device did not appear with the intermediate firmware

I am trying to flash a Woox R5077 (tuya wifi bulb) wifi RGB GU10 lightbulb. Today i already did it succesfully with one, but i didn't use that bulb for some time with the tuya app. The one i'm trying now has been used recently with the tuya app and its firmware might have been updated?

Any suggestions for trying?

I get the following output from running start_flash.sh:
```
./start_flash.sh
Checking for network interface wlo1... Found.
Checking UDP port 53... Occupied by systemd-resolve with PID 2159.
Port 53 is needed to resolve DNS queries
Do you wish to terminate systemd-resolve? [y/N] y
Attempting to stop systemd-resolved.service
Checking UDP port 67... Available.
Checking TCP port 80... Available.
Checking TCP port 443... Available.
Checking UDP port 6666... Available.
Checking UDP port 6667... Available.
Checking TCP port 1883... Available.
Checking TCP port 8886... Available.
======================================================
Starting AP in a screen..
Starting web server in a screen
Starting Mosquitto in a screen
Starting PSK frontend in a screen
Starting Tuya Discovery in a screen

======================================================

IMPORTANT
1. Connect any other device (a smartphone or something) to the WIFI vtrust-flash
This step is IMPORTANT otherwise the smartconfig may not work!
2. Put your IoT device in autoconfig/smartconfig/pairing mode (LED will blink fast). This is usually done by pressing and holding the primary button of the device
Make sure nothing else is plugged into your IoT device while attempting to flash.
3. Press ENTER to continue

======================================================
Starting smart config pairing procedure
Waiting for the device to install the intermediate firmware
Put device in EZ config mode (blinking fast)
Sending SSID vtrust-flash
Sending wifiPassword
Sending token 00000000
Sending secret 0101
................
SmartConfig complete.
Resending SmartConfig Packets
.................
SmartConfig complete.
Resending SmartConfig Packets
..................
SmartConfig complete.
Resending SmartConfig Packets
.................
SmartConfig complete.
Resending SmartConfig Packets
..................
SmartConfig complete.
Resending SmartConfig Packets
..................
SmartConfig complete.
Resending SmartConfig Packets
.................
SmartConfig complete.
Resending SmartConfig Packets
.................
SmartConfig complete.
Resending SmartConfig Packets
.................
SmartConfig complete.
Resending SmartConfig Packets
................
SmartConfig complete.
Resending SmartConfig Packets
..........
Device did not appear with the intermediate firmware
Check the *.log files in the scripts folder
Do you want to try flashing another device? [y/N] n

```

Logs
[smarthack-mqtt.log](https://github.com/ct-Open-Source/tuya-convert/files/4008288/smarthack-mqtt.log)
[smarthack-psk.log](https://github.com/ct-Open-Source/tuya-convert/files/4008289/smarthack-psk.log)
[smarthack-udp.log](https://github.com/ct-Open-Source/tuya-convert/files/4008290/smarthack-udp.log)
[smarthack-web.log](https://github.com/ct-Open-Source/tuya-convert/files/4008291/smarthack-web.log)
[smarthack-wifi.log](https://github.com/ct-Open-Source/tuya-convert/files/4008292/smarthack-wifi.log)