CubeOrange-SimOnHardWare FAILS! With default params

Git Hash [1ebd4d99](https://github.com/ArduPilot/ardupilot/commit/1ebd4d996e8b6bbeb1462a9655c00aa861d5beef) :

Default parameters path from hwdef: /workdir/Plane-CubeOrange-SimOnHardWare-f7a86317fcf9c8e88a653ea2d02a27c8/build_src/libraries/AP_HAL_ChibiOS/hwdef/CubeOrange-SimOnHardWare/defaults.parm
Writing hwdef setup in /workdir/Plane-CubeOrange-SimOnHardWare-f7a86317fcf9c8e88a653ea2d02a27c8/CubeOrange-SimOnHardWare/hwdef.h
MCU Flags: cortex-m7 ['-mcpu=cortex-m7', '-mfpu=fpv5-d16', '-mfloat-abi=hard']
Writing DMA map
Error: Bootloader (./Tools/bootloaders/CubeOrange-SimOnHardWare_bl.bin) does not exist and AP_BOOTLOADER_FLASHING_ENABLED
Please run: Tools/scripts/build_bootloaders.py CubeOrange-SimOnHardWare

Failed to process hwdef.dat ret=1
(complete log in /workdir/Plane-CubeOrange-SimOnHardWare-f7a86317fcf9c8e88a653ea2d02a27c8/config.log)
Running clean
The project was not configured: run "waf configure" first!
Running build
The project was not configured: run "waf configure" first!
done build

Start with the reported hwdef processing failure and Tools/scripts/build_bootloaders.py. Run the documented CubeOrange-SimOnHardWare bootloader build command, then retry the affected Plane build with the default parameters; done means the bootloader exists at the reported path and configuration proceeds past hwdef processing.

Written by the indexing model from the issue text.