Checksum error in received SML data with Landis E320

### The problem

SML component not working with Landis E320.
Checksum error in received SML data.

### Which version of ESPHome has the issue?

2023.8.3

### What type of installation are you using?

Home Assistant Add-on

### Which version of Home Assistant has the issue?

2023.9

### What platform are you using?

ESP8266

### Board

d1_mini_pro

### Component causing the issue

SML

### Example YAML snippet

```yaml
esphome:
name: smartmeter
friendly_name: Smartmeter

esp8266:
board: d1_mini_pro

# Enable logging
logger:
level: DEBUG
hardware_uart: UART1

# Enable Home Assistant API
api:

wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password

uart:
- id: uart_2
rx_pin: RX
baud_rate: 9600
data_bits: 8
parity: NONE
stop_bits: 1
rx_buffer_size: 1024
debug:
direction: BOTH
dummy_receiver: false
after:
delimiter: "\n"
sequence:
- lambda: UARTDebug::log_hex(direction, bytes, ' ');

sml:
id: pv_sm
uart_id: uart_2

sensor:
- platform: sml
name: "PV Roof Provided Energy"
sml_id: pv_sm
obis_code: "1-0:1.8.0"
unit_of_measurement: kWh
accuracy_decimals: 1
state_class: total_increasing
device_class: energy
filters:
- multiply: 0.0001
```

### Anything in the logs that might be useful for us?

```txt
22:52:19][I][app:102]: ESPHome version 2023.8.3 compiled on Sep 25 2023, 22:51:27
[22:52:19][C][wifi:543]: WiFi:
[22:52:19][C][wifi:379]: Local MAC: 5C:CF:7F:39:DC:E2
[22:52:19][C][wifi:380]: SSID: [redacted]
[22:52:19][C][wifi:381]: IP Address: 192.168.178.40
[22:52:19][C][wifi:382]: BSSID: [redacted]
[22:52:19][C][wifi:384]: Hostname: 'smartmeter'
[22:52:19][C][wifi:386]: Signal strength: -70 dB ▂▄▆█
[22:52:19][C][wifi:390]: Channel: 6
[22:52:19][C][wifi:391]: Subnet: 255.255.255.0
[22:52:19][C][wifi:392]: Gateway: 192.168.178.1
[22:52:19][C][wifi:393]: DNS1: 192.168.178.1
[22:52:19][C][wifi:394]: DNS2: 0.0.0.0
[22:52:19][C][logger:301]: Logger:
[22:52:19][C][logger:302]: Level: DEBUG
[22:52:19][C][logger:303]: Log Baud Rate: 115200
[22:52:19][C][logger:305]: Hardware UART: UART1
[22:52:19][C][uart.arduino_esp8266:102]: UART Bus:
[22:52:19][C][uart.arduino_esp8266:104]: RX Pin: GPIO3
[22:52:19][C][uart.arduino_esp8266:106]: RX Buffer Size: 1024
[22:52:19][C][uart.arduino_esp8266:108]: Baud Rate: 9600 baud
[22:52:19][C][uart.arduino_esp8266:109]: Data Bits: 8
[22:52:19][C][uart.arduino_esp8266:110]: Parity: NONE
[22:52:19][C][uart.arduino_esp8266:111]: Stop bits: 1
[22:52:19][C][uart.arduino_esp8266:113]: Using hardware serial interface.
[22:52:19][C][sml:092]: SML:
[22:52:19][C][sml_sensor:033]: SML 'PV Roof Provided Energy'
[22:52:19][C][sml_sensor:033]: Device Class: 'energy'
[22:52:19][C][sml_sensor:033]: State Class: 'total_increasing'
[22:52:19][C][sml_sensor:033]: Unit of Measurement: 'kWh'
[22:52:19][C][sml_sensor:033]: Accuracy Decimals: 1
[22:52:19][C][sml_sensor:037]: OBIS Code: 1-0:1.8.0
[22:52:19][C][mdns:112]: mDNS:
[22:52:19][C][mdns:113]: Hostname: smartmeter
[22:52:19][C][ota:093]: Over-The-Air Updates:
[22:52:19][C][ota:094]: Address: smartmeter.local:8266
[22:52:19][C][ota:097]: Using Password.
[22:52:19][C][api:138]: API Server:
[22:52:19][C][api:139]: Address: smartmeter.local:6053
[22:52:19][C][api:141]: Using noise encryption: YES
[22:52:20][D][uart_debug:114]: <<< 01 4C 47 5A 02 08 00 FF 65 00 1C 01 04 00 52 03 69 00 00 00 00 00 00 01 41 84 44 16 62 00 62 00 02 1B 1B 1B 1B 1A 01 0E E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1B 1B 1B 1B 01 01 01 01 76 63 01 01 76 01 07 FF FF FF 00 01 4C 47 5A 00 03 CF FE FD 02 82 00 76 05 00 84 44 18 02 FF FF FF FF FF 0B 0A
[22:52:20][D][uart_debug:114]: <<< 01 0C 62 0A
[22:52:20][D][uart_debug:114]: <<< FF FF 72 62 01 65 00 01 01 01 01 01 01 04 4C 47 00 01 01 01 01 0B 0A
[22:52:20][W][component:204]: Component sml took a long time for an operation (0.07 s).
[22:52:20][W][component:205]: Components should block for at most 20-30ms.
[22:52:20][W][sml:116]: Checksum error in received SML data.
[22:52:21][D][uart_debug:114]: <<< 01 4C 47 00 02 08 00 FF 65 00 1C 01 04 24 35 69 00 00 00 00 00 00 15 00 84 44 19 62 00 62 00 00 1B 1B 1B 1B 1A 01 13 A2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1B 1B 1B 1B 01 01 01 01 06 AE AC 01 76 01 07 FF FF FF 00 28 4C 47 5A 00 03 CF FE FD 00 09 01 01 76 05 00 84 44 1B FF FF FF FF FF FF 0B 0A
[22:52:21][D][uart_debug:114]: <<< 01 00 62 0A
[22:52:21][D][uart_debug:114]: <<< FF FF 72 62 01 65 00 A6 01 01 01 01 01 04 4C 07 01 01 01 01 0B 0A
[22:52:21][W][component:204]: Component sml took a long time for an operation (0.07 s).
[22:52:21][W][component:205]: Components should block for at most 20-30ms.
[22:52:21][W][sml:116]: Checksum error in received SML data.
[22:52:22][D][uart_debug:114]: <<< 01 4C 07 00 02 08 00 FF 65 00 1C 01 79 52 03 69 00 00 00 00 00 00 76 05 00 84 44 1C 62 00 62 00 00 1B 1B 1B 1B 1A 01 1A FE 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1B 1B 1B 1B 01 01 01 01 72 63 01 01 76 01 07 FF FF 00 0A
[22:52:22][D][uart_debug:114]: <<< 01 4C 47 5A 00 03 CF FE 00 AC AC 0F 76 05 00 84 44 1E D0 FF FF FF FF FF 0B 0A
[22:52:22][D][uart_debug:114]: <<< 01 00 62 0A
[22:52:22][D][uart_debug:114]: <<< FF FF 72 62 01 65 C9 01 01 01 01 01 01 04 4C FF 01 01 01 01 0B 0A
[22:52:22][W][sml:116]: Checksum error in received SML data.
```

### Additional information

_No response_