Timed out while waiting for the device to (re)connect

Hello All,

I have been trying to flash some light bulbs using this, and seem to be running into some challenges. I looked through many other similar issues posted, but have not found one that seems to be exactly the same as mine. I am running the most recent version of Pi OS on a pi 4b.
I am getting the follow.
======================================================
Starting smart config pairing procedure
Waiting for the device to install the intermediate firmware
Put device in EZ config mode (blinking fast)
Sending SSID vtrust-flash
Sending wifiPassword
Sending token 00000000
Sending secret 0101
................
SmartConfig complete.
Auto retry in 2s. .....................................................................
Timed out while waiting for the device to (re)connect
======================================================
Attempting to diagnose the issue...
An ESP82xx based device connected according to your wifi log.
If this is the device you are trying to flash, another issue may be preventing it from
Otherwise, it could be that the device does not use an ESP82xx or it did not connect.
For additional information, check the *.log files inside the scripts folder.
Please include these logs when opening a new issue on our GitHub issue tracker.

[smarthack-mqtt.log](https://github.com/ct-Open-Source/tuya-convert/files/13780107/smarthack-mqtt.log)
[smarthack-psk.log](https://github.com/ct-Open-Source/tuya-convert/files/13780108/smarthack-psk.log)
[smarthack-udp.log](https://github.com/ct-Open-Source/tuya-convert/files/13780109/smarthack-udp.log)
[smarthack-web.log](https://github.com/ct-Open-Source/tuya-convert/files/13780110/smarthack-web.log)
[smarthack-wifi.log](https://github.com/ct-Open-Source/tuya-convert/files/13780111/smarthack-wifi.log)

Appreciate the help in advance :)

Start by reviewing the attached smarthack-mqtt.log, smarthack-psk.log, smarthack-udp.log, smarthack-web.log, and smarthack-wifi.log, then inspect the relevant scripts in the scripts folder. Determine why the ESP82xx device does not reconnect after SmartConfig and provide a reproducible diagnosis or fix supported by the logs.

Written by the indexing model from the issue text.