ct-Open-Source / ct-Open-Source/tuya-convert
WiFI-W6B
- Dominant language
- Python
- Stars
- 5.1k
- Forks
- 523
- PR merge metrics
- No merged PRs in 30d
Description
I have a "No Neutral" 2 gang touch light switch. The markings on the board say WIFI-W6B and i can see a ESP8285 on board.
I can't get this to flash using tuya convert. The switch seems to connect to the AP and then immediatley comes out of pairing mode. Tuya convert just says
SmartConfig complete.
Resending SmartConfig Packets
over and over and then fails with
Device did not appear with the intermediate firmware
Check the *.log files in the scripts folder
Do you want to try flashing another device? [y/N] n
I have used the same setup to successfully flash smart plugs - so know my installation and method works - is there anything that would stop this switch from accepting tuya convert?
Contributor guide
No contributing guide indexed for this repository
Research direction
Start with the *.log files in the scripts folder and the SmartConfig/intermediate-firmware flow described in the report. Compare this device's behavior with the successful smart-plug setup; done means determining whether WIFI-W6B is supported and documenting a reproducible cause or next step.
Written by the indexing model from the issue text.
Assessment
- Tech stack
- python
- Domain
- embedded-iot
- Issue type
- Bug
- Difficulty
- 4/5
- Estimated time
- 3-5 days
- Activity status
- Stale
- Clarity
- Needs clarification
- Newbie friendliness
- 25/100