Ethernet2 v2 shield schematics is not up-to-date

Shipped ethernet2 shield [https://store.arduino.cc/arduino-ethernet-shield-2](https://store.arduino.cc/arduino-ethernet-shield-2) are identical to the picture on Arduino Store website : [https://store-cdn.arduino.cc/uni/catalog/product/cache/1/image/500x375/f8876a31b63532bbba4e781c30024a0a/a/0/a000024_featured_3.jpg](https://store-cdn.arduino.cc/uni/catalog/product/cache/1/image/500x375/f8876a31b63532bbba4e781c30024a0a/a/0/a000024_featured_3.jpg)
But we can see few components which are not on PDF schematics nor eagle files. The 2 diodes on top of rainbow connectors, the 4 SMD logic gates at bottom of rainbow connectors and a pullup resistor on D4 are missing.
Please update the schematics of the Ethernet2 shield.

Start by locating the Ethernet2 shield PDF schematics and Eagle design files referenced by the issue, then compare them with the shipped shield and the linked product image. Done means the two diodes, four SMD logic gates, and D4 pull-up resistor are represented in the updated schematics and Eagle files.

Written by the indexing model from the issue text.