Config file applied incorrectly

### Fill out information requested in this template, without doing so issue will be ignored & closed!

#### Before submitting an issue, it is strongly recommended to use the **[auto-cpufreq-genAI-chatbot](https://foolcontrol.org/?p=4903)** to get an immediate answer to your question.

### Have you tried?

- [Searching through existing/closed issues](https://github.com/AdnanHodzic/auto-cpufreq/issues) to see if your bug has already been already submitted?
- If installation failed with [auto-cpufreq-installer](https://github.com/AdnanHodzic/auto-cpufreq/#auto-cpufreq-installer),have you tried installing auto-cpufreq using [Snap package](https://github.com/AdnanHodzic/auto-cpufreq/#snap-store)?
- Have you tried [configuring auto-cpufreq](https://github.com/AdnanHodzic/auto-cpufreq/#configuring-auto-cpufreq)?
- Have you tried suggestions in [troubleshooting section](https://github.com/AdnanHodzic/auto-cpufreq#troubleshooting)?

### Error output:
```text
Add/paste error output in case of failed installation or other failing component
```
---

### System information:

Add/paste output of:

```
Using settings defined in /etc/auto-cpufreq.conf file

-------------------------------------------------------------------------------

Linux distro: Ubuntu 24.04 Noble Numbat
Linux kernel: 6.11.0-24-generic
Processor: 13th Gen Intel(R) Core(TM) i9-13900HX
Cores: 32
Architecture: x86_64
Driver: intel_pstate

------------------------------ Current CPU stats ------------------------------

CPU max frequency: 5400 MHz
CPU min frequency: 800 MHz

Core Usage Temperature Frequency
CPU0 0.0% 55 °C 800 MHz
CPU1 0.0% 55 °C 800 MHz
CPU2 0.0% 56 °C 3226 MHz
CPU3 0.0% 56 °C 1122 MHz
CPU4 3.0% 54 °C 4517 MHz
CPU5 0.0% 54 °C 800 MHz
CPU6 0.0% 53 °C 800 MHz
CPU7 0.0% 53 °C 800 MHz
CPU8 1.0% 54 °C 800 MHz
CPU9 0.0% 54 °C 842 MHz
CPU10 0.0% 50 °C 800 MHz
CPU11 0.0% 50 °C 800 MHz
CPU12 0.0% 49 °C 800 MHz
CPU13 0.0% 49 °C 800 MHz
CPU14 0.0% 54 °C 800 MHz
CPU15 0.0% 54 °C 800 MHz
CPU16 0.0% 58 °C 800 MHz
CPU17 0.0% 58 °C 3241 MHz
CPU18 0.0% 58 °C 800 MHz
CPU19 0.0% 58 °C 800 MHz
CPU20 0.0% 52 °C 800 MHz
CPU21 0.0% 52 °C 800 MHz
CPU22 0.0% 52 °C 800 MHz
CPU23 0.0% 52 °C 800 MHz
CPU24 0.0% 57 °C 3476 MHz
CPU25 0.0% 57 °C 800 MHz
CPU26 0.0% 57 °C 800 MHz
CPU27 0.0% 57 °C 800 MHz
CPU28 0.0% 53 °C 800 MHz
CPU29 1.0% 53 °C 2438 MHz
CPU30 0.0% 53 °C 800 MHz
CPU31 0.0% 53 °C 3900 MHz

CPU fan speed: 1681 RPM

CPU fan speed: 1681 RPM

auto-cpufreq version: 2.5.0

Python: 3.12.3
psutil package: 7.0.0
platform package: 1.0.8
click package: 8.1.8
distro package: 1.9.0

Computer type: Notebook
Battery is: charging

auto-cpufreq system resource consumption:
cpu usage: 0.0 %
memory use: 0.13 %

Total CPU usage: 0.3 %
Total system load: 0.76
Average temp. of all cores: 54.00 °C

Currently using: performance governor
Currently turbo boost is: on

-------------------------------------------------------------------------------

```

Also please be descriptive about the issue you're reporting, i.e: what you tried & what's the expected behaviour.

---

Device info: laptop with ubuntu installed.

I am trying to setup a config file to have between 1.2GHz and 5.4GHz with **performance** governor when plugged in, and between 800Mhz and 3.4GHz when on battery mode with governor **powersave**.
Here is my config file which is based on the example one:
```
# settings for when connected to a power source
[charger]
# see available governors by running: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
# preferred governor.
governor = performance

# EPP: see available preferences by running: cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences
energy_performance_preference = performance

# EPB (Energy Performance Bias) for the intel_pstate driver
# see conversion info: https://www.kernel.org/doc/html/latest/admin-guide/pm/intel_epb.html
# available EPB options include a numeric value between 0-15
# (where 0 = maximum performance and 15 = maximum power saving),
# or one of the following strings:
# performance (0), balance_performance (4), default (6), balance_power (8), or power (15)
# if the parameter is missing in the config and the hardware supports this setting, the default value will be used
# the default value is `balance_performance` (for charger)
# energy_perf_bias = balance_performance

# Platform Profiles
# https://www.kernel.org/doc/html/latest/userspace-api/sysfs-platform_profile.html
# See available options by running:
# cat /sys/firmware/acpi/platform_profile_choices
# platform_profile = performance

# minimum cpu frequency (in kHz)
# example: for 800 MHz = 800000 kHz --> scaling_min_freq = 800000
# see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
# to use this feature, uncomment the following line and set the value accordingly
# scaling_min_freq = 800000
scaling_min_freq = 1200000

# maximum cpu frequency (in kHz)
# example: for 1GHz = 1000 MHz = 1000000 kHz -> scaling_max_freq = 1000000
# see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
# to use this feature, uncomment the following line and set the value accordingly
# scaling_max_freq = 1000000
scaling_max_freq = 5400000

# turbo boost setting. possible values: always, auto, never
turbo = auto

# this is for ignoring controllers and other connected devices battery from affecting
# laptop preformence
# [power_supply_ignore_list]

# name1 = this
# name2 = is
# name3 = an
# name4 = example

# settings for when using battery power
[battery]
# see available governors by running: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
# preferred governor
governor = powersave

# EPP: see available preferences by running: cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences
energy_performance_preference = power

# EPB (Energy Performance Bias) for the intel_pstate driver
# see conversion info: https://www.kernel.org/doc/html/latest/admin-guide/pm/intel_epb.html
# available EPB options include a numeric value between 0-15
# (where 0 = maximum performance and 15 = maximum power saving),
# or one of the following strings:
# performance (0), balance_performance (4), default (6), balance_power (8), or power (15)
# if the parameter is missing in the config and the hardware supports this setting, the default value will be used
# the default value is `balance_power` (for battery)
# energy_perf_bias = balance_power

# Platform Profiles
# https://www.kernel.org/doc/html/latest/userspace-api/sysfs-platform_profile.html
# See available options by running:
# cat /sys/firmware/acpi/platform_profile_choices
# platform_profile = low-power

# minimum cpu frequency (in kHz)
# example: for 800 MHz = 800000 kHz --> scaling_min_freq = 800000
# see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
# to use this feature, uncomment the following line and set the value accordingly
# scaling_min_freq = 800000
scaling_min_freq = 800000

# maximum cpu frequency (in kHz)
# see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
# example: for 1GHz = 1000 MHz = 1000000 kHz -> scaling_max_freq = 1000000
# to use this feature, uncomment the following line and set the value accordingly
# scaling_max_freq = 1000000
scaling_max_freq = 3400000

# turbo boost setting. possible values: always, auto, never
turbo = auto

# experimental

# Add battery charging threshold (currently only available to Lenovo)
# checkout README.md for more info

# enable thresholds true or false
#enable_thresholds = true
#
# start threshold (0 is off ) can be 0-99
#start_threshold = 0
#
# stop threshold (100 is off) can be 1-100
#stop_threshold = 100
```
Strangely, plugging in or out won't change the governor, and the max/min is between 5.5 GHz and 800MHz.
I have tried rebooting and re-installing, but nothing seems to work.
Could someone help?