Support sscx pressure sensor over I2C in msb.c
Nobody has claimed this yet.
Assessment
- Difficulty
- 4/5
- Estimated time
- 3-5 days
- Newbie friendliness
- 25/100
- Issue type
- Feature
- Clarity
- Needs clarification
- Activity status
- Stale
- Tech stack
- c
- Domain
- embedded-iot
Research direction
Start by reading msb.c and locating how existing hardware drivers are integrated. Then inspect the embedded-base driver referenced in the proposal and determine the required behavior for the SSCX pressure sensor over I2C; done is support for that sensor, though the issue does not define testable acceptance criteria.
Written by the indexing model from the issue text.
Description
Description
Add support for pressure sensor over I2C in msb.c
Acceptance Criteria
Do it.
Proposed Solution
Use the embedded-base driver.
- Dominant language
- C
- Stars
- 0
- Forks
- 0
- Avg merge
- 1m
- Merged PRs (30d)
- 1
Contributor guide
No contributing guide indexed for this repository
First steps
- Read the whole issue, then the project's contributing guide.
- Comment on the issue to say you are picking it up — it saves two people doing the same work.
- Fork the repository and make your change on a branch.
- Open a pull request that references the issue number.
Similar issues
-
[adam] AdamNet network read doesn't cap to MAX_ADAM_PACKET_LEN, overflows client receive buffers Open
Difficulty 2/5 1-3 hours Newbie friendliness 88/100
FujiNetWIFI/fujinet-firmware#1649 · 2 comments ·
-
Difficulty 2/5 1-3 hours Newbie friendliness 68/100
HarbourMasters/Shipwright#7229 ·
-
Difficulty 2/5 1-3 hours Newbie friendliness 72/100
riscv-software-src/riscv-isa-sim#2435 · 1 comment ·
-
bug Self Built Image SNAPSHOT Supported Device target/ramips
Difficulty 2/5 1-3 hours Newbie friendliness 88/100
-
Difficulty 2/5 1-3 hours Newbie friendliness 76/100