DAPLink based on STM32F103xb can't reset after programming
Open
- Dominant language
- C
- Stars
- 2.8k
- Forks
- 1.1k
- Avg merge
- 3d 12h
- Merged PRs (30d)
- 1
Description
I have a DAPLink based on STM32F103CBT6, when I program into another chip such as STM32F103C8T6 with the keil5 and I have checked "reset and run",after programming the STM32F103C8T6 cannot auto reset and run.
Contributor guide
Research direction
No source file, test, or entry point is identified in the issue. Reproduce the failure with the STM32F103CBT6-based DAPLink, an STM32F103C8T6 target, and Keil5 with “reset and run” enabled, then trace the firmware’s programming and reset handling. Done means the target automatically resets and runs after programming.
Written by the indexing model from the issue text.
Assessment
- Tech stack
- c
- Domain
- embedded-iot
- Issue type
- Bug
- Difficulty
- 4/5
- Estimated time
- 3-5 days
- Activity status
- Stale
- Clarity
- Needs clarification
- Newbie friendliness
- 25/100