dB"
id: wifi_signal_db
update_interval: 60s
entity_category: "diagnostic"

- platform: copy # Reports the WiFi signal strength in %
source_id: wifi_signal_db
name: "WiFi Signal Percent"
filters:
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
unit_of_measurement: "Signal %"
entity_category: "diagnostic"
####Wifi Signal END###

####Tempreature & Humidity Start####
- platform: sht3xd
temperature:
name: "Temperature"
humidity:
name: "Humidity"
address: 0x44
update_interval: 60s
####Tempreature & Humidity END####

####Rainfall Start####
- platform: pulse_counter
pin:
# Don't forget to add a pulling resistor, see README
number: GPIO32
mode: INPUT
unit_of_measurement: 'mm'
name: "${friendly_name} rain gauge"
icon: 'mdi:weather-rainy'
id: rain_gauge
internal: true
count_mode:
rising_edge: DISABLE
falling_edge: INCREMENT
internal_filter: 13us
update_interval: 10s
filters:
# Each 0.011" (0.2794mm) of rain causes one momentary contact closure
- multiply: 0.2
accuracy_decimals: 4

- platform: integration
name: "${friendly_name} rainfall per min"
id: rain_per_min
time_unit: min
unit_of_measurement: 'mm'
icon: 'mdi:weather-rainy'
sensor: rain_gauge

- platform: total_daily_energy
name: "${friendly_name} total daily rain"
power_id: rain_gauge
unit_of_measurement: 'mm'
icon: 'mdi:weather-rainy'
# x60 To convert to aggregated rain amount
filters:
- multiply: 60
####Rainfall End####

####Sun Start####
- platform: sun
name: "Sun elevation"
type: elevation
update_interval: 120s

- platform: sun
name: "Sun azimuth"
type: azimuth
update_interval: 120s
####Sun End####

####Wind Speed Start####
- platform: pulse_meter
pin:
number: GPIO33
mode: INPUT
id: wind_speed
unit_of_measurement: 'm/s'
name: "${friendly_name} wind speed"
icon: 'mdi:weather-windy'
internal_filter: 13us
timeout: 5s
filters:
- multiply: 0.005560619
- sliding_window_moving_average:
window_size: 5
send_every: 5
####Wind Speed END####

- platform: copy
name: '${friendly_name} wind speed average'
icon: 'mdi:weather-windy'
id: wind_speed_avg
source_id: wind_speed
unit_of_measurement: 'm/s'
filters:
- throttle_average: 5s

- platform: copy
name: '${friendly_name} wind speed (km/h)'
id: wind_speed_kmh
source_id: wind_speed
unit_of_measurement: 'km/h'
icon: 'mdi:weather-windy'
filters:
- multiply: 3.6

- platform: copy
name: '${friendly_name} wind speed average (km/h)'
icon: 'mdi:weather-windy'
id: wind_speed_kmh_avg
source_id: wind_speed_avg
unit_of_measurement: 'km/h'
filters:
- multiply: 3.6
on_value:
lambda: |-
if (x < 1) {
id(wind_scale_code).publish_state("0");
id(wind_scale).publish_state("Calm");
} else if (x >= 1 && x < 6) {
id(wind_scale_code).publish_state("1");
id(wind_scale).publish_state("Light Air");
} else if (x >= 6 && x < 12) {
id(wind_scale_code).publish_state("2");
id(wind_scale).publish_state("Light Breeze");
} else if (x >= 12 && x < 20) {
id(wind_scale_code).publish_state("3");
id(wind_scale).publish_state("Gentle Breeze");
} else if (x >= 20 && x < 29) {
id(wind_scale_code).publish_state("4");
id(wind_scale).publish_state("Moderate Breeze");
} else if (x >= 29 && x < 39) {
id(wind_scale_code).publish_state("5");
id(wind_scale).publish_state("Fresh Breeze");
} else if (x >= 39 && x < 50) {
id(wind_scale_code).publish_state("6");
id(wind_scale).publish_state("Strong Breeze");
} else if (x >= 50 && x < 62) {
id(wind_scale_code).publish_state("7");
id(wind_scale).publish_state("Near Gale");
} else if (x >= 62 && x < 75) {
id(wind_scale_code).publish_state("8");
id(wind_scale).publish_state("Gale");
} else if (x >= 75 && x < 89) {
id(wind_scale_code).publish_state("9");
id(wind_scale).publish_state("Severe Gale");
} else if (x >= 89 && x < 103) {
id(wind_scale_code).publish_state("10");
id(wind_scale).publish_state("Storm");
} else if (x >= 103 && x < 118) {
id(wind_scale_code).publish_state("11");
id(wind_scale).publish_state("Violent Storm");
} else if (x >= 118) {
id(wind_scale_code).publish_state("12");
id(wind_scale).publish_state("Hurricane Force");
} else {
ESP_LOGD("main", "It shouldn't happen (wind_speed_kmh_avg: %f)", x);
}

####Wind Direction Start####
- platform: mlx90393
address: 0x0c
id: mlx
x_axis:
name: "mlx_x"
id: "mlx_x"
y_axis:
name: "mlx_y"
id: "mlx_y"
z_axis:
name: "mlx_z"
update_interval: 2s

- platform: template
id: 'wind_direction'
name: 'Wind Direction'
update_interval: 2s
lambda: |-
float w1 = id(mlx_x).state; // magnetometer X
float w0 = id(mlx_y).state; // magnetometer Y
float w = atan2(w0, w1); // arctangent2 = radians
w = (w * 180) / M_PI; // radians to degrees
w += 19.50; // magnetic declination
w += 68.00; // seems to be off by 90
if ( w < 0 ) w += 360.0; // adjust for negatives
return w;
####END Wind Direction####

####FAN Switch Start####
switch:
- platform: gpio
pin: 25
name: "Fan"
inverted: True
####Fan Switch END####

####Status LED Start####
light:
- platform: neopixelbus
type: GRB
variant: WS2811
pin: GPIO23
num_leds: 1
name: "Status LED"
####Status LED END####

####Rain Reset Timer Start####
interval:
- interval: 60s
then:
- sensor.integration.reset: rain_per_min
####Rain Reset Timer END####

####Time Start####
time:
- platform: homeassistant
####Time End####

text_sensor:
- platform: sun
name: Sun Next Sunrise
type: sunrise
- platform: sun
name: Sun Next Sunset
type: sunset

- platform: template
name: '${friendly_name} Beaufort wind scale code'
icon: 'mdi:tailwind'
id: wind_scale_code

- platform: template
name: '${friendly_name} Beaufort wind scale'
icon: 'mdi:tailwind'
id: wind_scale
update_interval: never
```

### Anything in the logs that might be useful for us?

```txt
[21:58:36][E][sht3xd:036]: Communication with SHT3xD failed!

INFO ESPHome 2023.12.5
INFO Reading configuration /config/esphome/weather-station.yaml...
INFO Detected timezone
INFO Starting log output from using esphome API
INFO Successfully connected to weather-station @ in 0.111s
INFO Successful handshake with weather-station @ in 0.107s
[22:02:17][I][app:102]: ESPHome version 2023.12.5 compiled on Dec 26 2023, 21:04:23
[22:02:17][C][wifi:573]: WiFi:
[22:02:17][C][wifi:405]: Local MAC:
[22:02:17][C][wifi:410]: SSID: [redacted]
[22:02:17][C][wifi:411]: IP Address:
[22:02:17][C][wifi:413]: BSSID: [redacted]
[22:02:17][C][wifi:414]: Hostname: 'weather-station'
[22:02:17][C][wifi:416]: Signal strength: -71 dB ▂▄▆█
[22:02:17][C][wifi:420]: Channel: 6
[22:02:17][C][wifi:421]: Subnet:
[22:02:17][C][wifi:422]: Gateway:
[22:02:17][C][wifi:423]: DNS1: 0.0.0.0
[22:02:17][C][wifi:424]: DNS2: 0.0.0.0
[22:02:17][C][logger:443]: Logger:
[22:02:17][C][logger:444]: Level: DEBUG
[22:02:17][C][logger:445]: Log Baud Rate: 115200
[22:02:17][C][logger:447]: Hardware UART: UART0
[22:02:17][C][i2c.arduino:053]: I2C Bus:
[22:02:17][C][i2c.arduino:054]: SDA Pin: GPIO21
[22:02:17][C][i2c.arduino:055]: SCL Pin: GPIO22
[22:02:17][C][i2c.arduino:056]: Frequency: 50000 Hz
[22:02:17][C][i2c.arduino:059]: Recovery: bus successfully recovered
[22:02:17][I][i2c.arduino:069]: Results from i2c bus scan:
[22:02:17][I][i2c.arduino:075]: Found i2c device at address 0x0C
[22:02:17][I][i2c.arduino:075]: Found i2c device at address 0x40
[22:02:17][I][i2c.arduino:075]: Found i2c device at address 0x44
[22:02:17][C][template.sensor:022]: Template Sensor 'Wind Direction'
[22:02:17][C][template.sensor:022]: State Class: ''
[22:02:17][C][template.sensor:022]: Unit of Measurement: ''
[22:02:17][C][template.sensor:022]: Accuracy Decimals: 1
[22:02:17][C][template.sensor:023]: Update Interval: 2.0s
[22:02:17][C][switch.gpio:068]: GPIO Switch 'Fan'
[22:02:17][C][switch.gpio:076]: Inverted: YES
[22:02:17][C][switch.gpio:091]: Restore Mode: always OFF
[22:02:17][C][switch.gpio:031]: Pin: GPIO25
[22:02:17][C][template.text_sensor:020]: Template Sensor '${friendly_name} Beaufort wind scale code'
[22:02:17][C][template.text_sensor:020]: Icon: 'mdi:tailwind'
[22:02:17][C][template.text_sensor:020]: Template Sensor '${friendly_name} Beaufort wind scale'
[22:02:17][C][template.text_sensor:020]: Icon: 'mdi:tailwind'
[22:02:18][C][light:103]: Light 'Status LED'
[22:02:18][C][light:105]: Default Transition Length: 1.0s
[22:02:18][C][light:106]: Gamma Correct: 2.80
[22:02:18][C][copy.sensor:015]: Copy Sensor 'WiFi Signal Percent'
[22:02:18][C][copy.sensor:015]: Device Class: 'signal_strength'
[22:02:18][C][copy.sensor:015]: State Class: 'measurement'
[22:02:18][C][copy.sensor:015]: Unit of Measurement: 'Signal %'
[22:02:18][C][copy.sensor:015]: Accuracy Decimals: 0
[22:02:18][C][sht3xd:033]: SHT3xD:
[22:02:18][C][sht3xd:034]: Address: 0x44
[22:02:18][E][sht3xd:036]: Communication with SHT3xD failed!
[22:02:18][C][sht3xd:038]: Update Interval: 60.0s
[22:02:18][C][sht3xd:040]: Temperature 'Temperature'
[22:02:18][C][sht3xd:040]: Device Class: 'temperature'
[22:02:18][C][sht3xd:040]: State Class: 'measurement'
[22:02:18][C][sht3xd:040]: Unit of Measurement: '°C'
[22:02:18][C][sht3xd:040]: Accuracy Decimals: 1
[22:02:18][C][sht3xd:041]: Humidity 'Humidity'
[22:02:18][C][sht3xd:041]: Device Class: 'humidity'
[22:02:18][C][sht3xd:041]: State Class: 'measurement'
[22:02:18][C][sht3xd:041]: Unit of Measurement: '%'
[22:02:18][C][sht3xd:041]: Accuracy Decimals: 1
[22:02:18][C][pulse_counter:160]: Pulse Counter '${friendly_name} rain gauge'
[22:02:18][C][pulse_counter:160]: State Class: 'measurement'
[22:02:18][C][pulse_counter:160]: Unit of Measurement: 'mm'
[22:02:18][C][pulse_counter:160]: Accuracy Decimals: 4
[22:02:18][C][pulse_counter:160]: Icon: 'mdi:weather-rainy'
[22:02:18][C][pulse_counter:161]: Pin: GPIO32
[22:02:18][C][pulse_counter:162]: Rising Edge: DISABLE
[22:02:18][C][pulse_counter:163]: Falling Edge: INCREMENT
[22:02:18][C][pulse_counter:164]: Filtering pulses shorter than 13 µs
[22:02:18][C][pulse_counter:165]: Update Interval: 10.0s
[22:02:18][C][integration:024]: Integration Sensor '${friendly_name} rainfall per min'
[22:02:18][C][integration:024]: State Class: ''
[22:02:18][C][integration:024]: Unit of Measurement: 'mm'
[22:02:18][C][integration:024]: Accuracy Decimals: 6
[22:02:18][C][integration:024]: Icon: 'mdi:weather-rainy'
[22:02:18][C][total_daily_energy:023]: Total Daily Energy '${friendly_name} total daily rain'
[22:02:18][C][total_daily_energy:023]: Device Class: 'energy'
[22:02:18][C][total_daily_energy:023]: State Class: 'total_increasing'
[22:02:18][C][total_daily_energy:023]: Unit of Measurement: 'mm'
[22:02:18][C][total_daily_energy:023]: Accuracy Decimals: 6
[22:02:18][C][total_daily_energy:023]: Icon: 'mdi:weather-rainy'
[22:02:18][C][sun.sensor:009]: Sun Sensor 'Sun elevation'
[22:02:18][C][sun.sensor:009]: State Class: ''
[22:02:18][C][sun.sensor:009]: Unit of Measurement: '°'
[22:02:18][C][sun.sensor:009]: Accuracy Decimals: 1
[22:02:18][C][sun.sensor:009]: Icon: 'mdi:weather-sunset'
[22:02:18][C][sun.sensor:009]: Sun Sensor 'Sun azimuth'
[22:02:18][C][sun.sensor:009]: State Class: ''
[22:02:18][C][sun.sensor:009]: Unit of Measurement: '°'
[22:02:18][C][sun.sensor:009]: Accuracy Decimals: 1
[22:02:18][C][sun.sensor:009]: Icon: 'mdi:weather-sunset'
[22:02:18][C][pulse_meter:090]: Pulse Meter '${friendly_name} wind speed'
[22:02:18][C][pulse_meter:090]: State Class: 'measurement'
[22:02:18][C][pulse_meter:090]: Unit of Measurement: 'm/s'
[22:02:18][C][pulse_meter:090]: Accuracy Decimals: 2
[22:02:18][C][pulse_meter:090]: Icon: 'mdi:weather-windy'
[22:02:18][C][pulse_meter:091]: Pin: GPIO33
[22:02:18][C][pulse_meter:093]: Filtering rising edges less than 13 µs apart
[22:02:18][C][pulse_meter:098]: Assuming 0 pulses/min after not receiving a pulse for 5s
[22:02:18][C][copy.sensor:015]: Copy Sensor '${friendly_name} wind speed average'
[22:02:18][C][copy.sensor:015]: State Class: 'measurement'
[22:02:18][C][copy.sensor:015]: Unit of Measurement: 'm/s'
[22:02:18][C][copy.sensor:015]: Accuracy Decimals: 2
[22:02:18][C][copy.sensor:015]: Icon: 'mdi:weather-windy'
[22:02:18][C][copy.sensor:015]: Copy Sensor '${friendly_name} wind speed (km/h)'
[22:02:18][C][copy.sensor:015]: State Class: 'measurement'
[22:02:18][C][copy.sensor:015]: Unit of Measurement: 'km/h'
[22:02:18][C][copy.sensor:015]: Accuracy Decimals: 2
[22:02:18][C][copy.sensor:015]: Icon: 'mdi:weather-windy'
[22:02:18][C][mlx90393:049]: MLX90393:
[22:02:18][C][mlx90393:050]: Address: 0x0C
[22:02:18][C][mlx90393:056]: Update Interval: 2.0s
[22:02:18][C][mlx90393:058]: X Axis 'mlx_x'
[22:02:18][C][mlx90393:058]: State Class: 'measurement'
[22:02:18][C][mlx90393:058]: Unit of Measurement: 'µT'
[22:02:18][C][mlx90393:058]: Accuracy Decimals: 0
[22:02:18][C][mlx90393:058]: Icon: 'mdi:magnet'
[22:02:18][C][mlx90393:059]: Y Axis 'mlx_y'
[22:02:18][C][mlx90393:059]: State Class: 'measurement'
[22:02:18][C][mlx90393:059]: Unit of Measurement: 'µT'
[22:02:18][C][mlx90393:059]: Accuracy Decimals: 0
[22:02:18][C][mlx90393:059]: Icon: 'mdi:magnet'
[22:02:18][C][mlx90393:060]: Z Axis 'mlx_z'
[22:02:18][C][mlx90393:060]: State Class: 'measurement'
[22:02:18][C][mlx90393:060]: Unit of Measurement: 'µT'
[22:02:18][C][mlx90393:060]: Accuracy Decimals: 0
[22:02:18][C][mlx90393:060]: Icon: 'mdi:magnet'
[22:02:18][C][homeassistant.time:010]: Home Assistant Time:
[22:02:18][C][homeassistant.time:011]: Timezone: 'NZST-12NZDT,M9.5.0,M4.1.0/3'
[22:02:18][C][sun.text_sensor:009]: Sun Text Sensor 'Sun Next Sunrise'
[22:02:18][C][sun.text_sensor:009]: Icon: 'mdi:weather-sunset-up'
[22:02:18][C][sun.text_sensor:009]: Sun Text Sensor 'Sun Next Sunset'
[22:02:18][C][sun.text_sensor:009]: Icon: 'mdi:weather-sunset-down'
[22:02:18][C][copy.sensor:015]: Copy Sensor '${friendly_name} wind speed average (km/h)'
[22:02:18][C][copy.sensor:015]: State Class: 'measurement'
[22:02:18][C][copy.sensor:015]: Unit of Measurement: 'km/h'
[22:02:18][C][copy.sensor:015]: Accuracy Decimals: 2
[22:02:18][C][copy.sensor:015]: Icon: 'mdi:weather-windy'
[22:02:18][C][mdns:115]: mDNS:
[22:02:18][C][mdns:116]: Hostname: weather-station
[22:02:18][C][ota:097]: Over-The-Air Updates:
[22:02:18][C][ota:098]: Address:
[22:02:18][C][ota:101]: Using Password.
[22:02:18][C][api:139]: API Server:
[22:02:18][C][api:140]: Address:
[22:02:18][C][api:142]: Using noise encryption: YES
[22:02:18][C][wifi_signal.sensor:009]: WiFi Signal 'WiFi Signal dB'
[22:02:18][C][wifi_signal.sensor:009]: Device Class: 'signal_strength'
[22:02:18][C][wifi_signal.sensor:009]: State Class: 'measurement'
[22:02:18][C][wifi_signal.sensor:009]: Unit of Measurement: 'dBm'
[22:02:18][C][wifi_signal.sensor:009]: Accuracy Decimals: 0
[22:02:19][E][mlx90393:085]: failed to read data
[22:02:19][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.14 s).
[22:02:19][W][component:215]: Components should block for at most 20-30ms.
[22:02:19][D][sensor:094]: '${friendly_name} wind speed average': Sending state nan m/s with 2 decimals of accuracy
[22:02:19][D][sensor:094]: '${friendly_name} wind speed average (km/h)': Sending state nan km/h with 2 decimals of accuracy
[22:02:19][D][main:216]: It shouldn't happen (wind_speed_kmh_avg: nan)
[22:02:19][D][sensor:094]: 'Wind Direction': Sending state 264.00397 with 1 decimals of accuracy
[22:02:21][D][mlx90393:070]: received -3569.649902 219.519989 -13732.570312
[22:02:21][D][sensor:094]: 'mlx_x': Sending state -3569.64990 µT with 0 decimals of accuracy
[22:02:21][D][sensor:094]: 'mlx_y': Sending state 219.51999 µT with 0 decimals of accuracy
[22:02:21][D][sensor:094]: 'mlx_z': Sending state -13732.57031 µT with 0 decimals of accuracy
[22:02:21][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.17 s).
[22:02:21][W][component:215]: Components should block for at most 20-30ms.
[22:02:21][D][sensor:094]: 'Wind Direction': Sending state 263.98096 with 1 decimals of accuracy
[22:02:21][D][text_sensor:064]: 'Sun Next Sunset': Sending state '00:50:27'
[22:02:22][D][esp32.preferences:114]: Saving 1 preferences to flash...
[22:02:22][D][esp32.preferences:143]: Saving 1 preferences to flash: 1 cached, 0 written, 0 failed
[22:02:23][E][mlx90393:085]: failed to read data
[22:02:23][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.14 s).
[22:02:23][W][component:215]: Components should block for at most 20-30ms.
[22:02:23][D][sensor:094]: 'Wind Direction': Sending state 263.98096 with 1 decimals of accuracy
[22:02:24][D][sensor:094]: '${friendly_name} wind speed average': Sending state nan m/s with 2 decimals of accuracy
[22:02:24][D][sensor:094]: '${friendly_name} wind speed average (km/h)': Sending state nan km/h with 2 decimals of accuracy
[22:02:24][D][main:216]: It shouldn't happen (wind_speed_kmh_avg: nan)
[22:02:25][D][mlx90393:070]: received -3569.649902 217.069992 -13653.570312
[22:02:25][D][sensor:094]: 'mlx_x': Sending state -3569.64990 µT with 0 decimals of accuracy
[22:02:25][D][sensor:094]: 'mlx_y': Sending state 217.06999 µT with 0 decimals of accuracy
[22:02:25][D][sensor:094]: 'mlx_z': Sending state -13653.57031 µT with 0 decimals of accuracy
[22:02:25][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.18 s).
[22:02:25][W][component:215]: Components should block for at most 20-30ms.
[22:02:25][D][sensor:094]: 'Wind Direction': Sending state 264.02014 with 1 decimals of accuracy
[22:02:27][E][mlx90393:085]: failed to read data
[22:02:27][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.14 s).
[22:02:27][W][component:215]: Components should block for at most 20-30ms.
[22:02:27][D][pulse_counter:174]: '${friendly_name} rain gauge': Retrieved counter: 0.00 pulses/min
[22:02:27][D][sensor:094]: '${friendly_name} rain gauge': Sending state 0.00000 mm with 4 decimals of accuracy
[22:02:27][D][sensor:094]: '${friendly_name} rainfall per min': Sending state 0.00000 mm with 6 decimals of accuracy
[22:02:27][D][sensor:094]: '${friendly_name} total daily rain': Sending state 17.20008 mm with 6 decimals of accuracy
[22:02:27][D][sensor:094]: 'Wind Direction': Sending state 264.02014 with 1 decimals of accuracy
[22:02:29][E][mlx90393:085]: failed to read data
[22:02:29][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.14 s).
[22:02:29][W][component:215]: Components should block for at most 20-30ms.
[22:02:29][D][sensor:094]: '${friendly_name} wind speed average': Sending state nan m/s with 2 decimals of accuracy
[22:02:29][D][sensor:094]: '${friendly_name} wind speed average (km/h)': Sending state nan km/h with 2 decimals of accuracy
[22:02:29][D][main:216]: It shouldn't happen (wind_speed_kmh_avg: nan)
[22:02:29][D][sensor:094]: 'Wind Direction': Sending state 264.02014 with 1 decimals of accuracy
[22:02:31][D][mlx90393:070]: received -3570.629883 219.519989 -13554.820312
[22:02:31][D][sensor:094]: 'mlx_x': Sending state -3570.62988 µT with 0 decimals of accuracy
[22:02:31][D][sensor:094]: 'mlx_y': Sending state 219.51999 µT with 0 decimals of accuracy
[22:02:31][D][sensor:094]: 'mlx_z': Sending state -13554.82031 µT with 0 decimals of accuracy
[22:02:31][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.17 s).
[22:02:31][W][component:215]: Components should block for at most 20-30ms.
[22:02:31][D][text_sensor:064]: 'Sun Next Sunrise': Sending state '15:12:28'
[22:02:31][D][sensor:094]: 'Wind Direction': Sending state 263.98193 with 1 decimals of accuracy
[22:02:32][D][pulse_meter:077]: No pulse detected for 5s, assuming 0 pulses/min
[22:02:33][D][mlx90393:070]: received -3570.629883 217.559982 -13807.621094
[22:02:33][D][sensor:094]: 'mlx_x': Sending state -3570.62988 µT with 0 decimals of accuracy
[22:02:33][D][sensor:094]: 'mlx_y': Sending state 217.55998 µT with 0 decimals of accuracy
[22:02:33][D][sensor:094]: 'mlx_z': Sending state -13807.62109 µT with 0 decimals of accuracy
[22:02:33][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.17 s).
[22:02:33][W][component:215]: Components should block for at most 20-30ms.
[22:02:33][D][sensor:094]: 'Wind Direction': Sending state 264.01324 with 1 decimals of accuracy
[22:02:33][D][sensor:094]: 'Sun elevation': Sending state 23.34587 ° with 1 decimals of accuracy
[22:02:34][D][sensor:094]: '${friendly_name} wind speed average': Sending state nan m/s with 2 decimals of accuracy
[22:02:34][D][sensor:094]: '${friendly_name} wind speed average (km/h)': Sending state nan km/h with 2 decimals of accuracy
[22:02:34][D][main:216]: It shouldn't happen (wind_speed_kmh_avg: nan)
[22:02:35][E][mlx90393:085]: failed to read data
[22:02:35][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.14 s).
[22:02:35][W][component:215]: Components should block for at most 20-30ms.
[22:02:35][D][sensor:094]: 'Wind Direction': Sending state 264.01324 with 1 decimals of accuracy
[22:02:35][D][sensor:094]: 'WiFi Signal dB': Sending state -76.00000 dBm with 0 decimals of accuracy
[22:02:35][D][sensor:094]: 'WiFi Signal Percent': Sending state 48.00000 Signal % with 0 decimals of accuracy
[22:02:37][D][mlx90393:070]: received -3569.159912 217.069992 -13811.571289
[22:02:37][D][sensor:094]: 'mlx_x': Sending state -3569.15991 µT with 0 decimals of accuracy
[22:02:37][D][sensor:094]: 'mlx_y': Sending state 217.06999 µT with 0 decimals of accuracy
[22:02:37][D][sensor:094]: 'mlx_z': Sending state -13811.57129 µT with 0 decimals of accuracy
[22:02:37][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.17 s).
[22:02:37][W][component:215]: Components should block for at most 20-30ms.
[22:02:37][D][pulse_counter:174]: '${friendly_name} rain gauge': Retrieved counter: 0.00 pulses/min
[22:02:37][D][sensor:094]: '${friendly_name} rain gauge': Sending state 0.00000 mm with 4 decimals of accuracy
[22:02:37][D][sensor:094]: '${friendly_name} rainfall per min': Sending state 0.00000 mm with 6 decimals of accuracy
[22:02:37][D][sensor:094]: '${friendly_name} total daily rain': Sending state 17.20008 mm with 6 decimals of accuracy
[22:02:37][D][sensor:094]: 'Wind Direction': Sending state 264.01965 with 1 decimals of accuracy
[22:02:38][D][sensor:094]: '${friendly_name} wind speed': Sending state 0.28102 m/s with 2 decimals of accuracy
[22:02:38][D][sensor:094]: '${friendly_name} wind speed (km/h)': Sending state 1.01166 km/h with 2 decimals of accuracy
[22:02:39][D][mlx90393:070]: received -3569.159912 219.029999 -13625.919922
[22:02:39][D][sensor:094]: 'mlx_x': Sending state -3569.15991 µT with 0 decimals of accuracy
[22:02:39][D][sensor:094]: 'mlx_y': Sending state 219.03000 µT with 0 decimals of accuracy
[22:02:39][D][sensor:094]: 'mlx_z': Sending state -13625.91992 µT with 0 decimals of accuracy
[22:02:39][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.17 s).
[22:02:39][W][component:215]: Components should block for at most 20-30ms.
[22:02:39][D][sensor:094]: '${friendly_name} wind speed average': Sending state 0.28102 m/s with 2 decimals of accuracy
[22:02:39][D][sensor:094]: '${friendly_name} wind speed average (km/h)': Sending state 1.01166 km/h with 2 decimals of accuracy
[22:02:39][D][text_sensor:064]: '${friendly_name} Beaufort wind scale code': Sending state '1'
[22:02:39][D][text_sensor:064]: '${friendly_name} Beaufort wind scale': Sending state 'Light Air'
[22:02:39][D][sensor:094]: 'Wind Direction': Sending state 263.98831 with 1 decimals of accuracy
[22:02:39][D][sensor:094]: '${friendly_name} wind speed': Sending state 2.45861 m/s with 2 decimals of accuracy
[22:02:39][D][sensor:094]: '${friendly_name} wind speed (km/h)': Sending state 8.85101 km/h with 2 decimals of accuracy
[22:02:40][D][sensor:094]: '${friendly_name} wind speed': Sending state 1.66766 m/s with 2 decimals of accuracy
[22:02:40][D][sensor:094]: '${friendly_name} wind speed (km/h)': Sending state 6.00359 km/h with 2 decimals of accuracy
[22:02:41][E][mlx90393:085]: failed to read data
[22:02:41][W][component:214]: Component mlx90393.sensor took a long time for an operation (0.14 s).
[22:02:41][W][component:215]: Components should block for at most 20-30ms.
```

### Additional information

_No response_