[SNZB-02DR2 / SONOFF] ??? external temp and hum lost

What happened?

After updating the SNZB-02DR2 sensor, the ability to transmit temperature and humidity data from the external Sonoff sensor was lost.
ID firmware: 1.0.5
20260814
Wersja firmware: 4101

What did you expect to happen?

No response

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

2.14.1 (unknown)

Adapter firmware version

{"build":0,"ezsp":13,"major":7,"minor":4,"patch":5,"revision":"7.4.5 [GA]","special":0,"type":170}

Adapter

EmberZNet

Setup

os: #1 SMP PREEMPT_DYNAMIC Thu Jul 30 12:31:10 UTC 2026 - 6.18.39-haos - x64
node: v24.18.1
ha: true

Device database.db entry

No response

Debug log

No response

Notes

Device

definition: SNZB-02DR2 - SONOFF (v0.0.0)
software_build_id: 1.0.5
date_code: 20260814
endpoints:

{"1":{"bindings":[{"cluster":"genPollCtrl","target":{"endpoint":1,"ieee_address":"0x180df9fffee2bc8c","type":"endpoint"}},{"cluster":"genPowerCfg","target":{"endpoint":1,"ieee_address":"0x180df9fffee2bc8c","type":"endpoint"}},{"cluster":"msTemperatureMeasurement","target":{"endpoint":1,"ieee_address":"0x180df9fffee2bc8c","type":"endpoint"}},{"cluster":"msRelativeHumidity","target":{"endpoint":1,"ieee_address":"0x180df9fffee2bc8c","type":"endpoint"}}],"clusters":{"input":["genBasic","genPowerCfg","genIdentify","msTemperatureMeasurement","msRelativeHumidity","genPollCtrl","manuSpecificAmazonWWAH","customSonoffSnzb02dr2"],"output":["genTime","genOta"]},"configured_reportings":[{"attribute":"batteryPercentageRemaining","cluster":"genPowerCfg","maximum_report_interval":65000,"minimum_report_interval":3600,"reportable_change":10},{"attribute":"batteryVoltage","cluster":"genPowerCfg","maximum_report_interval":65000,"minimum_report_interval":3600,"reportable_change":10},{"attribute":"measuredValue","cluster":"msTemperatureMeasurement","maximum_report_interval":3600,"minimum_report_interval":10,"reportable_change":100},{"attribute":"measuredValue","cluster":"msRelativeHumidity","maximum_report_interval":3600,"minimum_report_interval":10,"reportable_change":100}],"scenes":[]}}

Health

time: Sat Sep 12 2026 23:24:46 GMT+0200 (Central European Summer Time)
os.load_average: 0.02, 0.05, 0.01
os.memory_percent: 39.2672
process.memory_percent: 4.3793
process.uptime_sec: 255608

{"leave_count":0,"messages":7583,"messages_per_sec":0.0297,"network_address_changes":0}

Start by reproducing the SNZB-02DR2 issue on firmware 1.0.5 with Zigbee2MQTT 2.14.1 and collect the missing debug log and database.db entry. Compare the reported temperature and humidity clusters and configured reportings with behavior before the update; done means external sensor readings are transmitted again.