Nvidia GPU not using all it's power when using auto-cpufreq

### Fill out information requested in this template, without doing so issue will be ignored & closed!

### Have you tried?

- [Searching through existing/closed issues](https://github.com/AdnanHodzic/auto-cpufreq/issues) to see if your bug has already been already submitted? **Yes**
- If installation failed with [auto-cpufreq-installer](https://github.com/AdnanHodzic/auto-cpufreq/#auto-cpufreq-installer),have you tried installing auto-cpufreq using [Snap package](https://github.com/AdnanHodzic/auto-cpufreq/#snap-store)? **Not applicable**
- Have you tried [configuring auto-cpufreq](https://github.com/AdnanHodzic/auto-cpufreq/#configuring-auto-cpufreq)? **Yes**
- Have you tried suggestions in [troubleshooting section](https://github.com/AdnanHodzic/auto-cpufreq#troubleshooting)? **Yes and it's actually worse with acpi than pstate**

---

### System information:

Add/paste output of:

```
mimillie@tataru-os:~/auto-cpufreq$ sudo auto-cpufreq --debug

Using settings defined in /etc/auto-cpufreq.conf file
could not get value from conservation mode

-------------------------------- Battery Info ---------------------------------

battery count = 1
ERROR: failed to read BAT0 thresholds: [Errno 2] No such file or directory: '/sys/class/power_supply/BAT0/charge_start_threshold'

-------------------------------------------------------------------------------

Linux distro: Fedora Linux 40 Silverblue
Linux kernel: 6.8.10-300.fc40.x86_64
Processor: 13th Gen Intel(R) Core(TM) i9-13905H
Cores: 20
Architecture: x86_64
Driver: intel_pstate

------------------------------ Current CPU stats ------------------------------

CPU max frequency: 2600 MHz
CPU min frequency: 400 MHz

Core Usage Temperature Frequency
CPU0 0.0% 51 °C 1221 MHz
CPU1 0.0% 51 °C 400 MHz
CPU2 1.0% 50 °C 400 MHz
CPU3 0.0% 50 °C 400 MHz
CPU4 7.1% 47 °C 971 MHz
CPU5 0.0% 47 °C 400 MHz
CPU6 11.0% 48 °C 1635 MHz
CPU7 0.0% 48 °C 400 MHz
CPU8 3.9% 47 °C 399 MHz
CPU9 0.0% 47 °C 400 MHz
CPU10 5.0% 47 °C 1531 MHz
CPU11 2.0% 47 °C 400 MHz
CPU12 2.0% 51 °C 400 MHz
CPU13 3.0% 51 °C 795 MHz
CPU14 0.0% 51 °C 919 MHz
CPU15 3.9% 51 °C 400 MHz
CPU16 1.0% 49 °C 400 MHz
CPU17 1.0% 49 °C 1154 MHz
CPU18 4.0% 49 °C 900 MHz
CPU19 0.0% 49 °C 1637 MHz

auto-cpufreq version: 2.3.0 (git: 3f6d7a3)

Python: 3.12.3
psutil package: 5.9.8
platform package: 1.0.8
click package: 8.1.7
distro package: 1.9.0

Computer type: Notebook
Battery is: charging

auto-cpufreq system resource consumption:
cpu usage: 0.0 %
memory use: 0.05 %

Total CPU usage: 2.4 %
Total system load: 0.76
Average temp. of all cores: 49.00 °C

Currently using: powersave governor
Currently turbo boost is: off

-------------------------------------------------------------------------------
```

Hello, So since I'm trying to use auto-cpufreq on all my laptops, I had the same issue which is super annoying on newer laptops. Nvidia Power stay at the lowest possible like if I'm on energy saving and on battery with power-profile-daemon. that results in half the available wattage to not being used by my GPU which is a deal breaker.

Here are the differences on my laptop :

**Without auto-cpufreq (plugged in)**


**With auto-cpufreq (plugged in)**


I've tried to :
- set power profile daemon to performance before using auto-cpufreq
- setting governor to performance with --force performance
- using feral gamemode (just in case don't ask why I've tried this...)

Additional info :
The screenshots you see have been taken while running Unigine Superposition on the Nvidia GPU.

If anyone could help that would be nice.
Thanks and have a nice day :)

---