Device did not appear with the intermediate firmware with AWP07L

Hi All,

I have just succesfully flashed two Maxcio YX-DE02 samrtplugs with the tuya converter.
However, there is no way of flashing my AWP07L.
I tried 5 times and always get this error: Device did not appear with the intermediate firrmware.

Any suggestions?

[smarthack-mqtt.log](https://github.com/ct-Open-Source/tuya-convert/files/4237509/smarthack-mqtt.log)
[smarthack-psk.log](https://github.com/ct-Open-Source/tuya-convert/files/4237511/smarthack-psk.log)
[smarthack-udp.log](https://github.com/ct-Open-Source/tuya-convert/files/4237512/smarthack-udp.log)
[smarthack-web.log](https://github.com/ct-Open-Source/tuya-convert/files/4237513/smarthack-web.log)
[smarthack-wifi.log](https://github.com/ct-Open-Source/tuya-convert/files/4237514/smarthack-wifi.log)

Edit: NO vtrust-recovery ssid

Edit2: Device log:

ets Jan 8 2013,rst cause:1, boot mode:(3,7)

load 0x40100000, len 1396, room 16
tail 4
chksum 0x89
load 0x3ffe8000, len 776, room 4
tail 4
chksum 0xe8
load 0x3ffe8308, len 540, room 4
tail 8
chksum 0xc0
csum 0xc0

2nd boot version : 1.4(b1)
SPI Speed : 40MHz
SPI Mode : DOUT
SPI Flash Size & Map: 8Mbit(512KB+512KB)
jump to run user2 @ 81000

(And then the same paragraph again.... on and on)

Edit3: Original FW log:

ets Jan 8 2013,rst cause:1, boot mode:(3,7)

load 0x40100000, len 1396, room 16
tail 4
chksum 0x89
load 0x3ffe8000, len 776, room 4
tail 4
chksum 0xe8
load 0x3ffe8308, len 540, room 4
tail 8
chksum 0xc0
csum 0xc0

2nd boot version : 1.4(b1)
SPI Speed : 40MHz
SPI Mode : DOUT
SPI Flash Size & Map: 8Mbit(512KB+512KB)
jump to run user1 @ 1000

OS SDK ver: 1.4.2(78f3caf) compiled @ Oct 23 2017 13:45:35
phy veÚ[notice]user_main.c:294 SDK version:1.4.2(78f3caf)
[notice]user_main.c:296 tuya sdk version:2.0.4
[notice]user_main.c:301 tuya sdk compiled at Jun 27 2018 16:41:03
[notice]user_main.c:303 BV:5.29 PV:2.1 LPV:3.1
reset reason: 0
epc1=0x00000000, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000,depc=0x00000000
mode : softAP(00:0d:11:22:33:44)
dhcp server start:(ip:192.168.4.1,mask:255.255.255.0,gw:192.168.4.1)
add if1
bcn 100
bcn 0
del if1
usl
mode : sta(00:0d:11:22:33:44)
add if0
scandone
[notice]device.c:1628
FW Compiled Time Aug 24 2018 13:50:18

Start by comparing smarthack-mqtt.log, smarthack-psk.log, smarthack-udp.log, smarthack-web.log, and smarthack-wifi.log with the supplied AWP07L device and original-firmware boot logs. Done means determining why the intermediate firmware does not appear and documenting the confirmed cause or required next step.

Written by the indexing model from the issue text.